• Fibers and Polymers
• /
• 제5권4호
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• Composites Research
• /
• 제34권3호
• /
• pp.180-185
• /
• 2021

Due to the formation of random three dimensional network structure, which cause a lot of scattering of phonons, the thermal conductivity is low when the liquid crystalline epoxy is cured with amine-based curing agent. This problem is solved by using a cationic initiator that can make mesogen groups to be stacked structure. In this experiment, the thermal stability is compared by investigating the activation energy of isothermal decomposition through TGA of an epoxy using an amine-based curing agent and a cationic initiator. As a result, the energy of the activation of the epoxy using a cationic initiator is high. Compared with the previous experiments, the thermal stability is similar to the thermal conductivity.

• Journal of Korean Society of Environmental Engineers
• /
• 제34권11호
• /
• pp.735-742
• /
• 2012

This study tried to find a suitable method for enhancing the foam stability of cationic surfactants that normally generate less foam or no foam. Several trials were made to enhance the foam stability: addition of anionic surfactant, colloids and polymer. Cationic starch (CA-ST) did not form foam at all, while the foam stability of two other cationic surfactant also showed low levels; methyl triethanol ammonium methyl sulfate distearyl ester (CEQ90) for 46 sec. and Cetyl trimethyl ammonium chloride (CM29) for 31 seconds. Foam stability of cationic surfactants were significantly affected by addition of anionic surfactant, sodium dodecyl sulfate (SDS). Foam stability of CA-ST was significantly enhanced by addition of SDS, while those of CEQ90 and CM29 were decreased. Addition of colloids ($SiO_2$, kaolin) and polyvinyl alcohol (PVA) enhanced foam stabilities of CEQ90 and CM29. However, CA-ST did not form foam even in the presence of colloids or PVA. Effect of simultaneous addition of colloids and anionic surfactant on foam stability of cationic surfactant showed that foam stability of cationic surfactant was more influenced by addition of anionic surfactant than colloids. Effect of simultaneous addition of PVA and anionic surfactant on the foam stability of cationic surfactant also showed that presence of anionic surfactant significantly affect the foam stability of cationic surfactant. Foam stability of CA-ST was greatly increased to 8,780 seconds by addition of SDS 0.14% and PVA 2.5%. The foam stability of CA-ST was 8 times higher than CEQ 90. This study suggested that cationic surfactants not forming foam can generate foam by addition of anionic surfactant and its stability can be additionally increased by addition of colloids and PVA. The study results showed that enhancement in foam stability of cationic surfactant was prominently affected by the concentration of anionic surfactant added.

• Macromolecular Research
• /
• 제9권4호
• /
• pp.206-209
• /
• 2001

One of the approaches to obtain functional polymer is polymerization of a monomer having two functional groups. Although polymerization of a monomer having two different types of functional group is general, the author has been interested in the polymerization of a monomer having two similar types of functional group. This work shows the preparation and selective polymerization of 4-methylene-2-styryl-1,3-dioxolane having two similar reactive double bonds via cationic polymerization at ambient temperature. Cationic ring-opening polymerization of 4-methylene-2-styryl-1,3-dioxolane using benzylsulfonium salt as a photo-initiator quantitatively afforded high molecular weight of poly(keto-ether).

• Textile Coloration and Finishing
• /
• 제4권1호
• /
• pp.10-15
• /
• 1992

Differential dyeing technologies for wool are discussed in one bath dyeing of cationic compound treated wool and untreated wool. By increasing the concentration of cationic compound to wool the k/s value of wool and the color difference (ΔE) between treated and untreated one become higher in one bath dyeing. The proper concentration of cationic compound to wool was 2% in one bath dyeing since the dyeing fastness became lower according to the increase of the concentration.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.20-25
• /
• 2006

The alkaline dissolution behavior of sea-island type polyarnide microfibers were successfully monitored using a cationic dye staining method. Weight reduction behavior of the alkali-treated microfiber fabrics and the treated fabrics stained with cationic dye were investigated in a comparative manner. The termination of dissolution monitored by both methods was also confirmed by scanning electron microscopy.

• YAKHAK HOEJI
• /
• 제21권3호
• /
• pp.135-140
• /
• 1977

Solubilization of cholesterol, its fatty acid esters and gallstones were undertaken employing nonionic, anionic and cationic surfactants. Cholesterol was effectively solubilized by all of these surfactants. Cationic surfactants were most effective. However, cholesteryl myristate was not solubilized at all. In the dissolution test of gallstones in surfactant solutions, cationic surfactant solutions were exceptionally effective in dissolving gallstones. These results suggest the possible existence of interaction between alkylammonium radical and cholesterol on micellar surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제34권4호
• /
• pp.7-15
• /
• 2002

It is of critical importance to understand the characteristics of papermaking additives and their reaction mechanisms to fully utilize the benefits they provide. Among the papermaking additives, retention aids play critical roles in improving productivity, product quality and process economy. Diverse research efforts to understand the reaction mechanisms between cationic polymers and anionic microparticles have been made since microparticle retention systems were introduced into the market. And it is most commonly accepted that flocs formed by the addition of cationic polymers are dispersed by shear force and the broken flocs are reflocculated instantly with the addition of microparticles. There are still many unanswered questions, however, on the reaction phenomena between cationic polymers and anionic microparticles. In this study, several cationic polymers including waxy maize starch, com starch and guar gum were used to investigate their retention efficiency when they were used along with anionic colloidal silica.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권4호
• /
• pp.279-283
• /
• 2001

Cationic lipid emulsion system consisting of 1, 2-dioleoyl-sn-slycero-3-trimethyl-ammonium-propane(DOTAP) and plasmin DNA with various counterions in the lipid headgroups were prepared. The transfection activity of the cationic lipid emulsion systems was then investigated in vitro and in vivo. The complex formation of plasmid DNA lipid emulsion was affected by the counterions through charged headgroup repulsion and also by the salt concen-tration in the media. As such , the transfection activity of the DOTAP emulsion system can be controlled by changing the counterions.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권1호
• /
• pp.57-62
• /
• 2002

Cationic liposomes complexed with DNA have been extensively utilized for the delivery of reporter or therapeutic genes both in culture and in vivo. We investigated and determined the optimum conditions of a cationic liposome, composed of dimethyldioctadecy-lammonium bromide (DDAB) and dioleoyl phosphati-dylethanolamine UOPE), mediated a reporter plasmid expressing luciferase into insect cell lines (Sf-21 and Bm-N) and silkworm larvae. Together the data demonstrated that Bombyx mori nuclear polyhedrosis virus (BmNPV) genomic DNA (128 kb) was successfully transfected into Bm-5 cells using this liposome. These results suggest that DDAB/DOPE liposome will be useful as delivery agents for gene transfer to insect cells both in vitro and in vivo.