• Journal of Microbiology and Biotechnology
• /
• 제21권2호
• /
• pp.154-161
• /
• 2011

L. lactis sk071115 has been shown to grow more actively and generate lower levels of lactate in glucose-defined medium with nitrate than in medium with Mn(IV). By adding Mn(IV) to a L. lactis culture, lactate production was relatively reduced in combination with Mn(II) production, but cell mass production levels did not increase. Both cell-free extract and intact L. lactis cells reacted electrochemically with Mn(IV) but did not react with Mn(II) upon cyclic voltammetry using neutral red (NR) as an electron mediator. A modified graphite felt cathode with NR (NR-cathode) was employed to induce electrochemical reducing equivalence for bacterial metabolism. Cell-free L. lactis extract catalyzed the reduction of Mn(IV) to Mn(II) under both control and electrochemical reduction conditions; however, the levels of Mn(II) generated under electrochemical reduction conditions were approximately 4 times those generated under control conditions. The levels of Mn(II) generated by the catalysis of L. lactis immobilized in the NR-cathode (L-NR-cathode) under electrochemical reduction conditions were more than 4 times that generated under control conditions. Mn(II) production levels were increased by approximately 2.5 and 4.5 times by the addition of citrate to the reactant under control and electrochemical reduction conditions, respectively. The cumulative Mn(II) produced from manganese ore by catalysis of the L-NR-cathode for 30 days reached levels of approximately 3,800 and 16,000 mg/l under control and electrochemical reduction conditions, respectively. In conclusion, the electrochemical reduction reaction generated by the NR-cathode activated the biochemical reduction of Mn(IV) to Mn(II) by L. lactis.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.75-81
• /
• 2010

The feasibility of using the thin film technology in utilizing lanthanum strontium manganite (LSM) for a solid oxide fuel cell (SOFC) cathode in a low-temperature regime is investigated in this study. Thin film LSM cathodes were fabricated using pulsed laser deposition (PLD) on anode-supported SOFCs with yttria-stabilized zirconia (YSZ) electrolytes. Although cells with a 1 ${\mu}m$-thick LSM cathode showed poor low-temperature cell performance compared to that of a cell with a bulk-processed cathode due to the lack of a triple-phase boundary length, the cell with 200 nm-thick gadolinia-doped ceria (GDC) inserted between the LSM and YSZ showed enhanced performance and more stable operation characteristics in a comparison of a cell without a GDC layer. We postulate that the GDC layer likely improved the cathode adhesion, therefore contributing to the improvement of the cell performance instead of serving as an interfacial reaction buffer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.17-18
• /
• 2007

Solid oxide fuel cells are clean, pollution-free technology for the electrochemical generation of electricity at high efficiency. Specially, the polarization resistance between electrolyte and electrode of SOFC unit cell is of importance, because it is desirable to develop SOFC operating at intermediate temperature below $800^{\circ}C$. The LSCF cathode prepared using modified oxalate method was investigated with different electrolyte. A precursor was prepared with oxalic acid, ethanol and $NH_4OH$ solution. The LSCF precursor was prepared at $80^{\circ}C$, and pH control was 2, 6, 8, 9 and 10. The precursor powder was calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. The crystal of LSCF powders show single phase at pH 2, 6, 8 and 9, and the average particle size was about $3{\mu}m$. The LSCF cathode with heat treatment at $1200^{\circ}C$ showed a plot of electric conductivity versus temperature. Unit cell prepared from the LSCF cathode, buffer layer between cathode and electrolyte and the LSGM, YSZ, ScSZ and CeSZ electrolyte. Also interface reaction between LSCF, buffer layer and electrolyte were measured by EPMA and the polarization resistance for unit cell with cycle measure using a Solatron 1260 analyzer.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.783-786
• /
• 2009

Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and ion chromatography(IC) were employed to analyze the thermal behavior of $Li_xCoO_2$ cathode material of lithium ion battery. The mass loss peaks appearing between 60 and 125 ${^{\circ}C}$ in TGA and the exothermic peaks with 4.9 and 7.0 J/g in DSC around 75 and 85 ${^{\circ}C}$ for the $Li_xCoO_2$ cathodes of 4.20 and 4.35 V cells are explained based on disruption of solid electrolyte interphase (SEI) film. Low temperature induced HF formation through weak interaction between organic electrolyte and LiF is supposed to cause carbonate film disruption reaction, $Li_2CO_3\;+\;2HF{\rightarrow}\;2LiF\;+\;CO_2\;+\;H_2O$. The different spectral DSC/TGA pattern for the cathode of 4.5 V cell has also been explained. Presence of ionic carbonate in the cathode has been identified by ion chromatography and LiF reported by early researchers has been used for explaining the film SEI disruption process. The absence of mass loss peak for the cathode washed with dimethyl carbonate (DMC) implies ionic nature of the film. The thermal behavior above 150 ${^{\circ}C}$ has also been analyzed and presented.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.216-222
• /
• 2022

The capacity of high nickel Li(Ni_xCo_yMn_1-x-y)O₂ (NCM, x ≥ 0.8) cathodes is known to rapidly decline, a serious problem that needs to be solved in a timely manner. It was reported that cathode materials with the {010} plane exposed toward the outside, i.e., a radial structure, can provide facile Li⁺ diffusion paths and stress buffer during repeated cycles. In addition, cathodes with a core-shell composition gradient are of great interest. For example, a stable surface structure can be achieved using relatively low nickel content on the surface. In this study, precursors of the high-nickel NCM were synthesized by coprecipitation in ambient atmosphere. Then, a transition metal solution for coprecipitation was replaced with a low nickel content and the coprecipitation reaction proceeded for the desired time. The electrochemical analysis of the core-shell cathode showed a capacity retention of 94 % after 100 cycles, compared to the initial discharge capacity of 184.74 mA h/g. The rate capability test also confirmed that the core-shell cathode had enhanced kinetics during charging and discharging at 1 A/g.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.225-232
• /
• 1997

고율 방전용 Li/SOCl2전지의 성능은 카본 양극에 의해 크게 영향을 받는다. 전지가 방전되는 동안 SOCl2의 환원은 다공성 카본 양극에서 일어나고 기공내에 방전반응 생성물-주로 LiCl-이 석출된다. 이러한 현상으로 양극 표면이 부동화되어 전지의 성능이 제한된다. 양극이 성능을 향상시키기 위해 양극이 표면밀도와 두께를 각각 변화시켜 양극 반쪽셀 정전류 방전실험(50mA/$\textrm{cm}^2$)을 행하였다. 실험 결과 0.04g/$\textrm{cm}^2$, 두께 1.4mm의 양극이 가장 좋은 특성을 보였다. 표면 밀도가 0.04 g/$\textrm{cm}^2$로 일정하고 두께가 0.8mm, 1.4mm의 양극에서 분극현상은 두께가 두꺼운 1.4mm양극에서 감소하였으며 방전경과시간과 방전용량(Ah/$\textrm{cm}^2$)이 증가하였다. 두 양극에 대한 기공률 측정 결과 두께 1.4mm양극이 두께 0.8mm양극보다 전체 기공부피가 크고 전지성능과 연관되는 mesopore(0.05 $\mu$m~0.5$\mu$m)와 macropore(>0.5$\mu$m)부피가 더 증가하였다. 방전 후 카본 양극의 표면분석 결과 등방결정과 판상구조 집합체 형태의 LiCl과 소량의 S를 확인하였다.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.83-89
• /
• 1996

The electrochemical spike oscillations at the nickel (Ni) electrode/(0.05M KHC$_{8}$H$_{4}$O$_{4}$) buffer solution (pH 9) interface have been studied using voltammetric and chronoamperometric methods. The nature of the periodic cathodic current spikes is the activation controlled currents due to the hydrogen evolution reaction and depends onthe fractioanl surface coverage of the adsorbed hydrogen intermediate or the cathodic potential. There is two kinds of the waveforms corresponding to two kinds of the cathodic current spike oscillations. The widths, periods, and amplitudes of the cathodic current spikes are 4 ms or 5ms, 151 ms or 302 ms, and < 30 mA or < 275 mA, respectively. The fast discharge and recombination reaction steps are 1.5 times and twice and faster than the slow discharge and recombination reaction steps. The fast and slow discharge and recombination reaction steps are 1.5 times and twice faster than the slow discharge and recombination reaction steps. The fast and slow discharge and recombination reactions corresponding to the fast and slow adsorption sites at the Ni cathode.

• 전기화학회지
• /
• 제4권3호
• /
• pp.125-131
• /
• 2001

용융탄산염 연료전지의 장기 운전시 각 전극별 분극의 변화를 Au, $CO_2/O_2$ 기준전극이 부착된 단위전지를 이용하여 성공적으로 해석하였다. 서로 다른 구성요소로 조합된 네 가지 단위 전지를 운전하며 각 전극의 분극을 해석한 결과, 이미 알려진 바와 같이 공기극의 분극 크기가 연료극의 경우보다 큰 것을 실험적으로 측정할 수 있었다. 고온 부식 방지를 위해 cell frame의 wet seal부분에 Al코팅을 한 전지는 6,000시간까지 성능을 유지하여 부식이 전지 성능 저하에 큰 역할을 하고 있음을 알 수 있었다. 한편, $LiCoO_2$가 코팅된 안정화 공기극은 일반적으로 사용되는 NiO 공기극보다 lithiation에 필요한 시간이 길어 운전 초기에 공기극 분극이 크고 성능이 낮았으나 지속적인 운전으로 공기극이 충분히 lithiation되면서 공기극의 분극이 작아지고 성능도 점차 증가하였다. $Li_2CO_3/Na_2CO_3$ 전해질을 사용한 전지는 운전 중 성능이 하락과 상승을 반복하는 진동현상을 보였는데 이는 연료극보다는 공기극의 영향으로 해석되었다. 대부분의 단위전지들이 급격한 성능 하락을 보였을 경우의 공기극 분극은 급격히 증가하였으며 이로써 용융탄산염 연료전지의 수명 향상을 위해서는 공기극의 개선이 필수적이라는 것을 알 수 있었다.

• 전기화학회지
• /
• 제12권2호
• /
• pp.155-161
• /
• 2009

리튬 2차전지는 휴대용 전자기기의 전원으로 사용되어 왔다. 최근 하이브리드 자동차, 전기자동차의 에너지 저장매체로써 적용으로 인해 시장 확대가 기대되고 있다. 양극 활물질은 리튬2차전지의 성능, 수명, 용량을 결정하는 물질이며, 급증하는 시장의 수요에 따라 양극 활물질을 대량으로 생산할 수 있는 기술을 개발하는 것이 시급하다. 본 연구에서 실제 양극 활물질($LiCoO_2$) 생산라인에서 가동 중인 소성로를 3D 모델링하였고, 수치적 해석을 통해 소성로 내부의 온도와 유동의 방향, 화학적 거동을 밝혀내었다. 결과로써, 생산량 증가로 인해 소성로에서 생성되는 $CO_2$ 농도가 증가하며 정체되는 지점을 확인하였고, TGA-DSC 실험을 통해 $CO_2$가 몰분율 15%이상에선 $LiCoO_2$의 적절한 형성에 영향을 주는 현상을 확인하였다. 또한 소성로의 형상변화와 공정조건의 변화를 통해 문제되는 $CO_2$를 원활히 배출할 수 있는 해결책을 제안하였다.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.126-136
• /
• 2021

The electrochemical performance of all-solid-state cells (ASSCs) based on sulfide electrolytes is critically affected by the undesirable interfacial reactions between oxide cathodes and sulfide electrolytes because of the high reactivity of sulfide electrolytes. Based on the concept that the interfacial reactions are highly dependent on the type of sulfide electrolyte, the electrochemical properties of the ASSCs prepared using three types of sulfide electrolytes were observed and compared. The Li2MoO4-LiI coating layer was also introduced to suppress the interfacial reactions. The cells using argyrodite electrolyte exhibited a higher capacity and Coulombic efficiency than the cells using 75Li2S-22P2S5-3Li2SO4 and Li7P3S11 electrolytes, indicating that the argyrodite electrolyte is less reactive with cathodes than other electrolytes. Moreover, the introduction of Li2MoO4-LiI coating on the cathode surface significantly enhanced the electrochemical performance of ASSCs because of the protection of coating layer. Pulverization of argyrodite electrolyte is also effective in increasing the capacity of cells because the smaller size of electrolyte particles improved the contact stability between the cathode and the sulfide electrolyte. The cyclic performance of cells was also enhanced by pulverized electrolyte, which is also associated with improved contact stability at the cathode/electrolyte. These results show that the introduction of Li2MoO4-LiI coating and the use of pulverized sulfide electrolyte can exhibit a synergic effect of suppressed interfacial reaction by the coating layer and improved contact stability owing to the small particle size of electrolyte.