• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.94-98
• /
• 2003

Carbon nanofibers (CNF) with uniform diameter and controlled size could be prepared from catalytic decomposition of $C_2H_2$ with the catalyst treated by mechnochemical(MC) process. The distribution and size of Ni catalyst can be governed by tuning grinding time using MC process. As a result, size and structure of CNF can be controlled. The effect of grinding time to the as-grown CNF was checked. CNFs with diameter from 10-70nm can be synthesized. CNFs with bundle formation sharing one tip were found for MC treated catalyst.

• Journal of the Korean Chemical Society
• /
• v.60 no.4
• /
• pp.251-256
• /
• 2016

This paper describes the synthesis of alkali metal salts of urea (ureates) and their application to the direct preparation of 4-nitrosoaniline from nitrobenzene via nucleophilic aromatic substitution of hydrogen. Sodium and potassium ureates were readily prepared from the reaction of urea with sodium hydride, metal methoxides, and metal hydroxides. The effect of ureates as nucleophiles on the conversion of nitrobenzene to 4-nitrosoaniline was investigated and compared with that of a urea-metal hydroxide mixture. It was found that the ureates were superior for producing 4-nitrosoaniline owing to their higher thermal stability of the ureate. The ureate obtained from the treatment of urea with sodium hydride gave the highest yield for the preparation of 4-nitrosoaniline. The ureates generated from the reaction of urea with metal hydroxide also gave high yields of 4-nitrosoaniline. Catalytic hydrogenation of 4-nitrosoaniline afforded polymer-grade 1,4-benzenediamine in quantitative yield.

• Carbon letters
• /
• v.5 no.3
• /
• pp.127-132
• /
• 2004

Chop molding composites and 2D carbon/carbon composites were manufactured by hot press molding method. Phenol resin of novolac type was used for matrix precursor and PAN-based carbon, PAN-based graphite and pitch-based carbon fiber were used for reinforcement and boron oxide was used for oxidation retardant. All of the composites were treated by $2000^{\circ}C$ and $2400^{\circ}C$ graphitization process, respectively. After graphitization process, amount of a boron residue in carbon/carbon composites is much according to irregularity of used raw materials. Under the presence of boron in carbon/carbon composites, catalytic effect of boron was a little at $2000^{\circ}C$ graphitization temperature. However, it was quite at $2400^{\circ}C$ graphitization.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.9
• /
• pp.1273-1281
• /
• 2020

Due to the broad host suitability of viral vectors and their high gene delivery capacity, many researchers are focusing on viral vector-mediated gene therapy. Among the retroviruses, foamy viruses have been considered potential gene therapy vectors because of their non-pathogenicity. To date, the prototype foamy virus is the only retrovirus that has a high-resolution structure of intasomes, nucleoprotein complexes formed by integrase, and viral DNA. The integration of viral DNA into the host chromosome is an essential step for viral vector development. This process is mediated by virally encoded integrase, which catalyzes unique chemical reactions. Additionally, recent studies on foamy virus integrase elucidated the catalytic functions of its three distinct domains and their effect on viral pathogenicity. This review focuses on recent advancements in biochemical, structural, and functional studies of foamy virus integrase for gene therapy vector research.

• International Journal of Automotive Technology
• /
• v.8 no.5
• /
• pp.533-542
• /
• 2007

The two stroke spark ignition engine is the greatest contributor of the total vehicular pollution in a country like India. It is therefore an item that requires great attention in order to reduce fuel consumption and its concomitant pollution. The use of strong magnetic charge in the fuel line gives a complete and clean burn so that power is increased while operating expenses are reduced. The magnetic flux on the fuel line dramatically reduces harmful exhaust emissions while increasing mileage, thereby saving money and improving engine performance. It increases combustion efficiency and provides higher-octane performance. The experimental results show that the magnetic flux on fuel reduces the carbon monoxide emission up to 13% in a base engine, 23% in a copper-coated engine and 29% in a zirconia-coated engine.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.774-776
• /
• 1994

Ab initio studies of simple model systems for the carboxypeptidase A active site indicate that penta-and hexa-coordinate Zn(II) complexes have comparable structural stabilities. These facile coordination structures can be responsible for the catalytic role. Although the hexa-coordinate Zn(II) complex is more stable in enthalpy than the penta-coordinate Zn(II) complex, the entropy effect makes the latter as stable as or slightly more stable in free energy than the former.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.7
• /
• pp.781-785
• /
• 1999

Ferrisilicates with MFI type structure were hydrothermally synthesized. The structural environments of iron in the ferrisilicates were characterized by XRD, SEM, IR, EPR, and ammonia-TPD. It has been shown that pH of the final gel mixture during the synthesis affects the crystal size, morphology, chemical composition and catalyticactivity. The results of the lattice parameters, IR, and EPR indicate the existence of a framework iron and the content of framework iron depends on pH of the synthesis gel. Finally, the catalytic activity of these zeolites was examined for the cyclohexane oxidation to cyclohexanol and cyclohexanone in the liquid phase. The conversion of this reaction was increased with increasing iron content of the framework lattice positions.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.993-999
• /
• 1998

Acid catalyzed hydrolysis of 1-phenoxyethyl propionate, Ⅰ, has been studied using the PM3 method in the gas phase. The first step of the reaction is the protonation of basic sites, three different oxygens in Ⅰ, producing three protonated species Ⅱ, Ⅲ and Ⅳ. All possible reaction pathways have been studied from each protonated structure. Changes in the reaction mechanisms have also been discussed from the results obtained by varying a nucleophile from a water monomer to a water dimer to a complex between one water molecule and an intermediate product (propionic acid or phenol) produced in the preceding unimolecular dissociation processes. Minimum energy reaction pathway is 2-W among the possible pathways, in which water dimer acts as an active catalyst and therefore facilitates the formation of a six-membered cyclic transition state. Lower barrier of 2-W is ascribed to an efficient bifunctional catalytic effect of water molecules. PM3-SM3.1 single point calculations have been done at the gas-phase optimized structure (SM3.1/PM3//PM3) to compare theoretical results to those of experimental work.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.433-438
• /
• 1997

(p-Methylbenzyl)-o-cyanopyridinium hexafluoroantimonate, a new catalyst, was synthesized by the reaction of o-cyanopyridine with α-bromo-p-xylene followed by exchange of counteranion with SbF6θ. We examined the effect of the catalyst on the bulk polymerization of tetrahydrofuran under various conditions. The catalytic activity was best in the presence of 1 : 1 of epichlorohydrin used as cocatalyst versus catalyst concentration. The resulting polymers had relatively low conversions in 1.0-40%. Their number average molecular weights were in the range of 800 to 5300. Propagation rate increased with increase in temperature according to an Arrhenius expression giving an activation energy of 62 KJ/mol. We also found catalyst proceeds via a cationic mechanism.