• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_3
• /
• pp.127-137
• /
• 2001

The sonochemical Process has been applied as a treatment method and was investigated its effect on the decomposition of humic substances(HS). The reaction kinetics and mechanisms in the Process of sonochemical treatment for humic substances(HS) in wastewater have also been discussed. It was observed that the metal ions such as Fe(II) and Mn(II) showed catalytic effects, while Al(III), Ca(II), and Mg(II) had inhibitory effects on the decomposition of humic substances in sonochemical reaction with hydrogen peroxide. Experimental results also showed factors such as hydrogen peroxide dose affected the formation of disinfection by-products. Two trihalomethanes, chloroform and dichlorobromomethane were formed as major disinfection by-products during chlorination. The mechanism of radical reaction is controlled by an oxidation process. The radicals are so reactive that most of them are consumed by HS radicals and hydroxyl radicals can be acted on organic solutes by hydroxyl addition, hydrogen abstraction, and electron transfer. The depolymerization and the radical reaction of HS radicals appear to occur simultaneously. The final steps of the reaction are the conversion of organic acids to carbon dioxide.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2434-2440
• /
• 2008

The effect of sodium (Na) promotion was studied in the biphenol (BP) hydrogenation using various Pd/C catalysts. Different amounts of sodium metal were used for promotion with Pd/C and their effects on BP hydrogenation were observed. The promotion order was changed to compare the effect of the position of the promoter in relation to the palladium (Pd) metal on the catalytic activity and yield of the final product, bicyclohexyl-4,4'-diol (BHD). Pd/C catalysts prepared from different methods were also sodium-promoted and the changes of the reaction pathway according to the type of promoted Pd/C catalyst were compared.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.33-37
• /
• 1967

The influence of impurities contained in Marmatite ores on leaching of zinc was investigated. The zinc sulfide having the same crystal structure of natural Sphalerite was prepared by heating the zinc sulfide chemically precipitated, at $650^{\circ}C$ in nitrogen atmosphere. The activation energy of the sample was 25.8 kcal per mole in the leach test when oxygen partial pressure was 5 atm. and the value was exceedingly high compared to that obtained in Marmatite ores. Synthetic zinc sulfides added with small amount of each impurities were treated in same procedure. As a result, it was found that the leaching velocity was accelerated sharply when about 1 percent of $Cu^{++}$ was blended to the sample. Larger amount of iron has also same effect but the effect was minor compared to the copper. The other impurities indicated no appreciable catalytic action.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.56-62
• /
• 2005

The catalytic effect of molybdovandophosphate heteropolyanion (HPAs) on the delignification of kraft bagasse pulp by hydrogen peroxide has been investigated. Very small amounts of the catalyst (0.05 0.3 mM/l) gave convenient results. Partial reduction of the catalyst was also studied. The effect of reaction medium (water, ethyl alcohol and acetone) on the bleaching was also studied. The results obtained show that the optimum condition for bleaching in presence of polyoxometalate were 0.05 mM/l catalyst concentration at $70^{\circ}C$ reaction temperature and $7\%$ consistency at pH 2 in aqueous medium. The ratio of water to solvent of 60:40 from acetone gives higher brightness than ethyl alcohol. The catalyst solution can be reused for 5 times without any reduction in brightness. ESR for the blank and exhausted solutions under different conditions was also carried out to find the relation between reduced metals and pulp brightness.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.37-41
• /
• 1992

The reactions of nitrous acid with hydrogen peroxide in acidic aqueous solution in the presence of several added anions have been studied at $0^{\circ}C$ and pH 2-4 to investigate the nucleophilic catalysis of these anions. From the dependence of reaction rates on the anion concentrations, significant catalytic effects were found for $Cl^-,\;Br^-,\;SCN^-$, in order of effect $SCN^-\;{\approx}\;Br^->Cl^-$, while no observable effect was found for ${ClO_4}^-$ and ${NO_3}^-$. These results support O-nitrosation reaction is the rate-determining step and NOX formed in the presence of an anion ($X^-$) also acts as a nitrosating agent and accelerates the overall reaction rate. The order of reactivity was found to be NOCl>NOBr>NOSCN, which is consistent with the results of N-nitrosation and S-nitrosation reactions.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.14-17
• /
• 1983

The effects of trialkylborane on the stereochemistry of ketone reduction with lithium borohydride were studied for the four representative ketones, namely 4-t-butylcyclohexanone, 2-methylcyclohexanone, norcamphor, and camphor. The presence of trialkylborane increased the yields of the less stable alcohols. For example, in the presence of tri-s-butylborane, 42 % yield of cis-4-t-butylcyclohexanol was observed whereas only 8 % yield with lithium borohydride alone in the reduction of 4-t-butylcyclohexanone. The in situ formation of lithium trialkylborohydride, by the hydride transfer from lithium trialkoxyborohydride to trialkylborane, was demonstrated as a possible mechanism for the catalytic effect of trialkylborane.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.840-845
• /
• 1996

Rate constants have been measured spectrophotometrically for the reactions of p-and m-nitrophenyl 2-thiophenecarboxylate (5a and 5b, respectively) with alkali metal ethoxides (EtO-M+) in absolute ethanol at 25.0±0.1 ℃. The reactivity of EtO-M+ exhibits dependence on the size of alkali metal ions, i.e. the reactivity of EtO-M+ toward 5a decreases in the order EtO-K+ ≥ EtO-Na+ > EtO-Li+ > EtO-, while the one toward 5b does in the order EtO-Na+ ≥ EtO-K+ > EtO-Li+ > EtO-. This result indicates that ion paired EtO-M+ is more reactive than dissociated EtO-, and alkali metal ions form complexes with the substrate more strongly at the transition state than at the ground state. The catalytic effect shown by alkali metal ions appears to be less significant in the reaction of 5 than in the corresponding reaction of 4, indicating that complexation of alkali metal ions with 5 is not as strong as the one with 4.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.25-31
• /
• 2013

Hydrogen peroxide takes much of the cost for Fenton reaction applied for treatment of organic contaminants. Therefore, the effective use of hydrogen peroxide makes the technology more cost effective. The effective use of hydrogen peroxide is especially needed in the soil and groundwater remediation where complete mixing is not possible and it takes a long time for reactive species to transport to the fixed target compounds. Stabilization ability for hydrogen peroxide of malonic acid was evaluated in Fenton and Fenton-like reactions in this study. Malonic acid contributes on the stabilization of hydrogen peroxide by weak interaction between iron and the stabilizer and inhibiting the catalytic role of iron. The stabilization effect increased as the solution pH decrease below the $pK_{a1}$. The stabilization effect increased as the concentration of malonic acid increased and the effect was maximized at the malonic acid concentration of about ten times higher than the iron concentration. The model organic contaminant was successfully oxidized in the presence of the stabilizer but the degradation rate was slower than the system without the stabilizer. The stabilization effect was also proved in a Fenton-like reaction where magnetite and hematite were used instead of soluble iron species.

• Carbon letters
• /
• v.26
• /
• pp.88-94
• /
• 2018

This manuscript explains the effective determination of urea by redox cyclic voltammetric analysis, for which a modified polypyrrole-graphene oxide (PPY-GO, GO 20% w/w of PPY) nanocomposite electrode was developed. Cyclic voltammetry measurements revealed an effective electron transfer in 0.1 M KOH electrolytic solution in the potential window range of 0 to 0.6 V. This PPY-GO modified electrode exhibited a moderate electrocatalytic effect towards urea oxidation, thereby allowing its determination in an electrolytic solution. The linear dependence of the current vs. urea concentration was reached using square-wave voltammetry in the concentration range of urea between 0.5 to $3.0{\mu}M$ with a relatively low limit of detection of $0.27{\mu}M$. The scanning electron microscopy was used to characterize the morphologies and properties of the nanocomposite layer, along with Fourier transform infrared spectroscopy. The results indicated that the nanocomposite film modified electrode exhibited a synergistic effect, including high conductivity, a fast electron-transfer rate, and an inherent catalytic ability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.116-124
• /
• 2011

In this work, the effect of the initial concentration of methanol and ethanol, and the addition of oxygen molecules were discussed to improve the hydrogen generation using non-thermal plasma reactor effectively. In addition, the effect of ozone decomposition catalyst of manganese dioxide and its quantity was investigated. First, hydrogen concentration increased until an initial concentration of about 40,000[ppm] of methanol and thereafter it was saturated. Henceforth, hydrogen concentration decreased with increasing the oxygen percent on the carrier gas of nitrogen about both substances. Related with the effect of catalyst, it increased upto 60[g], but it was not changed largely after that. Consequently, it is confirmed that the hybrid process using plasma process and catalytic surface chemical reaction is a very promising way to increase the efficiency of hydrogen generation as investigated in this work.