• Journal of the Korean Society of Combustion
• /
• v.19 no.4
• /
• pp.49-55
• /
• 2014

Design criterion for the size of micro Pt-catalytic combustor is investigated in terms of heat release rate. One-dimensional plug flow model is applied to determine the surface reaction constants using the experimental data at stoichiometric butane-air mixture. With these reaction constants, the mass fraction of butane and heat release rate predicted by the plug flow model are in good agreement with the experimental data at the combustor exit. The relationship between the size of micro catalytic combustor and mixture flowrate is introduced in the form of product of two terms-the effect of fuel conversion efficiency, and the effect of chemical reaction rate and mass transfer rate.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.37-44
• /
• 2007

A nickel foam, one of metal foams was seleced as a catalyst support instead of conventional ceramic materials. $Al_2O_3$ was coated on the surface of nickel foam to increase the surface area. $Al_2O_3$ coating process was based on sol-gel process. SEM image was obtained and $Al_2O_3$ coverage was confirmed. Combustion experiments were carried out using SUS combustor and $H_2$/air mixture. Temperatures were measured with different equivalence ratios and $H_2$ flow rates. $H_2$ conversion rates were calculated by the analysis of product gas using gas chromatography. Catalytic combustion of $H_2$ was complete and stable with Pt/$Al_2O_3$ coated nickel foam and influences of water vapor were confirmed during the beginning of combustion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.93-96
• /
• 2007

Catalytic activities of color and conductive carbon blacks in ethane decomposition for $CO_2-free$ hydrogen production were investigated. The ethane decomposition was carried out in a conventional fixed bed reactor under atmospheric pressure at 973-1173 K for 2 hours. When the decomposition in the presence of carbon black was compared with the non-catalytic thermal decomposition, the former exhibited significantly higher ethane conversion, higher C(s) selectivity and lower ethylene selectivity with small increase of the methane selectivity, which resulted in higher hydrogen yield. This indicates that carbon black is catalytically effective for dehydrogenation of ethane as well as subsequent decomposition of ethylene. All the carbon blacks exhibited stable catalytic activity with time. In durability tests, fluffy N-330 and BP2000 maintained their activities for 36 hours.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.516-521
• /
• 2004

In this paper, the effects of ethanol blended gasoline on emissions and their catalytic conversion efficiencies characteristics were investigated in gasoline engine with an electronic fuel injection. The results showed that the increase of ethanol concentration in the blended fuels brought the reduction of THC and $CO_2$ emissions from the gasoline engine. THC emissions were drastically reduced up to thirty percent. And brake specific fuel consumption was increased. but brake specific energy consumption was similar level. However. unburned ethanol and acetaldehyde emissions increased. The conversion efficiency of Pt/Rh based three-way catalysts and the effect of ethanol on CO and NOx emissions were investigated by the change of engine speed. load and air/fuel ratio. Furthermore, the ethanol blended fuel results in the reduction effect of THC. CO and NOx emissions at idle speed.

• Carbon letters
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2000

Catalytic reduction and oxidation of NO over polyacrylonitrile based activated carbon fibers (PAN-ACF) under various conditions were carried out to develop removal process of NO from the flue gas. The effect of temperature, oxygen concentration and the moisture content for the reduction of NO with ammonia as a reducing agent was investigated. The reduction of NO increased with the oxygen concentration, but decreased with the increased temperature. The moisture content in the flue gas affects the reduction of NO as the inhibition of the adsorption of the other components and the reaction on the surface of ACE For the oxidation of NO to $NO_2$ over PAN-ACF without using a reducing gas, it showed the temperature and the oxygen concentration of the flue gas are the important factors for the NO conversion in which the conversion increased with oxygen concentration and decreased with the temperature increase and might be the alternative option for the selective catalytic reduction process.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.E
• /
• pp.1-8
• /
• 1999

Catalytic performance for NOx removal by Ga-incorporated silicates(Ga-silicate; Gallosilicate) with MFI type synthesized by the rapid crystallization method was reported in this study. NOx removal was investigated under the condition of O2 excess(10%), with various hydrocarbons of low concentrations. Effect of H2O(2%) addition was also considered. The result showd that the conversion from NOx to N2 was enhanced on the Ga-silicate compared with the Al-silicate. Furthermore, the performance for NOx conversion on the Ga-silicate increased with addition of water.

• Clean Technology
• /
• v.22 no.3
• /
• pp.161-167
• /
• 2016

Catalytic combustion of benzene over various metal cation-exchanged zeolites has been investigated. Y(4.8)-type zeolite showed the highest activity among the used zeolites and Cu/Y(4.8) catalyst also showed the highest activity among metal cation/ Y(4.8) zeolites. The catalytic activity increased according to the amount of adsorbed oxygen acquired from O₂ TPD results. The catalytic activity also increased with an increase of Cu cation concentration on Cu/Y(4.8) catalysts. The conversion of benzene on the combustion reaction depended on not benzene concentration but the oxygen concentration. In addition, the introduction of water into reactants decreased the catalytic activity.

• Journal of Hydrogen and New Energy
• /
• v.20 no.5
• /
• pp.397-403
• /
• 2009

The catalysis of carbon black was investigated for the production of hydrogen by the catalytic decomposition of propane-butane mixture gas in this study. The thermal and the catalytic decompositions of hydrocarbons were performed at the temperature range of 500 - $1100^{\circ}C$, respectively. The conversions of hydrocarbons and the mole traction of hydrogen increased with increasing the reaction temperature and the conversion of hydrocarbons in the catalytic decomposition process was approximately liked with that obtained by the thermal decomposition. However, the mole traction of hydrogen produced in the catalytic decomposition process was higher than that obtained from the thermal decomposition. Therefore, it was concluded that the catalysis for the decomposition of hydrocarbons is occurred over carbon black used as catalyst. The mole traction of hydrogen produced by the catalytic decomposition of hydrocarbons also increased with increasing the mole ratio of $C_3H_8/C_4H_{10}$ in propane and butane mixture gas at $700^{\circ}C$. Therefore, it was concluded that the catalytic decomposition of the high propane mixture gas is more effectively for the production of hydrogen.

• Journal of the Korean Society of Visualization
• /
• v.10 no.2
• /
• pp.20-24
• /
• 2012

Increasing the active catalyst surface area is important in improving a converter's efficiency. In addition, uniform flow is advantageous in that it produces more efficient catalytic conversion. This results in the ability to use a smaller catalytic converter with uniform flow as opposed to a larger converter requirement for non-uniform flow. Therefore, it is important to characterize the internal flow of the catalytic converter. To characterize the system's flow patterns, velocity measurements were taken at the mid and exit planes of a ceramic honeycomb catalytic converter at flow rates of 37.8 l/s and 94.4 l/s. Measurements were conducted using LDV. The profiles were measured along both the major and minor axis of the planes. Primary flow direction velocities measured along the minor axis, at both flow rates, varied greatly at the mid plane and somewhat at the exit plane. The areas of greatest air flow were seen near the edges of the walls and on the side of the converter opposite the flow's entrance region. It also appears that the high velocities opposite the intake are due to the design of the entrance region. The entrance region is possibly too small to properly redirect the vertically entering fluid into an evenly distributed flow in the primary flow direction.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.803-807
• /
• 2002

The conversion of dimethyl ether(DME) has been carried out over $\gamma-alumina$, silica-alumina, and modified $\gamma-aluminal$ catalysts. Especially, the water effect has been investigated on purpose to develop a suitable catalyst for one-step synthesis of DME from $CO_2$ hydrgenation, The $\gamma-Al_2O_3$ modified with 1 wt% silica is more active and less deactivated by water than unmodified one. $CO_2has$ no effect on catalytic dehydration of methanol to DME.