• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2008

Human has faced in lack of fossil fuel and environmental crisis because of high population growth and development of industry. Hydrogen, unlimited amount and clean resource from water electrolysis, is remarkably known as the solution of recent energy crisis. One of the special characteristics of hydrogen is that a little amount of catalytic such as platinum and palladium makes nonflammable combustion, in other words catalyst combustion. Catalytic combustion fueled by hydrogen is environmentally friendly. This paper considers some comparisons of characteristic of catalytic combustion between a single layer of platinum catalyst, double layer of platinum and nickel catalysts and mixture of platinum and nickel catalysts. Some experiments of temperature distribution at different positions and characteristic of combustion in low temperature region were done in order to find an applicable possibility as a house-cooking burner.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.7
• /
• pp.8-13
• /
• 2009

Plasma enhanced chemical vapor deposition (PECVD) is commonly used for Carbon nanotubes (CNTs) fabrication, and the process can easily be applied to industrial production lines. In this works, we developed novel magnetized radio frequency PECVD system for one line process of CNTs fabrication for charge storable electrode application. The system incorporates aspects of physical and chemical vapor deposition using capacitive coupled RF plasma and magnetic confinement coils. Using this magnetized RF-PECVD system, we firstly deposited Fe layer (about 200[nm]) on Si substrate by sputter method at the temperature of 300[$^{\circ}$] and hence prepared CNTs on the Fe catalyst layer and investigated fundamental properties by scanning electron microscopy (SEM) and Raman spectroscopy (RS). High-density, aligned CNTs can be grown on Fe/Si substrates at the temperature of 600[$^{\circ}$] or less.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.585-591
• /
• 2011

This study has focused on the development of high performance membrane-electrode assemblies (MEAs) fabricated by decal method for proton exchange membrane fuel cell (PEMFC). To study the effect of ionomer contents on performance, we fabricated MEAs with several electrodes which were prepared by varying the quantity of ionomer from 20 wt.% to 45 wt.% in catalyst layer. The MEA performance was obtained through single cell test. The MEA prepared from electrode with 25wt.% of ionomer showed the best performance. We evaluated the surface area and pore volume of electrode with BET. We found that the surface area and pore volume in electrode decreased rapidly at the electrode with 40wt.% of ionomer in catalyst layer. MEA was fabricated by roll laminator machine and the roll laminating conditions for the preparation of MEA, such as laminating press, temperature and speed, were optimized. The MEA performance is not affected by laminating temperature and speed, but roll laminating press have a great effect on MEA performance.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1117-1121
• /
• 2020

In this work, it was confirmed that a SnO2 catalyst deposited by an atomic layer deposition(ALD) process can be employed in AlGaN/GaN heterostructure FET to detect NO2 gas. The fabricated HFET sensors on AlGaN/GaN-on-Si platform demonstrated that the devices with or without n-situ SiN have sensitivity of 5.5 % and 38 % at 200 ℃, respectively with response to 100 ppm-NO2.

• Transactions on Semiconductor Engineering
• /
• v.1 no.1
• /
• pp.9-13
• /
• 2023

An AlGaN/GaN heterojunction-based hydrogen sensor with SnO₂ nanoparticles/Pd catalyst layer was fabricated for room-temperature hydrogen detection. The fabricated sensor exhibited unstable drift in standby current when it was operated at room temperature. The instability in the sensing signal was dramatically improved when the sensor was operated under UV illumination.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.68-71
• /
• 2003

The performance of the Direct Methanol Fuel Cell (DMFC) using multi-layer electrode, which prepared by various anode catalysts and Nafion membranes, was studied for reducing the amount of the metal catalyst loaded in the MEA system. The amount of the catalyst used in this experiment was $3-4 mg/cm^2$ in cathode and $1-2 mg/cm^2$ in anode, respectively. The best performance was to be $230 mS/cm^2$ of MEA3 at $90^{\circ}C$ and 2 bar in this experiment. However, the overall performance of the DMFC was maintained almost the same compared to the general commercial catalyst systems.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.18-22
• /
• 2003

Single cell performance has been investigated and characterized with variables in the fabrication of DMFC anode. The performance was checked as a function of ionomer content which affects ion conductivity in the catalyst layer, and catalyst slurry solvent which determines structure of agglomerates consisting of an ionomer and a catalyst. Anode with total ionomer to catalyst ratio of 0.6 showed the best performance and the lowest polarization resistance. Also, electrochemically effective surface area increased with ionomer content. As solubility of the ionomer decreases with decreasing solvent polarity, the size of agglomerates consisting of a catalyst and an ionomer became larger in the less polar solvent. The anode using DPK $(\varepsilon=12.60)$ as a solvent, which is less polar than generally-used water or alcohol species, showed the maximum performance and the lowest polarization resistance.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.340-344
• /
• 2007

Catalytic upgrading of pyrolytic bio-oil produced from Japanes Larch was carried out over MCM-41 catalyst. Oil with enhanced stability was produced by the MCM-41 catalyst due to transform oxygen known as a main cause for the instability of bio-oil into $H_2O$, CO and $CO_2$. In addition, the MCM-41 catalyst produced the larger amount of phenolic compounds in the pyrolytic bio-oil product compared with that in the bio-oil produced without catalyst. Especially, the catalytic activity of Al-MCM-41 for the bio-oil upgrading was higher than that of Si-MCM-41 because Al-MCM-41 has the larger amount of acid sites. Also, the better reforming result was obtained when pyrolytic bio-oil vapor passed through catalytic layer rather than Japanese Larch was mixed with catalyst directly.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.523-530
• /
• 2019

For the low-Pt electrodes for polymer electrolyte fuel cells (PEMFCs), the optimization of ionomer content for anode catalyst layers was carried out. A commercial catalyst of 20 wt.% Pt/C was used instead of 50 wt.% Pt/C which is commonly used for PEMFCs. The ionomer content varies from 0.6 to 1.2 based on ionomer to carbon ratio (I/C) and the catalyst layer is formed over the electrolyte by the ultrasonic spray process. Evaluation of the prepared MEA in the unit cell showed that the optimal ionomer content of the air electrode was 0.8 on the I/C basis, while the hydrogen electrode was optimal at the relatively high ionomer content of 1.0. In addition, a large difference in cell performance was observed when the ionomer content of the hydrogen electrode was changed. Increasing the ionomer content from 0.6 to 1.0 by I/C in a hydrogen electrode with 0.05 mg/㎠ platinum loading resulted in more than double cell performance improvements on a 0.6 V. Through the analysis of various electrochemical properties in the single cell, it was assumed that the change in ionomer content of the hydrogen electrode affects the water flow between the hydrogen and air electrodes bounded by the membrane in the cell, which affects the overall performance of the cell. A more specific study will be carried out to understand the water flow mechanism in the future, and this study will show that the optimization process of hydrogen electrode can also be a very important cell design variable for the low-Pt and high-performance MEA.