• Macromolecular Research
• /
• v.12 no.6
• /
• pp.581-585
• /
• 2004

A copolymer P[OSA-MI] was synthesized by copolymerization of its corresponding monomers, N-phenyl maleimide (MI) and 2-octen-l-ylsuccinic anhydride (OSA). The polymer (poly[2-[1-(2,5-dioxo-l-phenylpyrroli­din-3-ylmethyl)heptyl]-succinic acid 4-(2-$\{$ethyl-[4-(4-nitrophen-ylazo)phenyl]amino$\}$ethyl)ester]) P[DR1MA-MI] was obtained from the reaction of P[OSA-MI] with 2-[4-(4-nitrophenylazo)-N-ethylphenylamino] ethanol (DR1). A stable monolayer of P[DRIMA-MI] was formed by spreading the solution of the polymer in chloroform. In Y-type Langmuir-Blodgett (LB) films prepared using this Langmuir-Blodgett method, the second harmonic waves generated from adjacent mono layers canceled each other out. In X-and Z-type LB films, the second harmonic intensity increased upon increasing the number of monolayers, but this increase was somewhat smaller than predicted by the square law. This phenomenon is due to defects or imperfect alignment of the dipoles in the LB film. The generation of second harmonic waves from Y-type LB films having an even number of mono layers supports this argument. The degree of imperfection seemed to increase as the number of layers increased. The second-order nonlinear optical properties of spin-cast films of these polymers were also measured. The largest second harmonic coefficient of the poled P[DRIMA-MI] film coated on a glass plate was 19 pm/V.

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.171-176
• /
• 2009

The chloride threshold level (CTL) in mixed concrete containing, ordinary Portland cement (OPC), pulverized fuel ash (PFA) ground granulated blast furnace slag (GGBS), and silica fume (SF) is important for study on corrosion of reinforced concrete structures. The CTL is defined as a critical content of chloride at the steel depth of the steel which causes the breakdown of the passive film. The criterion of the CTL represented by total chloride content has been used due to convenience and practicality. In order to demonstrate a relationship between the CTL by total chloride content and the CTL by free chloride content, corrosion test and chloride binding capacity test were carried out. In corrosion test, Mortar specimens were cast using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.0, 0.2, 0.4, 0.8, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binder. All specimens were cured 28 days, and then the corrosion rate was measured by the Tafel's extrapolation method. In chloride binding capacity, paste specimens were casting using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.1, 0.2, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binders. At 28days, solution mixed with the powder of ground specimens was used to measure binding capacity. All specimens of both experiments were wrapped in polythene film to avoid leaching out of chloride and hydroxyl ions. As a result, the CTL by total chloride content ranged from 0.36-1.44% by weight of binders and the CTL by free chloride content ranged from 0.14-0.96%. Accordingly, the difference was ranging, from 0.22 to 0.48% by weight of binder. The order of difference for binder is OPC > 10% SF > 30% PFA > 60% GGBS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.672-686
• /
• 1999

The purpose of this study was to compare the casting problem and corrosion behavior in two types of HL Hexed abutments of the Steri-Oss system ; gold/plastic coping and gold coping. The anodic Polarization behavior, the galvanic corrosion between abutments and Type III gold alloys, before and after casting were analyzed, and the crevice corrosion of casting samples was analyzed with the CPPT test and the SEM. The results are as follows : 1. Anodic polarization behavior of samples ; Before casting, gold/plastic coping and gold coping was shown to have a similar corrosion pat-terns. Type III casting gold alloy was shown to have a lower corrosion potential and passivation film. Corrosion potential of the case of gold/plastic coping after casting was higher than that of gold coping, but the region of passivation film for gold/plastic coping was smaller than that of gold coping. 2. Galvanic corrosion behavior of samples ; Contact current density between casting gold alloys and gold/plastic before casting was higher than that between gold coping and casting gold alloy Galvanic corrosion of samples after casting was shown to have similar contact current density 3. Crevice corrosion behavior of samples ; Crevice corrosion resistance of casting sample using gold coping was lower than that of cast-ing sample using gold/plastic coping, and a severe corrosion pattern was observed at the abutment-casting gold alloy interface by the SEM.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.258-264
• /
• 1996

Polyanilines were prepared by the oxidative polymerization in the presence of ammonium persulfate as an oxidant. After dehydration, a doping was carried out by mixing the polymer solution with dopants and immersing into aqueous dopant solutions. Using various riopants, the d-spacing of polyanilines can be controlled from $3.72{\AA}$ to $4.844{\AA}$. The d-spacing of polyanilines with polymeric or bulky dopants was larger than that of as-cast polyaniline. The characterization of the physical properties were confirmed by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), dielectric analyzer (DEA) etc. Annealed polyaniline membrane exhibited the oxygen permeability of 0.072 barrer and the oxygen selectivity to nitrogen was 6.87. For the gas separation of polyanilines with polymeric or bulky riopants, the permeability increased while the selectivity detereased. Permeability can be readily controlled by the use of bulky dopants.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.121-125
• /
• 2002

Cherry tomato was packed with several plastic films, and investigated the quality characteristics such as gas composition, weight loss, microbial load, soluble solid content, total acidity during storage at 12$\^{C}$. Cast polypropylene(CPP), low density polyethylene(LDPE), polyolefin(MPD, PD961) and perforated polyolefin(PY85) were used as packaging film. Oxygen and carbon dioxide concentration inside packages generally showed a stabilized levels after 10 days, but those of CPP and PD961 changed throughout the storage. Weight loss of PY85 was 25.6 % after 20 days, while others maintained around 1.0%. Total microbial count showed a increase pattern similar to yeast and mold, and CPP maintained the highest microbial load after 10 days. MPD retarded the decay of cherry tomato to 5.3%, while others showed above 20% after 20 days.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.320-324
• /
• 2015

Optimization of the fabrication process of NiO-yttrium doped barium zirconate (BZY) composite anode substrates using tape-casting for high performance thin-film protonic ceramic fuel cells (PCFCs) is investigated. The anode substrate is composed of a tens of microns-thick anode functional layer laminated over a porous anode substrate. The macro-pore structure of the anode support is induced by micron-scale polymethyl methacrylate (PMMA) pore formers. Thermal gravity analysis (TGA) and a dilatometer are used to determine the polymeric additive burn-out and sintering temperatures. Crystallinity and microstructure of the tape-cast NiO-BZY anode are analyzed after the sintering.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.580-586
• /
• 2008

Copolyimides were synthesized from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 1,3-bis(3-aminophenoxy)benzene (BAPB) with different mole ratios of 2,2-bis[4-(4-aminophenoxy)pheny1]hexafluoropropane (BAPP). The solution cast film of poly(amic acid) (PAA) was heat treated at different temperatures to create copolyimide films. The PI copolymer films were found to exhibit good optical transparencies. The thermomechanical properties, morphology, and optical transparency of PI films were examined using fourier transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction (XRD), scanning electron microscopes (SEM), differential scanning calorimeter(DSC), thermo-gravimetric analyzer (TGA), universal tensile machine (UTM), and IN - Vis. spectrometer. The glass transition temperature ($T_g$), ultimate strength, and initial modulus linearly increased with increasing BAPP mole fraction. However, thermal stability($T_D{^i}$) of the copolyimide remains constant regardless of BAPP loadings. It was found, however, that the optical transparency decreases slightly upon increasing the BAPP content because of the formation of the charge transfer complexes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.113-118
• /
• 2011

This study was aimed to develop blend films by rice by-product (rice-hull and rice-bran) and bio-degradable materials. The rice by-product was firstly prepared from the pulverizing for making fine powder. Bio-degradable materials could be prepared by melting at high temperature. The mixture of the fine powder of rice by-product and melted bio-degradable materials was then blended and cast into films. The obtained films were investigated on their morphology, secondary structures and properties by using SEM, ICP and ASTM, respectively. Mechanical properties and degradability of these films were measured and compared to those of the PE films. Mechanical strength of bio-films was higher than that of PE films, however elongation ratio showed lower percent than that of PE film. In addition, bio-film could be degraded into fragments within 3 months under the field condition of normal upland crop cultivation. Bio-degradable mulching film indicated great potential for agronomic use as a new source of bio-degradable material.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.411-416
• /
• 2016

Benzothienobenzothiophene ($C_8-BTBT$) is a soluble organic small molecule material with high crystallinity resulting from its strong self-organizing properties. In addition, the high mobility and easy fabrication of $C_8-BTBT$ make it very attractive in terms of organic thin-film transistors. In this work, we made $C_8-BTBT$ thin films by using the zone-casting method; we also used an organic solvent to treat the devices with solvent vapor annealing to improve the electrical properties. As a result, we confirmed improved mobility, threshold voltage, and subthreshold swing after solvent vapor annealing. To prove the effect of solvent vapor annealing, we used the simultaneous extraction model to extract the contact resistance from the current-voltage curve. We confirmed that the electrical properties improved with decreasing contact resistance.

• Journal of computational fluids engineering
• /
• v.7 no.3
• /
• pp.9-16
• /
• 2002

Most of modem aerospace gas turbines must be operated at a gas temperature which is several hundreds of degrees higher than the melting temperatures of the materials used in their construction. Complicated cooling schemes need to be employed in the combustor walls and in the high pressure turbine stages. Internal passages are cast or machined into the hot sections of aero-gas turbine engines and air from the compressor is used for cooling. In many cases, the cooling system is engineered to utilize jets of high velocity air, which impinge on the internal surfaces of the components. They are categorized as 'Impinging Cooling Method' and 'Vortex Cooling Method'. Specially, research of new cooling system(Vortex Cooling Method) that overcomes inefficiency of film cooling and limitation of space. The focus of new cooling system that improves greatly cooling efficiency using less amount of cooling air on surface heat transfer elevation. Therefore, in this study, a numerical analysis has been peformed for characteristics of flow and heat transfer in the swirl chamber and compared with the flow measurements by LDV. Especially, for understanding high heat transfer efficiency in the vicinity of wall, we considered flow structure, vortex mechanism and heat transfer characteristics with variation of the Reynolds number.