• Preventive Nutrition and Food Science
• /
• 제6권2호
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.

• 폴리머
• /
• 제25권2호
• /
• pp.151-160
• /
• 2001

결정성 약제가 함침된 생분해성 고분자학이 고분자(poly(d,1-lactide)), 약제(progesterone) 및 용매(dimethylformamide)로 이루어진 고분자용액을 고형화시켜 제조되었다. 용매에 약제 및 고분자를 용해시켜 준비된 제막용액을 유리판 위에 도포한 후, 이로부터 용매를 증발시켜 고형화시키거나, 또는 고분자 및 함침 약제 모두에 비용매로 작용하는 물과 용액 필름에 존재하는 용매를 교환시켜 용액 필름이 응고되도록 하였다. 제조된 고분자막들은 용액 필름의 응고화 경로에 따라 뚜렷하게 다른 형상을 보여주었다. 진공 상태에서 용매의 증발을 통해 응고화되었을 때, 함침 약제인 프로제스테론은 구의 형상을 보여주며 고형화된 고분자 구조에 둘러싸여 막의 내부에 균일하게 분포되었다. 이에 비해, 비용매인 물에 침지시켜 용매와 비용매의 급속한 확산에 의해 응고화시키거나, 대기에 방치시켜 대기에 존재하는 수증기의 흡수에 의해 고분자 희박 지역의 핵 형성을 통한 용액 필름의 액체-액체 상분리를 유도하며 응고화시킨 경우, 함침된 약제는 고분자막 내부에 편상의 결정 구조를 지니며 막 내부에 불균일하게 분포되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.229-230
• /
• 2019

Integrated water-soluble film is dissolved in the rubber asphalt waterproof sheet to secure adhesive strength on freshly cast concrete on the adhesion side of waterproofing layer on the floor slab. In addition, in order to determine whether the water in the concrete slurry can dissolve the water-soluble film sufficiently, the adhesive strength of the waterproofing sheet was compared between difference wetness condition at the upper part of the concrete specimen before the concrete casting.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.399-406
• /
• 1999

Polytetramethylene ether glycol (PTMG)와 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate(TDI), isophoron diisocyanate(IPDI)로 polyurethane (PU) prepolymer를 합성하고, dimethylol propionic acid(DMPA)로 쇄연장시킨 후 triethyl amine(TEA)으로 중화시켜서 안정한 수분산성의 음이온성 폴리우레탄을 제조하였다. 음이온성 폴리우레탄의 합성과정에서 쇄연장제의 함량과 중화비에 따른 에멀젼의 유화안정성, 접착강도, 점도, 유리전이온도 및 cast film의 물리적 성질을 UTM, Viscometer와 DSC를 사용하여 검토하였다.

• Elastomers and Composites
• /
• 제33권3호
• /
• pp.177-184
• /
• 1998

Polytetramethylene ether glycol(PTMG)와 4,4'-diphenylmethane diisocyanate(MDI), tol-uene 2,4-diisocyanate (TDI), isophoron diisocyanate(IPDI)로 polyurethane(PU) prepolymer를 합성, n-methyl-diethanol amine(n-MDEA)로 쇄연장시킨 후 glycolic acid(GA)로 quaternization시켜서 안정한 수분산성의 양이온성 폴리우레탄을 제조하였다. 양이온성 폴리우레탄의 합성과정에서 쇄연장제의 함량과 quaternization에 따른 에멀젼의 유화안정성, 접착강도, 점도, 유리전이온도 및 cast film의 물리적 성질을 UTM, Viscometer와 DSC를 사용하여 검토하였다.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1298-1305
• /
• 2000

0.1, 0.5, 1.0, 2.0% epichlorohydrin으로 가교결합시킨 감자 전분을 각각 5% 첨가한 polyethylene cast 필름을 제조하여 이들의 기계적 성질 및 열분해 특성, 생분해 특성을 분석하였다. Instron으로 측정한 필름의 기계적 성질에서는 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 인장강도, 신장율, 인장에너지 모두가 더 높게 나타나 필름의 기계적 강도가 향상되었음을 알 수 있었다. FT-IR과 Instron으로 측정한 필름의 열분해 특성에서는 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 빠르게 열분해됨이 확인되었다. 또한 필름의 생분해 특성에서도 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 생분해 정도가 더 뛰어난 것으로 나타났다.

• 식품저장과 가공산업
• /
• 제3권1호
• /
• pp.42-46
• /
• 2004

Quality of fresh-cut tomato slices was compared during cold storage under various modified atmosphere packaging conditions. Chilling injury of slices in containers sealed with Film A was higher than with Film B; these films had oxygen transmission rates of 87.4 and 60.0 ml h-1 m-2 nun-1 at $5^{\circ}C$ and $99\%$ RH, respectively. While slices in containers with an initial atmospheric composition of air, $4\%$ CO2 + 1 or $20\%\;O_2, \;8\%\;CO_2+1$ or $20\%\;O_2$, or $12\%\; CO_2+\;20\%\;O_2$ showed fungal growth, slices in containers with $12\%\;CO_2 +\;1\%\;O_2$ did not. Low ethylene in containers enhanced chilling injury. Modified atmosphere packaging provided good quality tomato slices with a shelf-life of 2 weeks or more at $5^{\circ}C$. Experiments were conducted to compare changes in quality of slices of red tomato (Lycopersicon esculentum Mill. 'Sunbeam') fruit from plants grown using black polyethylene or hairy vetch mulches under various foliar disease management systems including: no fungicide applications (NF), a disease forecasting model (Tom-Cast), and weekly fungicide applications (WF), during storage at $5^{\circ}C$ under a modified atmosphere. Slices were analyzed for firmness, soluble solids content (SCC), titratable acidity (TA), pH, electrolyte leakage, fungi, yeasts, and chilling injury. With both NF and Tom-Cast fungicide treatments, slices from tomato fruit grown with hairy vetch (Vicia villosa Roth) mulch were firmer than those from tomato fruit grown with black polyethylene mulch after 12 days storage. Ethylene Production of slices from fruit grown using hairy vetch mulch under Tom-Cast was about 1.5- and 5-fold higher than that of slices from WF and NF fungicide treatments after 12 days, respectively. The percentage of water-soaked areas (chilling injury) for slices from tomato fruit grown.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.156-161
• /
• 2021

Cr-Si based alloys are not only excellent in corrosion resistance at high temperatures, but also have good wear resistance due to the formation of Cr3Si phase, therefore they are promising as metallic coating materials. Aluminum is often added to Cr-Si alloys to improve the oxidation resistance through which stable alumina surface film is formed. On the other hand, due to the addition of aluminum, various Al-containing phases may be formed and may negatively affect the heat resistance of the Cr-Si-Al alloys, so detailed investigation is required. In this study, two Cr-Si-Al alloys (high-Si & high-Al) were prepared in the form of cast ingots through a vacuum arc melting process and the microstructural changes after high temperature heating process were investigated. In the case of the cast high-Si alloy, a considerable amount of Cr3Si phase was formed, and its hardness was significantly higher than that of the cast high-Al alloy. Also, Al-rich phases (with the high Al/Cr ratio) were not found much compared to the high-Al alloy. Meanwhile, it was observed that the amount of the Al-rich phases reduced by the annealing heat treatment for both alloys. In the case of the high temperature heating at 1,400 ℃, no significant microstructural change was observed in the high Si alloy, but a little more coarse and segregated AlCr phases were found in the high Al alloy compared to the cast state.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.910-916
• /
• 2009

Present work was focused on the influence of methylcellulose (MC) on steady rheology of wheat gliadin solution and the properties of glycerol plasticized gliadin films. The presence of MC below 0.99 wt% improved viscosity and flow activation energy of the 10 wt% gliadin solution significantly. In the casting films containing 0.2 g glycerol/g dry protein, the MC component aggregated in the gliadin matrix. The blend films containing less than 7.7 wt% MC exhibited higher Young's modulus (E) and tensile strength (${\sigma}_b$) and lower elongation at break (${\epsilon}_b$) in comparison with the pure gliadin film, which was related to the intermolecular interaction between MC and gliadins, the brittle fracture of the aggregated MC component, and the increase in glass transition temperature ($T_g$) of the gliadin phase. Increasing MC content led to a slight increase in water vapor permeability (WVP) without significant influence on the moisture absorption (MA).

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.271-271
• /
• 2006

The present article describes a novel method of preparing the sulfonated polysulfone-based PEMs for DMFC, which are excellent in film quality, proton conductivity, methanol impermeability and mechanical properties. No depression in film quality or difficulty in film preparation is observed, even though sulfonated group of the PEMs are kept as high as 70 mol %. Allyl-terminated cooligo-PESs containing the organic sulfonate groups were solvent-cast into films and then thermally treated for cross-linking. Cross-linked sulfonated polysulfone-based PEMs gave unprecedented reduction of methanol cross-over and high ionic conductivity through in-situ thermal polymerization and cross-linking of telechelic sulfonated sulfone oligomers during a membrane preparation.