• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.623-634
• /
• 2022

Due to river maintenance projects such as the creation of hydrophilic areas around rivers and the Four Rivers Project, the flow characteristics of rivers are continuously changing, and the risk of water quality accidents due to the inflow of various pollutants is increasing. In the event of a water quality accident, it is necessary to minimize the effect on the downstream side by predicting the concentration and arrival time of pollutants in consideration of the flow characteristics of the river. In order to track the behavior of these pollutants, it is necessary to calculate the diffusion coefficient and dispersion coefficient for each section of the river. Among them, the dispersion coefficient is used to analyze the diffusion range of soluble pollutants. Existing experimental research cases for tracking the behavior of pollutants require a lot of manpower and cost, and it is difficult to obtain spatially high-resolution data due to limited equipment operation. Recently, research on tracking contaminants using RGB drones has been conducted, but RGB images also have a limitation in that spectral information is limitedly collected. In this study, to supplement the limitations of existing studies, a hyperspectral sensor was mounted on a remote sensing platform using a drone to collect temporally and spatially higher-resolution data than conventional contact measurement. Using the collected spatio-temporal hyperspectral images, the tracer concentration was calculated and the transverse dispersion coefficient was derived. It is expected that by overcoming the limitations of the drone platform through future research and upgrading the dispersion coefficient calculation technology, it will be possible to detect various pollutants leaking into the water system, and to detect changes in various water quality items and river factors.

• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.15-28
• /
• 2023

In the Republic of Korea, the target project scope of the small-scale EIA is stipulated as the plan area above around 5,000~60,000m² depending on a type of project and classification of land use. Whereas, the lower limit of the corresponding local government EIA project is generally located above the small-scale EIA's limits, and overlapping ranges exist. This situation has been enlarged since road construction and district unit planning were included as the target projects for small-scale EIA in the "Enforcement Decree of the Environmental Impact Assessment Act", which was partially revised in November 2016, and the current consultation system needed discussion in that small-scale EIA is allowed to be done without gathering review opinions at the local level. In fact, projects subjected to local government EIA but consulted as small-scale EIAs may seem insignificant because of a small number of total cases; however, it is worth paying attention to the fact that a local government may not add a target project due to the small-scale EIA. This study suggested the three policy measures for improving small-scale EIA to enhance the effectiveness of local government EIA: supplementing the institutional arrangements to incorporate the review opinion from the local region in small-scale EIA, giving priority to local EIA for conducing the projects in overlapping ranges with partial amendments on EIA law regarding exceptions to local government EIA, including small target projects (not to be small-scale EIA targets) to the ordinance that are deemed necessary to be conducted as local government EIA. Even though a positive function of small-scale EIA has been confirmed, efforts should be made to improve the situation in which many projects within local governments are consulted without review from the region.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.143-174
• /
• 2023

With the development of deep learning technologies, Artificial Intelligence powered Optical Character Recognition (AI-OCR) has evolved to read multiple languages from various forms of images accurately. For the financial industry, where a large number of diverse documents are processed through manpower, the potential for using AI-OCR is great. In this study, we present a configuration and a design of an AI-OCR modality for use in the financial industry and discuss the platform construction with application cases. Since the use of financial domain data is prohibited under the Personal Information Protection Act, we developed a deep learning-based data generation approach and used it to train the AI-OCR models. The AI-OCR models are trained for image preprocessing, text recognition, and language processing and are configured as a microservice architected platform to process a broad variety of documents. We have demonstrated the AI-OCR platform by applying it to financial domain tasks of document sorting, document verification, and typing assistance The demonstrations confirm the increasing work efficiency and conveniences.

• Journal of Life Science
• /
• v.33 no.1
• /
• pp.56-63
• /
• 2023

In this study, two cases of food poisoning caused by Salmonella that occurred in Gyeongsangnam-do in September 2021 are reported. One of the outbreaks occurred in a school and the other in a company. The molecular epidemiological characteristics of the isolated strains in the two outbreaks were analyzed. In the case of the school outbreak, 29 (4.9%) of 588 individuals experienced diarrhea and abdominal pain. As a result of a test of 36 individuals (patients, n=29; cook workers, n=7), Salmonella enterica serotype Enteritidis was detected in 17 (47.2%) patients, suggesting this serotype was the principal cause. Meanwhile, Salmonella spp. were not detected in 35 food and environmental samples. In the company outbreak, 87 (3.0%) of 2,900 individuals who had intaked from the same source experienced diarrhea, abdominal pain, and fever. In a test of 50 individuals (patients, n=40; cook workers, n=10), S. Enteritidis was detected in 28 patients (56.0%). Also, Vibrio cholerae (NAG) was detected in four patients with S. Enteritidis, and V. cholerae (NAG) only was detected in one patient. Salmonella spp. were not detected in 118 preserved foods, but S. Enteritidis was detected in one eaten food (toast) delivered in group by the company. Through PFGE genetic homology analysis of the isolated strains, all S. Enteritidis detected in patients and consumed foods were the same type. It seems that these S. Enteritidis isolates were the same type as detected in a previous school outbreak and in patients of group food poisoning in other regions, leading to an enhanced problem of food poisoning and epidemiology. Our analytic results can provide data for epidemiological management and food poisoning prevention based on molecular characteristics.

• Journal of the Daesoon Academy of Sciences
• /
• v.27
• /
• pp.245-282
• /
• 2016

Currently, the whole world is being swept away by spiritual movements seeking divinity in oneself. Yet there are terror attacks, religious disputes and other conflicts continuously taking place on larger and larger scales as well as expanding further and further throughout the world. Interreligious harmony seems like a distant ideal. What is the ultimate cause of religious conflicts? Is interreligious communication truly that difficult? Even among different cultures, said cultures' varieties of ritual expressions, and various religious doctrines, there are points of general common to be appreciated if a deep perspective is adopted. When we find the common ground and understand each other's difference, it will be easier to communicate since everyone will be learning from each other. What could serve as common ground for different religions? Many scholars speak about the state of 'oneness' that is claimed by mysticism throughout a large array of religions. This state of oneness is typically not achieved overnight, but it serves as a prospective state which is pluralistically inclusive. This "religion of enlightenment" emphasizes the process of reaching comprehensive interreligious agreement would be characterized by a deep religious perspective. If superficial religious perspectives focuses only on faith to attain blessings and engage in blind belief, then, by contrast, deep religious perspectives emphasize inner divinity, the true self, orthe higher self. The words, 'superficial religious perspective' and 'deep religious perspective' were defined for personal convenience by O Gang-nam, a scholar of comparative religion. Consequently, this classification is a relative binary concept lacking hard and fast rules with regards to distinctions. But the concept of superficial religious perspectives and deep religious perspectives has its advantage in allowing clearer and easier discussion about religions because it could embrace all aspects of religious life and the development of various religious sentiment. In this way, the terms surface religious perspectives and deep religious perspectives will be used in limited framework. I both borrow this concept and reconsider it by referring to other scholars' methods of classification. From that point, I explore and these views in relation to religious experience. How does religiosity develop, maturity of religious faith take place, deep awareness of truth reveal itself, or an attitude of open-mindedness arise? After these states are realized, is interreligious agreement possible? Most religious studies scholars point out 'religious experience.' They say people could develop their faith from superficial religious beliefs into a more mature and deeper faith through religious experience while continuously aspiring towards enlightenment and practicing their religion in daily life. This study will try to examine aspects of superficial religious perspectives and deep religious perspectives represented in each religion and also explore criticism of each religion. With this view of superficial religious perspectives and deep religious perspectives, some cases documenting the religious experience of Daesoonjinrihoe disciples will be analyzed to see how their religiosity develops from superficial religious perspectives into deep religious perspectives through certain religious experiences. The characteristics of those experiences will also be investigated.

• Clean Technology
• /
• v.16 no.3
• /
• pp.198-205
• /
• 2010

Two sets of thermal reaction experiment for chlorinated hydrocarbons were performed using an isothermal tubular-flow reactor in order to investigate thermal decomposition, including product distribution of chlorinated hydrocarbons. The effects of $H_2$ or Ar as the reaction atmosphere on the thermal decomposition and product distribution for dichloromethane($CH_2Cl_2$) was examined. The experimental results showed that higher conversion of $CH_2Cl_2$ was obtained under $H_2$ atmosphere than under Ar atmosphere. This phenomenon indicates that reactive-gas $H_2$ reaction atmosphere was found to accelerate $CH_2Cl_2$ decomposition. The $H_2$ plays a key role in acceleration of $CH_2Cl_2$ decomposition and formation of dechlorinated light hydrocarbons, while reducing PAH and soot formation through hydrodechlorination process. It was also observed that $CH_3Cl,\;CH_4,\;C_2H_6,\;C_2H_4$ and HCl in $CH_2Cl_2/H_2$ reaction system were the major products with some minor products including chloroethylenes. The $CH_2Cl_2$/Ar reaction system gives poor carbon material balance above reaction temperature of $750^{\circ}C$. Chloroethylenes and soot were found to be the major products and small amounts of $CH_3Cl$ and $C_2H_2$ were formed above $750^{\circ}C$ in $CH_2Cl_2$/Ar. The thermal decomposition reactions of chloroform($CHCl_3$) with argon reaction atmosphere in the absence or the presence of $CH_4$ were carried out using the same tubular flow reactor. The slower $CH_3Cl$ decay occurred when $CH_4$ was added to $CH_3Cl$/Ar reaction system. This is because :$CCl_2$ diradicals that had been produced from $CHCl_3$ unimolecular dissociation reacted with $CH_4$. It appears that the added $CH_4$ worked as the :$CCl_2$ scavenger in the $CHCl_3$ decomposition process. The product distributions for $CHCl_3$ pyrolysis under argon bath gas were distinctly different for the two cases: one with $CH_4$ and the other without $CH_4$. The important pyrolytic reaction pathways to describe the important features of reagent decay and intermediate product distributions, based upon thermochemistry and kinetic principles, were proposed in this study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.32-39
• /
• 1981

In order to study the genetic system of the blast resistant varieties, the conidial suspension of mutant races of T-2$^{+t}$, N-2$^{+t}$, C-8$^{+t}$ was inoculated at 4-5 leaf stage by injector for F_2 seedlings from the crosses between seven resistant varieties and four maker lines easily detectable at seedling stage. The results are summarized as follows; 1. The fertility of cross between Semi-dwaf testers and Indica resistant varieties except Carreon was about 74 percents. 2. The segregation modes of resistance varied with varieties and blast races. However, the resistance was expressed as dominance in all cases. Tetep, Tadukan and Carreon showed more complicated segregation for resistance than that of the bred lines. 3. For blast races used, four segregation ratios such as 3:1, 9:7, 13:3 and 37:27 were found in the Tatukan, Tetep, and IR747, and three segregation ratios such as 3:1, 13:3 and 15:1 in the Carreon, and two segregation ratios of 3:1 and 13:3 with Suweon 287, Suweon 288, and Iri342. 4. In the segregation of the resistance to the each races, the ratios of 3:1, 13:3, 15:1 were fitted to T-2$^{+t}$, and the ratios of 3:1, 13:3, 9:7 and 37:27 to N-2$^{+t}$ and C-8$^{+t}$. 5. Suweon 287, Suweon 288 and Iri342 carried one simple dominant gene and inhibitor gene was considered in some cross combinations. Meanwhile Tadukan, Tetep and IR747 seemed to carry one to three resistant genes, and in some cross combinations, the expression of these genes were simple dominant, inhibiting, duplicating and complimentary action. 6. Resistance genes to blast races, T-2$^{+t}$, N-2$^{+t}$ and C-8$^{+t}$ in the Tadukan, Tetep, Carreon, Suweon 287, Suweon 288 and Iri342 were found to be independent with the linkage group of II(lg), VIII(la), XI(bc), and XII(gl).bc), and XII(gl).

• Journal of Korea Water Resources Association
• /
• v.56 no.4
• /
• pp.235-243
• /
• 2023

Due to the revision of the River Act and the enactment of the Act on the Investigation, Planning, and Management of Water Resources, a regular bed change survey has become mandatory and a system is being prepared such that local governments can manage water resources in a planned manner. Since the topography of a bed cannot be measured directly, it is indirectly measured via contact-type depth measurements such as level survey or using an echo sounder, which features a low spatial resolution and does not allow continuous surveying owing to constraints in data acquisition. Therefore, a depth measurement method using remote sensing-LiDAR or hyperspectral imaging-has recently been developed, which allows a wider area survey than the contact-type method as it acquires hyperspectral images from a lightweight hyperspectral sensor mounted on a frequently operating drone and by applying the optimal bandwidth ratio search algorithm to estimate the depth. In the existing hyperspectral remote sensing technique, specific physical quantities are analyzed after matching the hyperspectral image acquired by the drone's path to the image of a surface unit. Previous studies focus primarily on the application of this technology to measure the bathymetry of sandy rivers, whereas bed materials are rarely evaluated. In this study, the existing hyperspectral image-based water depth estimation technique is applied to rivers with vegetation, whereas spatio-temporal hyperspectral imaging and cross-sectional hyperspectral imaging are performed for two cases in the same area before and after vegetation is removed. The result shows that the water depth estimation in the absence of vegetation is more accurate, and in the presence of vegetation, the water depth is estimated by recognizing the height of vegetation as the bottom. In addition, highly accurate water depth estimation is achieved not only in conventional cross-sectional hyperspectral imaging, but also in spatio-temporal hyperspectral imaging. As such, the possibility of monitoring bed fluctuations (water depth fluctuation) using spatio-temporal hyperspectral imaging is confirmed.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.59-66
• /
• 2019

Purpose: Several radiologic reference lines have been used to evaluate individuals with a clubfoot but there is no consensus as to which is most reliable. The aim of this study was to identify which radiologic parameters have relevance to the predictability of additional surgery after Ponseti casting on clubfoot and the effect of clubfoot treatments that contain Ponseti casting and additional surgery. Materials and Methods: A total of 102 clubfeet (65 patients, 37 bilateral) were reviewed from 2005 to 2013. The patients were divided into two groups (Group A, those for whom the result of the Ponseti method was successful and did not require additional surgery; and Group B, those for whom the result of the Ponseti method was unsuccessful and required additional surgery), and the following parameters were measured on the plain radiographs: i) talo-calcaneal angle on the anteroposterior and lateral view, ii) talo-1st metatarsal angle on the anteroposterior view, and iii) Tibio-calcaneal angle on the lateral view with the ankle full-dorsiflexion state. Each radiograph was reviewed on two separate occasions by one orthopedic doctor to characterize the intra-observer reliability, and the averages were analyzed. Next, 20 cases were chosen using a random number table, and two orthopedic doctors measured the angle separately to characterize the interobserver reliability. Results: Groups A and B included 73 clubfeet (71.6%) and 29 clubfeet (28.4%), respectively. The initial talo-calcaneal angle and tibiocalcaneal angle in the lateral view were significantly different among the groups. In addition, inter- and intra-observer biases were not detected. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view were significantly different after treatment in both groups. Conclusion: Congenital clubfeet treated with the Ponseti method showed successful results in more than 70% of patients. The initial talocalcaneal angle and tibio-calcaneal angle on the lateral view were the radiologic parameters that could predict the need for additional surgical treatments. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view could effectively evaluate the changes in clubfoot after treatment.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.