• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.1
• /
• pp.31-45
• /
• 2023

Objectives The aim of this study is to find the future perspective through analyzing the trends of acupuncture treatment for gouty arthritis (GA) by searching the China National Knowledge Infrastructure (CNKI) and PubMed. Methods We searched clinical studies about acupuncture treatment for GA through the searching the electronic database of CNKI and PubMed. We analyzed the characteristics of selected studies according to research design, sample size, publication year, treatment methods, evaluation criteria and adverse events. Results Twenty-nine studies published from January 1, 2015 to July 1, 2022 were selected. They consisted of 25 randomized controlled trials, 3 non-randomized controlled trials, and 1 case reports. In these studies, several types of acupuncture treatments were performed and the most treatment was conventional acupuncture treatment with fine needles. The most commonly used evaluation outcome was effective rate. Conclusions Through this result, the Chinese literature positively reported the effect of acupuncture on GA. However, high-quality evaluation by rigorous research using well-designed and more objective outcomes is required.

• The Journal of Pediatrics of Korean Medicine
• /
• v.30 no.1
• /
• pp.22-31
• /
• 2016

Objectives The purpose of this study is to investigate recent clinical studies on the effect of acupuncture for urticaria worldwide. Methods Based on the PubMed search with the key search terms of 'urticaria, acupuncture', dated between 2002 to 2015, a total of 9 randomized controlled trials (RCTs), 3 case series, and 2 case reports have been found, and were analyzed. Results and conclusions 1. The most commonly used acupoints were Quchi (LI 11), Xuehai (SP 10), Zusanli (ST 36), Sanyinjiao (SP 6), Dazhui (GV 14). 2. The most commonly used meridians were The Ren Channel, The Du Channel and The Gall Bladder Meridian of Foot-Shaoyang. 3. The treatment period varied from 12 days to 3 months. 4. Acupuncture treatment found to be significantly more or equally effective than the western medicine. 5. More clinical studies are needed to prove a true effectiveness of the acupuncture for urticaria. In case of laboratory tests, serum immunoglobulin E (IgE), interleukin 4 (IL-4) and Helicobacter pylori negative rate might be helpful.

• Transactions of Materials Processing
• /
• v.22 no.6
• /
• pp.323-327
• /
• 2013

In this paper, the flow lines as a function of product design as well as the forging process design are explored using typical application examples. The prediction of flow lines using metal forming simulation technology is introduced along with their characterization. Experimental studies have shown that the metal flow lines have a strong influence on the structural rigidity of the final product. In this study we present several typical applications. One example is the case of severely cut metal flow lines during machining, especially in the region where periodic contacting forces are applied. Another example is the case of abnormal distortion of flow lines which can cause too much elongation or hot shortness due to viscous heating in the region of distortion. A third example is the case of a macrosegregation region which needs to be controlled so it is not adjacent to the region where the force is applied in the use of the final component. An example of weight reduction for an automobile component with improved flow lines is also introduced. These typical applications can provide process engineers with the insight in designing automobile or mechanical components as well as in designing the manufacturing methods to produce various parts.

• Clinical Psychopharmacology and Neuroscience
• /
• v.16 no.4
• /
• pp.481-488
• /
• 2018

Preliminary studies have claimed that short term fasting would negatively affect school performance and cognition. In contrast some other studies have reported not important decline in cognition and executive function as a result of fasting. Also limited attention was generally devoted to dietetic regimens, nutritional status and body weight. Yet neuroscience and neuro-cognitive aspects of acute hunger on the electroencephalogram and differences between obese and non-obese cases is not well understood. Hence, we decided to design and perform a case study in a more controlled situation similar to reality. Therefore, we performed several examinations including subjective tests (for eating status) and objective tests (cognitive tests such as Stroop effect and Sternberg search and electroencephalogram measures such as steady-state visual evoked potential and auditory steady-state responses) for an obese and a non-obese academic case before and after a simple breakfast. The results showed that the breakfast effects on the neuro-cognitive functions depend on either obesity status, nutritional status of the case or the type of cognitive task (visual or auditory). This paper would open a new insight to answer some important questions about the neuro-cognitive implications of fasting and feeding in obese and non-obese human cases.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.687-696
• /
• 2007

To increase the reliability of auto-ignition in CAI engines, the thermodynamic properties of intake flow is often controlled using recycled exhaust gases, called internal EGR. Because of the internal EGR influence on the overall thermodynamic properties and mixing quality of the gases that affect the subsequent combustion behavior, optimizing the intake and exhaust valve timing for the EGR is important to achieve the reliable auto-ignition and high thermal efficiency. In the present study, fully 3D numerical simulations were carried out to predict the mixing characteristics and flow field inside the cylinder as a function of valve timing. The 3D unsteady Eulerian-Lagrangian two-phase model was used to account for the interaction between the intake air and remaining internal EGR during the under-lap operation while varying three major parameters: the intake valve(IV) and exhaust valve(EV) timings and intake valve lift(IVL). Computational results showed that the largest EVC retardation, as in A6, yielded the optimal mixing of both EGR and fuel. The IV timing had little effect on the mixing quality. However, the IV timing variation caused backflow from the cylinder to the intake port. With respect to reduction of heat loss due to backflow, the case in B6 was considered to present the optimal operating condition. With the variation of the intake valve lift, the A1 case yielded the minimum amount of backflow. The best mixing was delivered when the lift height was at a minimum of 2 mm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.415-429
• /
• 2011

In this study, a single-phase quasi Z-source AC-AC converters with a series connection of the output terminals is proposed. The proposed system has configuration that the input terminals of two quasi Z-source AC-AC converters are connected in parallel and its output terminals are connected in series. The out of phase mode and in phase mode of the proposed system are presented. To verify the validity of the proposed converter, a DSP controlled hardware was made and PSIM simulation was executed. As a result, controlling the duty ratio of the converter, the desired buck-boost output voltages could be generated. For each modes, as compared with the single converter operation, the proposed converter could enhance the efficiency and input power factor according to different loads. Also, in case of the out of phase mode under the constant load, the efficiency and input power factor of the proposed system are increased 10[%], 35[%] respectively in compared with the single converter. And, the output voltage is constantly controlled in dynamic state in case while the load is suddenly changed.

• Korean Journal of Acupuncture
• /
• v.38 no.4
• /
• pp.222-234
• /
• 2021

Objectives : The purpose of this study is to examine the efficacy of fire needling and warm needling for De Quervain Syndrome by reviewing clinical studies for recent 10 years. Methods : Randomized controlled trials, non-randomized controlled trials, and case series containing more than 20 cases about fire needling and warm needling for De Quervain Syndrome published since 2011 were searched through four foreign online databases (CNKI, Pubmed, EMBASE, Cochrane Library) and five Korean online databases (OASIS, Science ON, DBPIA, KISS, RISS). The number and characteristics of participants, treatment points and main treatment methods involving other combination treatments, treatment cycle or total periods of treatments, evaluation indices, efficacy, and adverse events were analyzed. Risk of bias of included randomized clinical trials was assessed using a revised tool for assessing risk of bias in randomized trials (RoB 2). Results : A total of 6 randomized clinical trials and 2 case series involving 471 participants were included. Tender point or 'Ashi point' was the most commonly used treatment point, followed by LU4. Treatment frequency ranged from once a day to once a week. One to three outcome measures were used to evaluate the results of the studies, with the efficacy rate the most frequently used, followed by visual analogue scale. Overall risk of bias of all included randomized clinical trials was judged to have some concerns. Conclusions : All selected studies showed that fire needling and warm needling treatments for De Quervain syndrome were more effective than other clinical methods or acupuncture treatments. However, as the number of clinical studies is still too small and the risk of bias of the studies is not low, it is believed that more systematic and objective studies should be conducted.

• The Research Journal of the Costume Culture
• /
• v.6 no.1
• /
• pp.121-135
• /
• 1998

This study discusses the concept on environment-friendly textile products, environmentally oriented processes of fiber and fabric production, and case reports of environments-friendly products. This study may inspire recognition and necessity of environment-friendly textile products to textile industry and designers ,and also develop the consideration of environmental aspects in the field of textile design and fashion design. Environment-friendly textile products mean not only natural products but also the products reduced the environmentally harmful consequences of their production processes. Because the textile production processes may cause environmental problem. the processes of bleaching, dyeing, mercerising, proofing, and establishing must be carefully controlled. These environment-friendly textile products in this study are divided into development of environment-friendly textile products, recycled textile products, products which are produced by environmentally oriented processes, and recycling capacity in the process of the coming into use. If the textile industrialists and its designers are continuously interested in those environment-friendly products, the textile industrialists produce environment-friendly products in manufacturing process, and the textile and the fashion designers design their products having the conciousness of environment. They reduce environmental pollution caused by producing textile products and are survived in the struggle of existence of the future world trade market.

• Journal of Haehwa Medicine
• /
• v.22 no.2
• /
• pp.37-45
• /
• 2014

Recently, interest in detoxification therapies is increasing. Coffee enema has been most frequently used as one of detoxification therapies. However, there is lack of scientific basis for coffee enema, regarding its clinical efficacy and safety respectively. This study aimed to produce the general features of coffee enema such as definition, protocols, clinical applications and efficacies, and side effects. Total 37 articles coffee enema were collected from 7 databases including PubMed, and reviewed thoroughly. The majority of papers were review studies or case reports for effects/side-effects of coffee enema. The quality of papers was generally poor, and no randomized controlled clinical trial (RCT) was exist. This study shows the current status of coffee enema-related study, and suggests the demand for RCT study to develop the evidence-based detoxification therapy using coffee enema.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.27-40
• /
• 2003

In the present study, a newly modified soil nailing technology named as the PSN(Pretension Soil Nailing) system is proposed. Effects of various factors related to the design of the pretension soil nailing system, such as the length of a sheathing pipe and the fixed cone, are examined throughout a series of the displacement-controlled field pull-out tests. 9 displacement-controlled field pull-out tests are performed in the present study and the pretension forces are also evaluated based on the measurements. In addition, both short-term and long-term characteristics of pull-out deformations of the newly proposed PSN system are analyzed and compared with those of the general soil nailing system by carrying out the stress-controlled field pull-out tests. A numerical approach is further made to determine a postulated failure surface as well as a minimum safety factors of the proposed PSN system using the shear strength reduction technique and the $FLAC^{2D}$ program. Global minimum safety factors and local safety factors at various excavation stages computed in case of the PSN system are analyzed throughout comparisons with the results expected in case of the general soil nailing system. An efficiency of the PSN system is also dealt with by analyzing the wall-facing deformations and the adjacent ground surface settlements.