• Journal of Intelligence and Information Systems
• /
• 제8권1호
• /
• pp.159-173
• /
• 2002

The goal of this research is to develop of an intelligent injection mold process planning system using Case-Based Reasoning. Injection mold process planning is the planning of manufacturing process to produce an injection mold economically and efficiently. Automation of the process planning is required because the problems of handmade scheduling, the difficulty of training experts for process planning, the lack of domain experts, the spread of CAD/CAM system and flexible manufacturing. This research uses Case-Based Reasoning because the injection mold process planning is devised variously and complicatedly, but the process planning of similar injection molds is very similar to each other. The system that is developed by this research uses cases that are collected in a case base when planning the process of new injection mold. New injection mold process planning is devised by retrieving a case that was made from the most similar injection mold. This research presented and composed the cases of injection mold process planning, and devised a method of search and adaptation, and developed an intelligent injection mold process planning system with the experimental results.

• Journal of Intelligence and Information Systems
• /
• 제9권2호
• /
• pp.171-184
• /
• 2003

A project planning is one of the most important processes that determines success and failure of the project. A pre-project planning is also essential job for information system implementations at the early stage of project planning, especially for management information system like ERP. However, pre-project planning is very difficult, because lots of factors and their relationships should be considered. Pre-project planning of ERP implementation has been done by project manager's own knowledge and experiences. In this article, we propose a system that help project manager to make a pre-project plan of ERP project with case-based reasoning(CBR) framework. The proposed CBR system saves previous cases of ERP pre-project planning in the case base. Then, the system finds the most similar case with the current pre-project planning problem. Project manager can make a pre-project plan by adjusting the most similar case. From the interview with project managers, we collect some field cases of ERP implementation. We organized these cases by using XML(Extensible Markup Language), which is good for representing hierarchical information. XML gives us some flexibilities to correct and maintain cases. We make a prototype system, PPSS(Project Planning Support System) that help project manager to make a pre-project plan of ERP implementations. The object of the system is to support project manager to make a pre-project plan of ERP. We hope the result of the study can be applied to other information systems. Our research would be extended to cover other stages of project planning.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.171-177
• /
• 2003

A project planning is one of the most important processes that determines success and failure of the project. A pre-project planning is also essential job for information system implementations at the early stage of project planning, especially for management information system like ERP. However, pre-project planning is very difficult, because lots of factors and their relationships should be considered. Pre-project planning of ERP implementation has been done by project manager's own knowledge and experiences. In this article, we propose a system that help project manager to make a pre-project plan of ERP project with case-based reasoning(CBR) framework. The proposed CBR system saves previous cases of ERP pre-project planning in the case base. Then, the system finds the best similar case with the current pre-project planning problem. Project manager can make a pre-project plan by adjusting the most similar case. From the interview with project managers, we collect some field cases of ERP implementation. We organized these cases by using XML(Extensible Markup Language), which is good for representing hierarchical information. XML gives us some flexibilities to correct and maintain cases. We make a prototype system, PPSS(Project Planning Support System) that help project manager to make a pre-project plan of ERP implementations. The object of the system is to support project manager to make a pre-project plan of ERP. We hope the result of the study can be applied to other information systems. Our research should be extended to cover other stages of project planning.

• Journal of the Korean Society for Precision Engineering
• /
• 제23권9호
• /
• pp.119-126
• /
• 2006

This paper addresses the methodology development far the automated machining setup planning system using case-based reasoning(CBR). The case-based reasoning is used to develop a setup planning system. which consists of part input and representation module, case retrieval module, and case adaptation module. We present new approaches in the part input and representation module and the case retrieval module focusing on the similarity index determination. An illustrative example is included to demonstrate the proposed method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.709-712
• /
• 1996

Generating a project network of a specific construction project is very time consuming and difficult task in the field. To effectiviely automate and support the planning process, we design a case-based project planning expert system inspired by the fact a human expert project planner uses previous cases for planning a new project. A construction project case consist of its specific characteristics and the corresponding project network (i.e. project plan). Using frame based representation. we represent the project features affecting the progress network and the entities composing the project plan such as the buildings, construction methods, WBS (work breakdown structure), activities, and resources. The project planning process runs through most similar case retrieval, case adaptation, and user requirement satisfaction. We represent the construction domain knowledge for each procedure using constraints and rules. We develop the methodology for constraint-based case adaption. Case adaptation process mainly consist of activity generation/deletion and predecence constraint satisfaction, for which we develop the dynamic constraint generation method and connect user-level requirement representation the system-level network modification knowledge. The methodology is being applied to the prototype for apartment construction project planning.

• KIEAE Journal
• /
• 제12권2호
• /
• pp.83-92
• /
• 2012

Recently, many countries are tightening a variety of policies and controls with great efforts to reduce emission of GHGs(Greenhouse Gases) as concern for climate change heightens. The purpose of the study is to provide guidelines for planning and evaluate element and evaluate housing development. The elements are also assorted into 6 sections and 30 planning elements were drawn from them. It is drawn to 6 sections, 27 categories, 31 evaluation elements except cultural and perceptual aspects unrelated to planning elements from these elements. Case analysis has shown that most of planning elements were applied because these cases obtained environment-friendly certification in the country. Followings are the common characteristics. Firstly, it showed that application of planning element in all cases is excellent. Secondly, the case with excellent application of elements related with energy and application degree obtained excellent degree i environment-friendly certification in the country. Finally, application of planning elements related with renewable energy was in poor condition in all cases. With the utilization of SBTool, the evaluation results about planning elements of housing complex of Carbon emissions-reduction type showed that CASE-A obtained 11.17 points and CASE-B obtained 9.24 points. In the case of renewable energy section, it was confirmed that the evaluation doesn't work well. As a result, changes of planning elements affect environment-friendly extent. It was confirmed that accessibility to housing complex of Carbon emissions-reduction type could change. Estimated result of Amount of Carbon emission showed that annual energy consumption per each family of CASE-A is $4,269,964MJ/m^2$, as a result of which, Carbon emission is $234,815kg/m^2$. And annual energy consumption per family of CASE-B is $4,197,563MJ/m^2$, as a result of which, Carbon emission is $214,584kg/m^2$. Application of planning elements in the aspect of housing complex of Carbon emissions-reduction type shows that the level for Carbon emissions-reduction is high level. And study with assessment from the draft should be followed.

• KIEAE Journal
• /
• 제12권2호
• /
• pp.3-14
• /
• 2012

A sustainable evaluation and planning method shall have an integrative methodology for analysis of interrelationship among environmental resource uses and natural conditions during the planning process. However, there are few methods for understanding or achieving sustainable planning in residential development projects for most planner/architects. Therefore, the purpose of this research is to investigate theories of the concept of environmental carrying capacity based on the ecological view, to propose a sustainable planning method for evaluation and planning of environmental sustainability in residential development projects, to analyze interrelationship of selected environmental resources to represent an environmental carrying capacity for a residential development project based on the proposed sustainable planning method. Finally, through the case studies of a high-density housing project located near Seoul Metropolitan area, the existing case and a sustainable case were analysed by the proposed method.

• Journal of Intelligence and Information Systems
• /
• 제14권4호
• /
• pp.1-18
• /
• 2008

By using previous similar case plans, the case-based planning (CBP) systems can generate efficiently plans for new problems. However, most existing CBP systems show limited functionalities for case retrieval and case generalization. Moreover, they do not allow their users to participate in the process of plan generation. To support efficient memory use and case retrieval, the proposed case-based planning system, JCBP, groups the set of cases sharing the same goal in each domain into individual case bases and maintains indexes to these individual case bases. The system applies the heuristic knowledge automatically extracted from the problem model to the case adaptation phase. It provides a sort of case generalization through goal regression. Also JCBP can operate in an interactive mode to support a mixed-initiative planning. Since it considers and utilizes user's preference and knowledge for solving the given planning problems, it can generate solution plans satisfying more user's needs and reduce the complexity of plan generation.

• Journal of the Korean Society for Precision Engineering
• /
• 제21권7호
• /
• pp.163-170
• /
• 2004

In order to automatically determine the sequences of block assembly operations in shipbuilding, a process planning system using case-based reasoning (CBR) is developed. A block-assembly planning problem is modeled as a constraint satisfaction problem where the precedence relations between operations are considered constraints. The process planning system generates an assembly sequence by adapting information such as solutions and constraints collected from similar cases retrieved from the case base. In order to find similar cases, the process planning system first matches the parts of the problem and the parts of each case based on their roles in the assembly, and then it matches the relations related to the parts-pairs. The part involved in more operations are considered more important. The process planning system is applied to simple examples fur verification and comparison.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제21권46호
• /
• pp.181-196
• /
• 1998

The aim of this research is the development of a CAPP system which can use the old experience of process planning to generate a process plan for a new part and learn from its own experience using the concept of stratified case-based reasoning(CBR). A process plan is determined through the hierarchical process planning procedure that is based on the hierarchical feature structure of a part. Each part and case have their own multiple abstractions that are determined by the feature structure of the part. Retrieving the case in stratified case-based process planning is accomplished by retrieving the abstraction that is most similar to the input part abstraction in each abstraction level of the case-base. A new process plan is made by the adaptation that translates the old case's process plan into the process plan of a new part. Operations, machines and tools, setups and operation sequence in each setup are determined in the adaptation of abstraction using some algorithms and the reasoning based on knowledge-base. By saving a new part and its process plan as a case, the system can use this new case in the future to generate a process plan of a similar part. That is, the system can learn its own experience of process planning. A new case is stored by adding the new abstractions that are required to save as the new abstraction to the existing abstractions in the case-base.