• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.187-200
• /
• 1999

An extensive investigation is performed to analyze the behavior of tieback anchored wall. Finite element method is used and several case histories are collected to investigate the relationship of wall deflection, anchor unbonded length, and anchor load. The finite element method can calculate wall deflection with changing the anchor unbonded length and the anchor load. Wall deflection normalized by excavation height can be related to anchor location so that it may produce a zone chart. It is found that a different chart showing the relation of the wall deflection, the anchor load, and anchor unbonded length can be constructed. It is necessary to collect more case histories considering soil conditions and to perform FE analysis extensively with changing bonded length to extend the capability of this relation chart into practice.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.207-214
• /
• 1997

The objective of this study is to review the current stare of earthquake simulation techniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f.)and three d.o.f. aluminium shear models were used and 4m$\times$4m 6 d.o.f. shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in fourier transform amplitude. Free vibration and white noise tests have shown almost the same values for natural frequencies, but shown quite different values for damping ratios, that is, 1.37% in case of r\free vibration test vs 14.76% in case of white noise test. The time histories of story shear versus story drift show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.778-784
• /
• 1999

A method for obtaining the motion of an impact system whose primary and secondary system are composed of lumped masses, springs and dampers, and all the contacts are made through spring and damping elements is presented. The frequency response functions derived from the equations of motion and the impulse response functions obtained from the inverse Fourier transform of the derived frequency response functions are used for the calculation of the system responses. The procedure developed for the calculation of displacements and force time-histories was based on the convolution integrals of impulse response functions and forces applied to the systems. Time histories of displacements and contact forces are obtained for the case where a random excitation is applied to a point in the system. Impact statistics such as contact forces and the time between impacts calculated from those time histories is presented.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.40-45
• /
• 2003

Steel members have advantages of resisting torsion and axial compression. In design, residual stresses at the welded joint of T-shape steel pipes are one of the most important points to be considered. In this paper, characteristics of residual stresses of welded joints are clarified by carrying out 3D non-steady heat conduction analysis and 3D thermal elastic-plastic FE-analysis. According to the results, the production mechanism of residual stresses at the welded joint of T-shape steel pipe is clarified. In this paper, circumferential stresses depended on thermal histories but axial and radial stresses were more dependent on geometrical shape than thermal histories. Residual stresses in the axial direction on the lower part of pipe member were tensile, controlled by geometrical shape. However, in case of middle part, residual stresses in all the directions were controlled by thermal histories.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.25-34
• /
• 1976

Analytical solutions for the transient temperature and quasi-static thermal stresses which arise in thin plates subjected to an instantaneous point source of heat have been investigated. And the solutions have been extended to the case of a moving source of heat with the aid of the Duhamel's superposition integral. For finite disk an experiment was conducted, the measured temperature histories show a good agreement with the theoretical temperature histories, And the histories of thermal stresses show a good qualitative agreement with the physical phenomena. And also we can find out that the maximum temperature and thermal stresses and their location can be estimated by using the solutions for infinite plates instead of the solutions for a finite plate. The solutions can be used for the problems such as a welding or line heating in a hull construction.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.13-34
• /
• 1975

Analytical solutions for the transient temperature distribution and quasi-static thermal stresses which arise in a thin circular disk of finite radius subjected to an instantaneous point source acting in its interior have been obtained. And the solutions have been extended to the case of a moving heat source with the aid of the Duhamel's superposition integral. The solutions given are in the form of double infinite serieses, and their numerical results have been compared with the experimental temperature histories. It can be found out that the theoretical histories of thermal stresses show a good agreement with the experimental results and the theoretical histories of thermal stresses show a good qualitative agreement with a physical phenomena. The solutions can be applied to the problems such as a flame hardening of the cylindrical machine elements and a circular patch welding or a circular cutting of the structural member.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.383-395
• /
• 2007

As a state-of-the-art paper related to consolidation settlement, the 31th Terzaghi lecture was briefly described. Case histories that are compared between predicted and measured settlements in the Nakdong River deltaic plane were introduced to show the true picture of our technology. Structures and other features of clays in this country were needed to understand, which are closely related to sample disturbance and also consolidation properties. In order to improve the settlement-related technology, some problems that we have faced and their alternatives were considered.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.87-111
• /
• 2000

In this study, we describe the principle and result of geophysical techniques which are widely used in geotechnical survey. Also we discuss two case histories. One is discrimination of limestone cavity areas by resistivity, seismic tomography, televiewer, well logging, and the other is discrimination of coal by resistivity, electromagnetic method, resistivity tomography.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.147-179
• /
• 2002

The important role of observational method in geotechnical engineering are emphasized together with the direction of future development, concerning successful application of the technique on the site investigation, design and feed back at various construction stages. Case histories on the application of feed back are introduced in order to achieve the most economical and reliable construction for tunnel, rock slope and deep excavations through feed back system at design and construction stages. Also the limitations and advantages of the observational method and the role of feed back system are discussed for construction of tunnel, rock slope and deep excavation in hard ground such as layered ground conditions including weathered, soft and hard rocks.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.505-508
• /
• 2007

Usually, cut-slope is the term that call rock slope. Therefore, the cause of instability of cut-slope is influenced generally in lithological and structure geological qualities including weathering disintegration. Through the several case studies, we could confirm that stabilization countermeasure also should be based in geological properties.