• 생명과학회지
• /
• 제31권5호
• /
• pp.502-510
• /
• 2021

자가 나노유화 약물전달시스템(SNEDDS)은 오일, 계면활성제, 공계면활성제의 균질한 혼합물로서 가벼운 교반에 의해도 에멀전 형성이 가능하고 분산 시 200 nm 이하 범위의 입자 크기를 갖는 나노 에멀전을 형성하는 약물 수송체를 말한다. SNEDDS는 난용성이며 생체이용률이 낮은 소수성약물의 흡수율을 높일 수 있는 뛰어난 가용화 방법으로 알려져 있다. 본 연구에서는 난용성인 티카그렐러에 대한 용해도가 높은 유상으로 MCT oil과, 계면활성제로 Tween 80, 공계면활성제로 Labrafil M1944CS를 사용하여 SNEDDS를 개발하고, 분무건조기술을 이용하여 다양한 다공성의 캐리어에 흡착시켜 고형의 SNEDDS를 제조하였다. 제조된 고형의 SNEDDS에 대하여 물리화학적 특성 및 분말특성을 평가한 후 용출시험을 진행하였다. 본 연구를 통해 얻어진 다공성의 캐리어에 흡착시켜 만들어진 다양한 고형 SNEDDS에서 티카그렐러의 결정형은 무정형으로 변환된 것을 확인할 수 있었다. 또한 제조된 고형의 SNEDDS 조성물들은 모두 원료에 비하여 우수한 용출양상을 나타내는 것을 확인할 수 있었다. 특히 이산화규소를 통해 얻어진 고형의 SNEDDS 조성물의 입자크기와 다분산지수가 제일 작았으며 흐름성과 압축성도 제일 우수하였다. 따라서 이산화규소를 통해 얻어진 고형의 SNEDDS 조성물은 난용성인 티카그렐러의 경구 고형제제화 연구에 적합한 약물 전달 시스템인 것을 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제28권4호
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.480-481
• /
• 2006

The n-type $(95%Bi_2Te_3-5%Bi_2Se_3)$ compound was newly fabricated by gas atomization and hot extrusion, which is considered to be a mass production technique of this alloy. The effect of powder size on thermoelectric properties of 0.04% $SbI_3$ doped $95%Bi_2Te_3-5%Bi_2Se_3$ alloy were investigated. Seebeck coefficient $({\alpha})$ and Electrical resistivity $(\rho)$ increased with increasing powder size due to the decrease in carrier concentration by oxygen content. With increasing powder size, the compressive strength of $95%Bi_2Te_3-5%Bi_2Se_3$ alloy was increased due to the relative high density. The compound with ${\sim}300\;{\mu}m$ size shows the highest power factor among the four different powder sizes. The rapidly solidified and hot extruded compound using $200[\sim}300{\mu}m$ powder size shows the highest compressive strength.

• 한국재료학회지
• /
• 제16권10호
• /
• pp.633-638
• /
• 2006

Silica powders with spherical shape and narrow size distribution were prepared by large-scale ultrasonic spray pyrolysis applying the droplet classification apparatus. On the other hand, silica powders prepared by large-scale ultrasonic spray pyrolysis without droplet classification apparatus had broad size distribution. Droplet classification apparatus used in this paper applied the principles of cyclone and dispersion plate with small holes. The droplets formed from the ultrasonic spray generator applying the droplet classification apparatus had narrow size distribution. The droplets with fine and large sizes were eliminated by droplet classification apparatus. The optimum flow rate of the carrier gas and diameter of the hole of the dispersion plate were studied to reduce the size distribution of the silica powders prepared by large-scale ultrasonic spray pyrolysis. The size distribution of the silica powders prepared by large-scale ultrasonic spray pyrolysis at the optimum preparation conditions was 0.76.

• Asian-Australasian Journal of Animal Sciences
• /
• 제1권4호
• /
• pp.189-193
• /
• 1988

Distribution of tracer particles in carrier conform to Poisson distribution and the effect of Poisson distribution on mixing uniformity can be reduced by increasing the tracer particle number per unit weight. In this paper, above-mentioned theory has been demonstrated by using three kinds of rotor whose pitches are different.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1359-1363
• /
• 1998

The p-fluorobenzyl radical was generated from the p-fluorotoluene and vibronically excited in a corona excited supersonic expansion with inert buffer gases. The vibronic emission spectra of the jet cooled p-fluorobenzyl radical in the D1 → D0 transition have been observed in the visible region. The spectra exhibit several low frequency sequence bands in the vicinity of the every strong vibronic band. The characteristics of the sequence bands have been examined by varying the experimental conditions such as carrier gas and nozzle size to identify the origin of the transition in the spectra.

• 한국수정란이식학회지
• /
• 제22권4호
• /
• pp.257-263
• /
• 2007

This study was performed to investigate the relationship between PSS-HSP70 gene polymorphism and artificial insemination (AI) reproductivity in the pigs. The RFLP polymorphism of PSS and the SSCP polymorphisms of HSP70 K1, K3 and K4 PCR product were detected different patterns. In the experiment for AI of fresh semen, spring and fall season showed higher litter size born of 10.89 head than 10.47 head of summer season. Landrace was showed higher litter size of 9.96 head than that of Duroc and Yorkshire (p<0.05). Stress relating PSS and HSP70 polymorphism of PSS-Normal, HSP70 K1-BB, K3-AB, K4-AA showd a highest litter size born of 10.97 head and litter size born alive of 10.69 head than that of the other polymorphisms(p<0.05). In the experiment for AI of frozen semen, effects of season and pig breeds were not showed for litter size born. The stress relating polymorphism of PSS-Carrier, HSP70 K1-BB, K3-BB, K4-AB showed highest litter size born of 11.29 head and litter size born alive of 10.82 head and PSS-Normal, HSP70 K1-BB, K3-AB, K4-AA showed the lowest litter size born of 8.48 head and litter size born alive of 7.33 head than that of the other polymorphisms(p<0.05). These results suggest that AI litter size born for the stress of forzen thawed semen may be affected by PSS and HSP70 polymorphism in pigs.

• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.186-192
• /
• 2006

We applied a new charging system using the condensation and evaporation method to charge the submicron particles with a uniform charging performance. The monodispersed NaCl submicron particles were condensed by n-butanol vapor and grew up to micron droplets with a same size, regardless of their initial size. Those condensed droplets were charged in an indirect corona charger. The indirect corona charger consisted of the ion generation zone and the particle charging zone. In the ion generation zone, Ions were generated by corona discharge and some of them moved into the particle charging zone by a carrier gas and mixed with the condensed droplet. And finally, the charged and condensed droplets dried through an evaporator to shrink to their original size. The average charge and penetration rate of the particles before and after evaporation were measured by CPC and aerosol electrometer and compared with those of a conventional corona charger. The results showed that the average charge was $5\~7$ charges and the penetration rate was over $90\%$, regardless of the initial particle size.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.379-384
• /
• 2010

In the present work, bismuth nanopowders with various particle size distributions were synthesized by controlling argon (Ar) gas flow rate and chamber pressure of a gas condensation (GC) apparatus. From the analyses of transmission electron microscopy (TEM) images and nitrogen gas adsorption results, it was found that as Ar gas flow rate increased, the specific surface area of bismuth increased and the average particles size decreased. On the other hand, as the chamber pressure increased, the specific surface area of bismuth decreased and the average particles size increased. The optimum gas flow rate and chamber pressure for the maximized electrochemical active surface area were determined to be 8 L/min and 50 torr, respectively. The bismuth nanopowders synthesized at the above condition exhibit 13.47 $m^2g^{-1}$ of specific surface area and 45.6 nm of average particles diameter.

• International Journal of Computer Science & Network Security
• /
• 제23권10호
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.