• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.905-909
• /
• 1999

Reaction of tetrahomodioxa p-phenylcalix[4]arene with ethyl bromoacetate and potassium carbonate in ace-tone leads to the title tetra ester derivative, 7,13,21,27-tetra-phenyl-29,30,31,32 -tetrakis(ethoxycarbonyl)meth-oxy-2,3,16,17-tetrahomo-3,17-dioxacalix[4]arene, its structure was determined by NMR spectra as 1,4-alternate conformation. The molecular structure has been solved by X-ray diffraction methods. The molecule has a conformation with pseudo center of symmetry. The benzene ring A is up, ring C is down, B and D rings are flat with respect to the plane of the macrocyclic ring.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.612-618
• /
• 1997

$LiMn_2O_4$ powders were prepared by burning and subsequent calcination of PEG-metal nitrate precursor. After the burning stage of the precursor, some minor phases such as $Mn_2O_3$ (or $Mn_3O_4$), MnO, and carbonate were formed and single phases of $LiMn_2O_4$ were obtained by further calcinations above 400 ℃. From thermal analysis of the precursor, a violent thermal decomposition, which was indicated by a drastic weight loss accompanied by a sharp and strong exothermic peak, was observed and probably caused by an oxidation-reduction reaction between oxidizer and fuel. The formation of the minor phases could be explained in terms of the burning behavior of the precursor by employing valence concepts of propellant chemistry. The calcined powders were composed of submicron-sized but highly agglomerated particles and showed very broad particle size distribution.

• Cement Symposium
• /
• s.49
• /
• pp.21-22
• /
• 2022

The purpose of this study is to reduce carbon dioxide emissions in the cement industry and to collect carbon dioxide generated in industrial facilities such as cement factories and thermal power plants, store and utilize it, and convert high-value-added resources. While conventional Ordinary Portland Cement is characterized by hardening through hydration reactions, basic research is underway to develop cement that reacts with carbon dioxide and converts it into carbonate mineralization.

• Cement Symposium
• /
• s.49
• /
• pp.23-24
• /
• 2022

Wollastonite is a promising sustainable cement mineral which directly reacts with carbon dioxide to form calcium carbonate and silica gel. Due to the carbon dioxide reaction, it can be undoubtly one of materials for carbon capture, utilization, and storage. In this study, feasibility study for synthesizing the wolloastonite crystal using sand and waste glass was performed instead of using reactive but expensive silica fume for silica source.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.519-523
• /
• 2012

A kinetic study is reported on nucleophilic displacement reactions of benzyl 2-pyridyl carbonate 6 with alkalimetal ethoxides, EtOM (M = Li, Na, and K), in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of pseudo-firstorder rate constant $k_{obsd}$ vs. [EtOM] curve upward, a typical phenomenon reported previously for alkaline ethanolysis of esters in which alkali-metal ions behave as a Lewis-acid catalyst. The kobsd value for the reaction of 6 with a fixed EtOK concentration decreases rapidly upon addition of 18-crown-6-ether (18C6), a complexing agent for $K^+$ ion up to [18C6]/[EtOK] = 1.0 and then remains constant thereafter, indicating that the catalytic effect exerted by K+ ion disappears in the presence of excess 18C6. The reactivity of EtOM towards 6 increases in the order $EtO^-$ < EtOLi < EtONa < EtOK, which is contrasting to the reactivity order reported for the corresponding reactions of 2-pyridyl benzoate 4, i.e., $EtO^-$ < EtOK < EtONa < EtOLi. Besides, 6 is 1.7 and 3.5 times more reactive than 4 towards dissociated $EtO^-$ and ion-paired EtOK, respectively. The reactivity difference and the contrasting metal-ion selectivity are discussed in terms of electronic effects and transition-state structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1215-1220
• /
• 2004

Reactive distillation (RD) is a combination process where both separation and reaction are considered simultaneously in a single vessel. This kind of combination to enhance the overall performance is not a new attempt in the chemical engineering areas. The recovery of ammonia in the classic Solvay process for soda ash of the 1860s may be cited as probably the first commercial application of RD. The RD system has been used for a long time as a useful process and recently the importance of the RD is enlarged more and more. In addition to that, the application fields of RD are diversely diverged. To make the most of the characteristic of RD system, we must decide the best operating condition under which the process shows the most effective productivity and should decide the best control algorithm which satisfies an optimal operating condition. Phosgene which is a highly reactive chemical is used for the production of isocyanates and polycarbonates. Because it has high reactivity and toxicity, its utilization is increasingly burdened by growing safety measures to be adopted during its production. Dimethyl Carbonate (DMC) was proposed as a substitute of phosgene because it is non-toxic and environmentally benign chemical. In this study, RD is used for DMC production process and the transesterification is performed inside of column to produce DMC. In transesterification, the methanol and ethylene carbonate (EC) are used as the reactants. This process use homogeneous catalyst and the azeotrope exists between the reactant and product. Owing to azeotrope, we should use two distillation columns. For this DMC production process, we can suggest two configurations. One is EC excess process and the other is methanol excess process. From the comparison of steady state simulation results where the Naphtali-Sandholm algorithm is used, it showed the better performance to use the methanol excess process configuration than EC excess process. Then, the dynamic simulation was performed to be based on the steady state simulation results and the optimal control system was designed. In addition to that, the optimal operating condition was suggested from previous results.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.17-35
• /
• 2001

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single adsorption of lead, copper, zinc and cadmium on natural clays. As a result, it was found that in a single adsorption of lead and copper, about 50% of adsorption was occluded in carbonate phase, and in case of cadmium, about 80% of adsorption was occluded in exchangeable phase. At temperature below $25^{\circ}C$ about 60% of zinc was occluded in exchangeable phase but above $40^{\circ}C$ about 50% of zinc was occluded in carbonate phase. The effect of temperature on each occluded phase was largely observed in Fe-oxide, Mn-oxide and organic occluded phases. Besides, the adsorption of metals on natural clays was an endothermic reaction with the exception of exchangeable phase adsorption.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.157-170
• /
• 2000

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single and competitive adsorption of zinc and copper on natural clays. As a result, it was found out that in a single adsorption of zinc, the adsorption was mostly in the exchangeable phase, with increase n temperature. In a competitive adsorption of zinc, this trend was so strong that the exchangeable phase adsorption increase up to 80~90%. On the other hand, about 50% of copper was adsorbed in the carbonate occluded phase in single and competitive adsorptions. In the single adsorption the adsorption of carbonate occluded phase increased by 5% with the temperature increase and in the competitive adsorption the increase rate is about twice. The adsorption of zinc and copper on natural clays is an endothermic reaction with the exception of exchangeable phase adsorption.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.151-156
• /
• 2013

Crystallization of $CaCO_3$ is practiced on a polymethylsiloxane (PDMS) - based microfluidic system. Liquid- liquid reaction was investigated by mixing calcium chloride ($CaCl_2$) and sodium carbonate ($Na_2CO_3$) solution to crystallize $CaCO_3$. Aspartic acid (Asp) was added to investigate the morphology change such as vaterite and calcite. Suitable ratio of $Na_2CO_3$ and $CaCl_2$ was searched for initial seed formation. Christmas tree model was used as microfluidic device to form concentration gradient of $Na_2CO_3$ and $CaCl_2$. After observing microfluidic channel by using optical microscope, we found that seeds of $CaCO_3$ were formed under the condition that the ratio of $Na_2CO_3$ and $CaCl_2$ was 2:1. Morphology of crystals were also observed as $CaCO_3$ crystals grow. When Asp was added, vaterite crystal was more frequently found in two morphologies (vaterite and calcite) and seed formation and crystal growth were inhibited.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.22-30
• /
• 1995

The effects of agents in padding liquor on the fixation of vinylsulfonyl reactive dye of ground color and on the resist-dischargeability in resist-discharge printing of cotton fabrics with reactive/reactive dyes were investigated. Alkalis, such as sodium bicarbonate, sodium carbonate, sodium acetate and trichloro sodium acetate, were used to fix the dye for ground color on cotton fabrics. Sodium bicarbonate and sodium carbonate showed a good fixation of the dye for ground color, but they were ineffective to the white and the colored resistdsichargeabilities, which were caused by the fast fixation of the dye for ground color before its reaction with resist agent in printing paste. Therefore these are not suitable for the agent to fix the dyes for ground color because they deteriorate the resist-dischargeability. In case of sodium acetate, as the fixation yield of the dye for ground color was remarkably low. and the white resistdischargeability was not good, it had better not be used for the agent to fix the dye for ground color. However, the addition of sodium trichloroacetate to padding liquor gave a very good fixation yield of ground color, and showed an excellent resist-dischargeability. The effects of acetic acid in padding liquor on the fixation of the dye for ground color and on the resist-dischargeability were studied in case of immediate printing of resist-discharge pastes after padding and drying and in cases of printing after 1∼3 day-storage of padded goods. By the addition of 2% of 48% acetic acid aqueous solution to padding liquor, the white and the colored resist-dischargeabilities were improved and the fixation of the dye for ground color was good without any troubles. Especially, when the padded goods were stored for 2 or 3 days and printed with resist-discharge printing pastes, its addition was very effective on the resist-dischargeability.