• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.466-470
• /
• 2014

In this paper, organic solvent electrolytes were prepared by a mixture of propylene carbonate (PC), dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate ($TEABF_4$)s to evaluate the ionic properties of propylene carbonate (PC)/dimethyl carbonate (DMC) mixtures as solvents for a capacitor application, in view of improving the electrochemical performances. The bulk resistance and interfacial resistance of the mixture electrolytes were investigated using an AC impedance method. The morphology of carbon-based electrodes which were contained in different electrolytes was analyzed by scanning electron microscopy (SEM) method. From the experimental results, by increasing the FEC content, capacitance of electrodes was increased, and the interfacial resistance was decreased. In particular, by a content of 2 vol % FEC in 0.2 M $TEABF_4$ PC/DMC solvent, the electrolyte showed the superior capacitance. However, when FEC content exceeds 2 vol %, the capacitance was decreased and the interfacial resistance was increased.

• Korean Journal of Environmental Agriculture
• /
• 제4권2호
• /
• pp.71-77
• /
• 1985

Soil samples collected from paddy field adjacent to zinc-mining sites were sequentially extracted to assess chemical fractions of Cd, Zn, Cu and Pb. The purpose of this study was two fold; (i) to examine the chemical forms of heavy metal in soils by sequential extraction. and (ii) to determine relationships between the chemical distribution of heavy metal in the soil and the heavy metal content of the brown rice. The results are summarized as follows. The content of exchangeable, organically bound and carbonate Cd and residual Zn was 73.9% and 63.8% of total Cd and Zn in the soil, respectively. The content of exchangeable Cd, Zn and Pb in soil showed highly negative correlations with pH, organically bound Cd, carbonate Cd, sulfide Cd, Zn and Pb in soil showed highly positive correlations with pH. The content of organically bound Cd, Zn, Pb and carbonate Cu in soil showed highly positive correlations with organic matter content, while the content of sulfide Cu and residual Cd in soil showed highly negative correlation with organic matter content. The content of carbonate Cd, Zn, Pb and residual Cu in soil showed highly positive correlations with CEC, but the content of exchangeable Cd, Zn, Cu, Pb and organically bound Cu in soil showed highly negative correlations with CEC. The content of total, organically bound, carbonate, sulfide and residual Cd in soil were highly correlated with that of Cd in brown rice. The content of any Pb fractions in soil were not correlated with that of Pb in brown rice. The content of water soluble and exchangeable Zn in soil were highly correlated with that of Zn in brown rice.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제45권6호
• /
• pp.1-9
• /
• 2013

For the manufacture of linerboard with 100% KOCC, we tried to increase the solid content of wet web by employing GCC (grounded calcium carbonate) in the fiber furnish to save drying energy. Three different diameters of GCC, namely, 5, 10, and $35{\mu}m$, were used. To complement the strength loss by the addition of GCC, cationic starch and refining treatment were tried. It was found that the addition of $10-35{\mu}m$ dia. GCC to KOCC for $180g/m^2$ basis weight sheets increased the solid content of the furnish about 1-1.5% with better bulk and drainage properties. The loss of strength properties were compensated by the application of cationic starch and/or refining process to the KOCC furnish. The dia. of GCC of $35{\mu}m$ was, however, too large to make smooth surface of the sample sheet. So, the optimization process was required before implementing the results to the mill by selecting proper diameter and shape of the calcium carbonate.

• Journal of the korean society of oceanography
• /
• 제35권2호
• /
• pp.98-108
• /
• 2000

A geochemical study on a hemipelagic core sediment taken from the northwest Pacific Ocean (eastern edge of the Shikoku Basin) was conducted to use of excess barium (Ba(ex)) for evaluate the paleoceano-graphic changes. Also, the excursion of sedimentary Ba(ex) was compared with those of biogenic opal, carbonate and organic carbon content in the sediment during the last glacial and interglacial periods. The calculated Ba(ex) derived from the major and minor element shows a distinctive glacial-interglacial variations, and the mass accumulation rate (MAR) of Ba(ex) shows coincident variations with the MARs of biogenic fractions. Especially, strong positive correlation (r$^2$=0.85) between the MAR of Ba(ex) and the MAR of biogenic carbonate is recognized. Based on the strong positive correlation(r$^2$=0.85) between the MAR of Ba(ex) and the MAR of carbonate content, we estimated the degree of carbonate dissolution rate during the glacial and interglacial periods. Assuming the proportional variation and the refractory nature of barium exist between two factors, the variation of index Ca/Ba ratio in sediment indicates the degree of carbonate dissolution. Sedimentary Ca/Ba ratios index clearly show a striking fluctuation between the glacial and interglacial periods with higher positive correlation during glacial and lower correlation during interglacial. This fact indicates enhanced carbonate dissolution during interglacial period. Thus, the sedimentary Ca/Ba ratio in sedimentary records can be used as one of the useful tools for estimation of the relative degree of carbonate dissolution. The excursion of Ba(ex) and the sedimentary Ca/Ba ratio follows the typical pacific carbonate dissolution type(enhanced dissolution during interglacial and reduced dissolution during glacial time) as suggested by previous work (e.g., Wu et al., 1990). Variation in sedimentary Ca/Ba ratio thus strongly supports that glacial-interglacial fluctuation in carbonate dissolution has been prevailed in the northwest Pacific Ocean.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.161-165
• /
• 2004

Aluminum source in an Al-Fe coating reacts with molten carbonate and develops a protective $LiAlO_2$ layer on the coating surface during operation of molten carbonate fuel cells (MCFC). However, if aluminum content in an Al-Fe coating decreases to a critical level for some reasons during MCFC operation, a stable and continuous $LiAlO_2$ protective layer can no longer be maintained. The aluminum content in an Al-Fe coating can be depleted by two different processes; one is by corrosion reaction at the surface between the aluminum source in the coating and molten carbonate, and the other is inward-diffusion of aluminum atoms within the coating into a substrate. In these two respects, therefore, the decreasing rate of aluminum concentration in an Al-Fe coating was measured, and then the influences of these two aspects on the lifetime of Al-Fe coating were investigated, respectively.

• Carbon letters
• /
• 제16권1호
• /
• pp.51-56
• /
• 2015

Carbonate-type organic electrolytes were prepared using propylene carbonate (PC) and dimethyl carbonate (DMC) as a solvent, quaternary ammonium salts, and by adding different contents of 1-ethyl-3-methyl imidazolium tetrafluoroborate ($EMImBF_4$). Cyclic voltammetry and linear sweep voltammetry were performed to analyze conducting behaviors. The surface characterizations were analyzed by scanning electron microscopy method and X-ray photoelectron spectroscopy. From the experimental results, increasing the $EMImBF_4$ content increased the ionic conductivity and reduced bulk resistance and interfacial resistance. In particular, after adding 15 vol% $EMImBF_4$ in 0.2 M $SBPBF_4$ PC/DMC electrolyte, the organic electrolyte showed superior capacitance and interfacial resistance. However, when $EMImBF_4$ content exceeded 15 vol%, the capacitance was saturated and the voltage range decreased.

• 한국해양학회지
• /
• 제6권1호
• /
• pp.16-24
• /
• 1971

Over 40 bottom sediment samples were collected from the southern sea of Korea. The detailed textural characteristic of the sediments, percent calcium carbonate and heavy and light mineralogy were determined. Seaward of these sediments is a nearly broad belt of sandy sediments. In a broad outline it is considered to constitute a near-shore deposits left from a Pleistocene time of eustatically lowered level of sea water, because the sediments on the outer half of the continental shelf are much coarser than that nearer shore. The carbonate content increases strongly to the southeast and northwest of Cheju Island. It is believed that the high calcium carbonate content can be largely attributed to the availability of carbonate materials.

• Ocean and Polar Research
• /
• 제32권1호
• /
• pp.15-22
• /
• 2010

Calcium carbonate ($CaCO_3$) content was measured from 3 box core (BC060301, BC060303, BC070301) sediments, in addition to pilot core (PC313) sediments, from deep waters within the Western Pacific Ocean. At the two collection sites (BC060301, PC313) located close to the equator, downcore variation exhibited low $CaCO_3$ content during the interglacial period and high $CaCO_3$ content during the glacial period. Variation of coarse fraction (>$63\;{\mu}m$) content also followed changes in $CaCO_3$ content, indicating that dissolution effect of bottom water decreased during the glacial period. Such variation pattern is typical of the Pacific Ocean. However, downcore variation at the two collection sites (BC060303, BC070301) in the Philippine Sea contrasted the trend of the previous two cores (i.e., high $CaCO_3$ content during the interglacial period and low during the glacial period). This pattern is typical of the Atlantic Ocean. Such results may be attributed to the increasing dilution effect, initiated possibly by the increased transportation of terrigenous materials from nearby continent and archipelago during the glacial period when sea level was low. Alternatively, it is possible that the non-carbonate biogenic particles may have been responsible for dilution. Because of these uncertainties, the record of $CaCO_3$ variation in the deep Western Pacific Ocean is not regionally consistent.

• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.393-405
• /
• 2019

This paper evaluates the geotechnical and geo-engineering properties of the South Pars Zone (SPZ) marls in Assalouyeh, Iran. These marly beds mostly belong to the Aghajari and Mishan formations which entail the gray, cream, black, green, dark red and pink types. Marls can be observed as rock (soft rock) or soil. Marlstone outcrops show a relatively rapid change to soils in the presence of weathering. To geotechnically characterise the marls, field and laboratory experiments such as particle-size distribution, hydrometer, Atterberg limits, uniaxial compression, laboratory direct-shear, durability and carbonate content tests have been performed on soil and rock samples to investigate the physico-mechanical properties and behaviour of the SPZ marls in order to establish empirical relations between the geo-engineering features of the marls. Based on the experiments conducted on marly soils, the USCS classes of the marls is CL to CH which has a LL ranging from 32 to 57% and PL ranging from 18 to 27%. Mineralogical analyses of the samples revealed that the major clay minerals of the marls belong to the smectite or illite groups with low to moderate swelling activities. The geomechanical investigations revealed that the SPZ marls are classified as argillaceous lime, calcareous marl and marlstone (based on the carbonate content) which show variations in the geomechanical properties (i.e., with a cohesion ranging from 97 to 320 kPa and a friction angle ranging from 16 to 35 degrees). The results of the durability tests revealed that the degradation potential showed a wide variation from none to fully disintegrated. According to the results of the experiments, the studied marls have been classified as calcareous marl, marlstone and argillaceous lime due to the variations in the carbonate and clay contents. The results have shown that an increase in the carbonate content leads to a decrease in the degradation potential and an increase in the density and strength parameters such as durability and compressive strength. A comparison of the empirical relationships obtained from the regression analyses with similar studies revealed that the results obtained herein are reasonably reliable.

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1351-1355
• /
• 2020

In this study, the synthesis of lithium carbonate (Li₂CO₃) powder was conducted by a carbonation process using carbon dioxide gas (CO₂) from waste acidic sludge based on sulfuric acid (H₂SO₄) containing around 2 wt.% lithium content. Lithium sulfate (Li₂SO₄) powder as a raw material was reacted with CO₂ gas using a thermogravimetric apparatus to measure carbonation conditions such as temperature, time and CO₂ content. It was noted that carbonation occurred at a temperature range of 800℃ to 900℃ within 2 hours. To prevent further oxidation during carbonation, calcium sulfate (CaO₄S) was first introduced to mixing gases with CO₂ and Ar and then led to meet in the chamber. The lithium carbonate obtained was examined by inductively coupled plasma-mass spectroscopy (ICP-MS), X-ray diffraction (XRD) and scanning electron microscopy (SEM) and it was found that of lithium carbonate with a purity above 99% was recovered.