• 한국환경과학회지
• /
• 제5권5호
• /
• pp.569-577
• /
• 1996

과잉수소 반응조건하에서 사염화탄소의 열적 안정성과 수첨탈염소화 과정을 고찰하기 위한 모델로써 Cl/H의 비가 다른 순수 염화메탄화합물인 메틸염소, 메틸렌염소, 클로로포름과 사염화탄소를 이용하였다. 반응시간 1초에서 99% 분해되는 온도를 기준으로한 열적 안정성은 메틸염소는 $875^{\circ}C,$ 메틸렌염소는 $780^{\circ}C,$ 클로로포름은 $675^{\circ}C,$ 사염화탄소는 $635^{\circ}C$ 이었으며, 낮은 반응온도영역에서는 클로로포름의 열적 안정성이 사염화탄소보다 낮았으나 온도가 증가함에 따라 사염화탄소의 분해가 증가하여 $570^{\circ}C$ 이상에서는 클로로포름보다 쉽게 분해되었다. 사염화탄소의 분해 반응계에서의 생성물 고찰결과, 반응온도가 증가함에 따라 염화탄화수소 화합물 계열 생성물의 농도와 염화정도가 감소하였다. 과잉수소 반응조건에서 사염화탄소 열분해 실험결과, $850^{\circ}C$ 이상에서는 탈염소화 탄화수소화합물인 메탄, 에틸렌, 에탄의 생성물의 농도가 증가하였으며 염소화 합물로는 메틸염소만이 소량 검출되었다. 이는 염화정도가 낮은 화합물일수록 열적 안정성이 크다는 것을 의미하며 CCl4/H2 반응계에서 염화탄소화합물중 메틸염소가 열적 안정성이 가장 큰 화합물이었다.

• 대한화학회지
• /
• 제29권2호
• /
• pp.144-150
• /
• 1985

스티렌과 디비닐벤젠을 이용한 공중합체의 합성에 희석제로서 헵탄과 톨루엔을 사용하여 다공성 및 미세구조에 미치는 영향을 조사하였다. 스티렌디비닐벤젠 공중합체를 아미노화하여 음이온 교환수지를 합성하였으며 이 수지의 이온교환용량과 알코올 수용액에서 붕산에 대한 분포계수 값을 구하였고 이온교환 크로마토그래피와 질량분석기를 이용하여 붕소의 동위원소 분리효과를 연구하였다.

• Corrosion Science and Technology
• /
• 제17권5호
• /
• pp.203-210
• /
• 2018

This paper compares the inhibition properties of aspartic and lactic acid salts with nitrite ions and their effect on critical chloride concentration. The tests were carried employing carbon steel specimens in saturated lime solution with varying pH in the range between13 to 13.6. The critical chloride concentration was estimated through multiple specimen potentiostatic tests at potentials in the usual range for passive rebar in the alkaline concrete of atmospheric structures. During tests, chloride salt was added every 48 h until all the specimens showed localized attacks. The cumulative distribution curves, i.e. the number of corroded specimens as a function of the chlorides concentration was obtained. Furthermore, IR spectra were recorded for the evaluation of the presence of the organic inhibitors on the passivity film. The results confirmed the inhibitory effect of 0.1M aspartate comparable with nitrite ions, at a similar concentration. Addition of calcium lactate did not result in an increase in the critical chloride concentration. However, the formation of a massive scale containing the substance that could reduce the corrosion propagation was observed.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.672-679
• /
• 2007

The combustion characteristics of a liquefied petroleum gas-di-methyl ether (LPG-DME) compression ignition engine was investigated under homogeneous charge and stratified charge conditions. LPG was used as the main fuel and injected into the combustion chamber directly. DME was used as an ignition promoter and injected into the intake port. Different LPG injection timings were tested to verify the combustion characteristics of the LPG-DME compression ignition engine. The combustion was divided into three region which are homogeneous charge, stratified charge, and diffusion flame region according to the injection timing of LPG. The hydrocarbon emission of stratified charge combustion was lower than that of homogeneous charge combustion. However, the carbon monoxide and nitrogen oxide emission of stratified charge combustion were slightly higher than those of the homogeneous charge region. The indicated mean effective pressure was reduced at stratified charge region, while it was almost same level as the homogeneous charge combustion region at diffusion combustion region. The start of combustion timing of the stratified charge combustion and diffusion combustion region were advanced compared to the homogeneous charge combustion. It attributed to the higher cetane number and mixture temperature distribution which locally stratified. However, the knock intensity was varied as the homogeneity of charge was increased.

• Advances in concrete construction
• /
• 제10권4호
• /
• pp.289-299
• /
• 2020

A reliability analysis of the axial compressive load bearing capacity of postfire reinforced concrete (RC) columns strengthened with carbon fiber reinforced polymer (CFRP) sheets was presented. A 3D finite element (FE) model was built for heat transfer analysis using software ABAQUS. Based on the temperature distribution obtained from the FE analysis, the residual axial compressive load bearing capacity of RC columns was worked out using the section method. Formulas for calculating the residual axial compressive load bearing capacity of the columns after fire exposure and the axial compressive load bearing capacity of postfire columns retrofitted with CFRP sheets were developed. Then the Monte Carlo method was used to analyze the reliability of the axial compressive load bearing capacity of the RC columns retrofitted with CFRP sheets using a code developed in MATLAB. The effects of fire exposure time, load ratio, number of CFRP layers, concrete cover thickness, and longitudinal reinforcement ratio on the reliability of the axial compressive load bearing capacity of the columns after fire were investigated. The results show that within 60 minutes of fire exposure time, the reliability index of the RC columns after retrofitting with two layers of CFRPs can meet the requirements of Chinese code GB 50068 (GB 2001) for safety level II. This method is effective and accurate for the reliability analysis of the axial load bearing capacity of postfire reinforced concrete columns retrofitted with CFRP.

• 미생물학회지
• /
• 제22권3호
• /
• pp.157-165
• /
• 1984

Seasonal and spatial variations in propagule numbers of Trichoderma species were investigated every other month for one year in deciduous and coniferous forest soils and evaluated the relationships of Trichoderma spp. populations to soil environmental factors. The total population of Trichoderma spp. increased until summer and then declined until winter. The yearly mean frequency of Trichoderma spp. exceeded 1.4% of total fungal propagules in two sites. Decreases of absolute an relative propagule numbers of Trichoderma spp. with increasing soil depth were found and variation in Trichoderma spp. propagules caused by differences in soil depth ($0{\sim}50cm$) was greater than that caused by differences in sampling time. The most common species occurring in two sites was T. viride, followed by T. polysporum, T. koningii, and T. hamatum. Individual species of Trichoderma showed diferent abundance trend in accordance with sampling time. T. viride was dorminant from spring to autumn, while T. polysporum dominated over the other speicies in winter. Variations in propagule number of Trichoderma sppp. were principally mediated by the actions of biotic environmental factors rather than by the direct effects of abiotic factors. In multiple-regression analyses, 48% of the total vaiation in Trichoderma spp. propagules in deciduous site could be accounted for by total fungal propagules and soil CMCase actvity. In coniferous site, 65% of total variation could be accounted for by total fungal and bacterial propagules, moisture content and organic carbon content.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.274-277
• /
• 2009

There have been a number of works on manufacturing ultrafine grained steels with average ferrite grain sizes of smaller than a few micrometers to develop beneficial high strength steels. Among microstructures in low carbon steels, lath martensite is known to be useful to produce an ultrafine grained ferrite matrix and finely globular cementite particle. Thus, severe plastic deformation and subsequent annealing at lower temperature of lath martensite would become an effective way to produce ultrafine grained steels. However, most ultrafine grained steels exhibited a total elongation of a few per cent in tensile tests. Such a defect is one of the primary factors restricting the potential applications of ultrafine grained steels. Therefore, the improvement of the strength-elongation balance is required for the application of ultrafine grained structural steels. In this study, the effect of deformation temperatures on microstructure, such as ferrite grain size and the distribution of cementite particles, and mechanical property of lath martensite steels, was investigated. Specimens were fabricated through cold rolling or warm rolling and subsequent annealing.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1284-1292
• /
• 2006

Heat treatment is a controlled heating and cooling process to improve the physical and/or mechanical properties of metal products without changing their shapes. Today finite element method is widely used to simulate lots of manufacturing processes including heat treatment and surface hardening processes, which aims to reduce the number of time- and cost-consuming experimental tryouts. In this study we tried, using this method, to simulate the full carburizing process that consists of carburizing, diffusing and quenching, and to predict the distribution of carbon contents, phase fraction and hardness, thermal deformation and other mechanical characteristics as the results. In the finite element analysis deformation, heat transfer, phase transformation and diffusion effects are taken into consideration. The carburizing process of a lock gear, a part of the car seat recliner, that is manufactured by the fine blanking process is adopted as the analysis model. The numerical results are discussed and partly compared with experimental data. And a combination of process parameters that is expected to give the highest surface hardness is proposed on the basis of this discussion.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1376-1382
• /
• 2016

The discharge characteristics of inductively coupled $Ar/CH_4$ plasma were investigated by fluid simulation. The inductively coupled plasma source driven by 13.56 Mhz was prepared. Properties of $Ar/CH_4$ plasma source are investigated by fluid simulation including Navier-Stokes equations. The schematics diagram of inductively coupled plasma was designed as the two dimensional axial symmetry structure. Sixty six kinds of chemical reactions were used in plasma simulation. And the Lennard Jones parameter and the ion mobility for each ion were used in the calculations. Velocity magnitude, dynamic viscosity and kinetic viscosity were investigated by using the fluid equations. $Ar/CH_4$ plasma simulation results showed that the number of hydrocarbon radical is lowest at the vicinity of gas feeding line due to high flow velocity. When the input power density was supplied as $0.07W/cm^3$, CH radical density qualitatively follows the electron density distribution. On the other hand, central region of the chamber become deficient in CH3 radical due to high dissociation rate accompanied with high electron density.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.144-150
• /
• 2019

Recently, an increasing number of urban farmers are growing fresh vegetables and fruits themselves using urban garden or weekend farms. In other words, this is called urban agriculture. After the Industrial Revolution in the 18th century, the agricultural society changed from an agricultural society to an industrial society, and the population began to flock to the cities. With the continued increase of urban population, countries with abundant capital were able to control the distribution structure of food supplies and trade agreements among countries. Since energy consumption and carbon dioxide emissions caused by agricultural product movements have emerged as the main culprits of global warming, and our table is threatened by safety due to food supply that has no genetic modification or knowledge of the cultivation process, urban agriculture is already taking hold in the West. In other words, as agriculture met cities, its role grew. Each region actively conducts agricultural activities for raising poultry as well as growing vegetables and fruits by using flower beds of detached houses in the city center, rooftops of high and low buildings, or school playgrounds and small tributaries of land. The purpose of this study is to analyze and understand the significance and type of urban agriculture and to examine the cases of domestic and foreign urban agriculture based on this and to seek the developing direction of urban agriculture, which is gradually increasing. Tired of growing competition and rapid change, urbanites are seeking health and relaxation and are planning to present development measures for urban farming and conduct follow-up research to ensure safe food.