• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.526-532
• /
• 2013

The effect of CNT dispersion method on rheological and electrical properties of polystyrene/carbon nanotube (PS/CNT) nanocomposites via latex technology was compared. The nanocomposites were prepared through freeze-drying the dispersed suspension comprised of CNTs and PS particles. In this study, physical dispersion method, either sodium dodecylsulfate (SDS) addition or polyvinyl pyrrolidone (PVP) wrapping, was employed to prevent the deterioration of intrinsic properties of CNT caused by chemical modification. The physical method applied to latex technology was very effective in CNT dispersion. With SDS addition, the enhancement of rheological properties was low compared to PVP wrapping because the properties of matrix were deteriorated due to the incorporation of low molecular weight SDS. The electrical percolation threshold of PS/SDS-stabilized CNT and PS/PVP-wrapped CNT nanocomposites was 0.23 and 0.90 wt%, respectively. The enhancement of electrical conductivity was low in the case of PVP wrapping because the non-conducting PVPs wrapped around CNT restricted the electrical connection between CNTs.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.97-110
• /
• 2020

CO₂ capture and storage (CCS) is one of the promising technologies that can mitigate ever-growing emission of anthropogenic carbon dioxide and resultant climate change. Among them, chemical looping combustion (CLC) and calcium looping (CaL) are getting increasing attention recently as the prospective alternatives to the existing amine scrubbing. Both methods use metal oxides in the process and consist of cyclic reactions. Yet, due to their cyclic nature, they both need to resolve sintering-induced cyclic stability deterioration. Moreover, the structure of the metal oxides needs to be optimized to enhance the overall performance of CO₂ capture and storage. Deposition of thin film coating on the metal oxide is another way to get rid of wear and tear during the sintering process. Chemical vapor deposition or atomic layer deposition are the well-known, established methods to form thin film membranes, which will be discussed in this review. Various effective recent developments on structural modification of metal oxide and incorporation of stabilizers for cyclic stability are also discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.47-58
• /
• 2024

This study were conduced experimentally to analyze the heat-generating performance, flexural strength, and microstructure of conductive mortar mixed with micro steel fiber and multi-wall carbon nanotube (MWCNT). In the conductive mortar heat-generating performance and flexural strength tests, the mixing concentration of MWCNT was selected as 0.0wt%, 0.5wt%, and 1.0wt% relative to the weight of cement, and micro steel fibers were mixed at 2.0vol% relative to the volume. The performance experiments were conducted with various applied voltages (DC 10V, 30V, 60V) and different electrode spacings (40 mm, 120 mm) as parameters, and the flexural strength was measured at the curing age of 28 days and compared and analyzed with the normal mortar. Furthermore, the surface shape and microstructure of conductive mortar were analyzed using a field emission scanning electron microscope (FE-SEM). The results showed that the heat-generating performance improved as the mixing concentration of MWCNT and the applied voltage increased, and it further improved as the electrode spacing became narrower. However, even if the mixing concentration of MWCNT was added up to 1.0 wt%, the heat-generating performance was not significantly improved. As a result of the flexural strength test, the average flexural strength of all specimens except the PM specimen and the MWCNT mixed specimens was 4.5 MPa or more, showing high flexural strength due to the incorporation of micro steel fibers. Through FE-SEM image analysis, Through FE-SEM image analysis, it was confirmed that a conductive network was formed between micro steel fibers and MWCNT particles in the cement matrix.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.484-489
• /
• 2010

The cultivation of green manure crops plays an important role in soil quality and sustainability of agricultural system. However, the incorporation of green manure crops may be of concern because it can lead to strongly reducing conditions in the submerged soil. This study was conducted to evaluate the effects of rice husk carbon on rice (Oryza sativa L.) cultivation using green manure mixtures (hairy vetch + rye) in rice paddy. Field experiments were conducted in rice paddy soil (Shinheung series, fine loamy, mixed, nonacid, mesic family of Aeric Fluventic Haplaquepts) at the National Institute of Crop Science (NICS), Korea from October 2007 to October 2008. The experiments consisted of three treatments: application or no application of carbonized rice husk, and conventional fertilization. These treatments were subdivided into whole incorporation and aboveground removal of green manure mixtures. The redox potential (Eh) was higher upon application of the carbonized rice husk when compared to no application at 8 and 37 days after transplanting (DAT). The ammonium-N ($NH_4$-N) in soil was highest upon the application of carbonized rice husk + whole green manure incorporation at 17 and 49 DAT. Plant height and tiller number of rice were similar to the $NH_4$-N concentration in soil. Rice yields of application and no application of carbonized rice husk treatment were not significant. However, application of carbonized rice husk improved the soil physical properties such as bulk density and porosity after rice harvest. Therefore, the results of this study suggest that carbonized rice husk could be used as soil amendment for environmentally-friendly rice production under a green manure mixture-rice cropping system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.386-401
• /
• 2011

Mathematical models for various steps in coal gasification reactions were developed and applied to investigate the effects of operation parameters on dynamic behavior of gasification process. Chemical reactions considered in these models were pyrolysis, volatile combustion, water shift reaction, steam-methane reformation, and char gasification. Kinetics of heterogeneous reactions between char and gaseous agents was based on Random pore model. Momentum balance and Stokes' law were used to estimate the residence time of solid particles (char) in an up-flow reactor. The effects of operation parameters on syngas composition, reaction temperature, carbon conversion were verified. Parameters considered here for this purpose were $O_2$-to-coal mass ratio, pressure of reactor, composition of coal, diameter of char particle. On the basis of these parametric studies some quantitative parameter-response relationships were established from both dynamic and steady-state point of view. Without depending on steady state approximation, the present model can describe both transient and long-time limit behavior of the gasification system and accordingly serve as a proto-type dynamic simulator of coal gasification process. Incorporation of heat transfer through heterogenous boundaries, slag formation and steam generation is under progress and additional refinement of mathematical models to reflect the actual design of commercial gasifiers will be made in the near futureK.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.306-314
• /
• 2003

Bio-hydrogenation of $C_{18}$-unsaturated fatty acids released from the hydrolysis of dietary lipids in the rumen, in general, occurs rapidly but the range of hydrogenation is quite large, depending on the degree of unsaturation of fatty acids, the configuration of unsaturated fatty acids, microbial type and the experimental condition. Conjugated linoleic acid (CLA) is incompletely hydrogenated products by rumen microorganisms in ruminant animals. It has been shown to have numerous potential benefits for human health and the richest dietary sources of CLA are bovine milk and milk products. The cis-9, trans-11 is the predominant CLA isomer in bovine products and other isomers can be formed with double bonds in positions 8/10, 10/12, or 11/13. The term CLA refers to this whole group of 18 carbon conjugated fatty acids. Alpha-linolenic acid goes through a similar bio-hydrogenation process producing trans-11 $C_{18:1}$ and $C_{18:0}$, but may not appear to produce CLA as an intermediate. Although the CLA has been mostly derived from the dietary $C_{18:2}$ alternative pathway may be existed due to the extreme microbial diversity in the reticulo-rumen. Regardless of the origin of CLA, manipulation of the bio-hydrogenation process remains the key to increasing CLA in milk and beef by dietary means, by increasing rumen production of CLA. Although the effect of oil supplementation on changes in fatty acid composition in milk seems to be clear its effect on beef is still controversial. Thus further studies are required to enrich the CLA in beef under various dietary and feeding conditions.

• Journal of Powder Materials
• /
• v.19 no.2
• /
• pp.146-150
• /
• 2012

The effects of nano $Fe_xC$ addition to superconducting properties of $in$ $situ$ processed $MgB_2$ superconductors was examined. 0.1 wt.% and 1 wt.% nano $Fe_xC$ powders were mixed with boron and magnesium powders by ball milling. The powder mixtures were made into pellets by uniaxial pressing. The pellets were heat-treated at $700^{\circ}C-900^{\circ}C$ in argon atmosphere for $MgB_2$ formation. It was found by powder X-ray diffraction that the raw powders were completely converted into $MgB_2$ after the heat treatment. The superconducting transition temperature ($T_c$) and critical current density ($J_c$), estimated from susceptibility-temperature and $M-H$ curves, were decreased by nano $Fe_xC$ addition. The $T_c$ and $J_c$ decrease by nano $Fe_xC$ addition are attributed to the incorporation of iron and carbon with $MgB_2$ lattices (Fe substitution for Mg and C substitution for B) due to the high reactivity of the nano $Fe_xC$ powder.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.543-550
• /
• 1992

The production of xylanase and $\beta$-xylosidase was investigated in submerged culture of Aspergillus niger NRC 107. The maximum production occurred when the pH was controlled at 6.0 during the fermentation. Among the various carbon sources investigated, corn-cob xylan (1.5%, w/v) yielded maximal production of the enzymes. The $NaNO_{3}$ was the most favorable nitrogen source for enzyme production and $KH_2P0_4$ concentration at 0.3%(w/v) was found to be optimum. Incorporation of wheat bran to the culture medium improved xylanase production. Addition of L( -) sorbose to the culture medium promoted the secretion of $\beta$-xylosidase. It was possible to increase the production of xylanase (39.43 units/ml) and that of $\beta$-xylosidase (4.2 unitslml) by submerged culturing the A. niger NRC 107 in the modified medium.

• Journal of Plant Biology
• /
• v.12 no.2
• /
• pp.7-14
• /
• 1969

Dunaliella tertiolecta did not show any increase in respiration rate when supplied with glucose, glycerol, sucrose, L-alanine, acetate, pyruvate and succinate. This was in contrast to Chlorella pyrenoidosa, which, under identical conditions, showed significant increase when supplied with glucose or acetate but not with the other compounds. Production of 14CO2 from added 14C-glucose in D. tertiolecta was lower than the other 14C-labelled substrates: L-alinine, glycerol, succinate, but higher than 14C-sucrose addition. And it was also lower than C. pyrenoidosa experiments which was added 14C-glucose as a substrate. Light reduced amounts of labelled carbon dioxide from 14C-glucose or 14C-acetate and increased incorporation of 14C from the substrates to cell materials in either D. tertiolecta or C. pyrenoidosa. The contribution of 14C from 14C-glucose to 14CO2 in cell-free system of D. tertiolecta were much higher than in whole cell suspension. It was contrast to C. pyrenoidosa which were showed reduction of 14CO2 production in cell-free systems than whole cell suspensions. When cell-free systems of D. tertiolecta and C. pyrenoidosa were supplied with ATP, NAD, NADP or/and hexokinase, it was remarkably increased production of 14CO2 from the substrates than the control. It was concluded that the low ability of D. tertiolecta to metabolize glucose were caused by the impermeability of the cell membrane to glucose and were not due to deficiencies of enzyme systems concerning glucose metabolism. In the cell-free systems, it seemed to be more active pentose phosphate pathway than glycolytic pathway in D. tertiolecta.

• Korean Journal of Ecology and Environment
• /
• v.38 no.spc
• /
• pp.31-38
• /
• 2005

Diel change in urea decomposition activity of epiphytic algae on Phragmites stems and phytoplankton in a shallow littoral reed zone in the south basin of Lake Biwa was investigated with an in situ technique using $^{14}C$-labelled urea. The daily rates of urea decomposition (sum of urea carbon incorporation rate and $CO_2$ liberation rate) by epiphytic and planktonic algae were calculated as 180 ${\mu}$ mole urea surface shoot area $m^{-2}\;day^{-1}$ and 210 ${\mu}$ mole urea $m^{-3}\;day^{-1}$. The chlorophyll a specific urea decomposition rates of epiphytic and planktonic algae were 4.7 to 6.4 and 4.4 to 6.2 ${\mu}$ mole urea mg chl. $a^{-1}$ incubation $time^{-1}$ in daytime and 4.2 to 5.7 and 2.4 to 3.5 ${\mu}$ mole urea mg chl. $a^{-1}\;time^{-1}$ in nighttime, respectively. High values were obtained during 12:00 ${\sim}$ 18:00 and low values during 00:00 ${\sim}$ 06:00 for both epiphytic and planktonic algal communities. A clear diel periodicity in the urea decomposing activity of the planktonic algae was observed. The activity of the epiphytic algae, on the other hand, showed no destinctive variation during a day. The present results indicate that epiphytic algae are one of the significant urea decomposers in a reed zone, and that the diel patterns are quite difference between both algal communities.