• Carbon letters
• /
• 제10권3호
• /
• pp.202-207
• /
• 2009

Pitch-based carbon fiber tows were prepared from naphtha cracking bottom oil by reforming and carbonization. The relationship between exothermic heat and carbon contents of the fiber was investigated by changing the carbonization conditions. The carbon contents and the crystallinities of isotropic pitch-based carbon fibers were 86.8~93.8 wt% and 33.7~40.1%, respectively, which were linearly proportional to the increase of carbonization temperature from 700 to $1000^{\circ}C$. The exothermic heat (temperature increase) of fiber tows was measured in a short time, which was also linearly proportional to the increase of carbon contents due to the increase of crystallinity, even though the crystallinity was low. Therefore, the carbon contents or carbonization degree of fibers can rapidly and indirectly be estimated by measuring the surface temperature increase of fibers.

• 한국토양비료학회지
• /
• 제50권1호
• /
• pp.65-70
• /
• 2017

Soil was regarded as infinite resources but recently, soil is considered as invaluable resources that we need to protect and conserve. Main objective of this research was to evaluate soil value in terms of soil carbon contents. Soil was classified into forest, paddy, upland, and grass. Carbon contents in each soil was calculated based on soil chemical properties. Calculated soil carbon contents was ranged $15.31-108.86mg\;kg^{-1}$. Based on soil carbon contents, soil value was assumed adapting economic concepts. Calculated total soil value based on soil carbon contents was about 18.46 trillion won. Among others, carbon contents in forest was the highest and value was assumed 11.95 trillion won followed by paddy field (3.7 trillion won).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.99-102
• /
• 2015

To operate coal fired power plant efficiently is considered unburned carbon as important factor. But, unburned carbon contents change does not have an impact on Boiler performance simultaneously. we evaluated that unburned carbon contents change had an little influence on unburned carbon loss change for performance side at a real power plant.

• 한국환경농학회지
• /
• 제7권2호
• /
• pp.136-145
• /
• 1988

도시폐기물의 퇴비화 과정중 퇴비중의 탄소화합물 함량을 시기별로 조사한 결과 다음과 같다. 1. 유기물, 섬유소, 총 탄소, 유기탄소, 미생물 분해가능 탄소 함량은 퇴비화에 따라 감소되었고 리그닌, 미생물 이용 불가능 탄소함량은 약간 증가 되었다. 2. 총 탄소와 미생물 분해가 가능 탄소 함량과 차이는 6.2% 였다. 3. 유기물질의 실제 분해율은 분해율보다 큰 증가 현상을 보였다. 4. 모든 탄소화합물의 실제 분해 능력은 분해능력과 유사하였다. 5. 리그닌의 분해율 및 분해능력은(-)값을 보였으나, 실제 분해율 및 실제분해 능력은(+)값을 가졌다. 6. 퇴비중 유기물, 섬유소, 총탄소, 유기탄소, 미생물 이용 가능 탄소간에 고도의 유의성있는 정의 상관이있었다. 7. 미생물 분해불가능 탄소와 유기물, 섬유소, 총 탄소 유기탄소 및 미생물 분해가능 탄소와는 부의 상관이 있었다. 8. 퇴비중 리그닌과 미생물에 분해 불가능 탄소와도 고도의 정의 상관이 있었다.

• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.62-69
• /
• 2007

This study has been carried out to estimate aboveground carbon contents in an average 30-years-old Betula platyphylla and 32-years-old Juglans mandshurica stands in Chungju, Chungbuk Province. Nine sample trees were cut in each forest and soil samples were collected. Carbon concentration in stemwood, stembark, branch, and foliage were ranged from 54.6% to 57.0% in Betula platyphylla and 53.5% to 56.9% in Juglans mandshurica stands. Aboveground carbon contents was estimated by the equation model logWt=A+BlogD where Wt is oven-dry weight in kg and D is DBH in cm. Total aboveground carbon contents was 34.31t/ha in Betula platyphylla stand and 21.10t/ha in Juglans mandshurica stand. Aboveground net primary carbon production was estimated at 2.31t/ha/yr in Betula platyphylla stand and 2.03t/ha/yr in Juglans mandshurica stand.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.924-927
• /
• 2013

In this study, we proposed CMP-PLAs to replace the Al heat sinks as heat sink materials, and investigated heat dissipation characteristics of the LED lighting devices using them. The crystallinity of the proposed CMP-PLA heat sinks decreased with increasing carbon nanotube contents in CMP-PLA. However, the thermal conductivity was improved with the increase of the carbon nanotube contents. The heat dissipation characteristics of the LED lighting devices using CMP-PLA heat sinks was improved with increasing carbon nanotube contents in CMP-PLA. For the LED lighting devices using CMP-PLA heat sinks with 40% carbon nanotube contents, the initial temperature measured at the heat sink plate was $27^{\circ}C$, which increased as time, and it was saturated around $56^{\circ}C$ after an hour. The LED lighting devices using CMP-PLA heat sinks are expected to be functional materials that can reduce their weight and improve their electric properties, compared to those using existing Al heat sinks.

• 한국대기환경학회지
• /
• 제31권4호
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.68-74
• /
• 2005

Glycerol triacetate(triacetin) is the currently used common plasticizer in the making filters from cellulose acetate tow. For the mono acetate filter, the determination of triacetin contents is already established by CORESTA recommended method (No. 59). But unfortunately, the analytical method of triacetin in the activated carbon filter have not reported so far. In this study, it was established the analytical method of carbon filter's triacetin contents at various extraction conditions, bath ratio and internal standard materials. The confidential level appeared above $95\%$ when the extraction time, ISTD material and bath ratio was 3 hours, tripropionin and below 500 mg activated carbon / 50 $m\ell$ ethanol, respectively. Also, in the distribution of triacetin with filter materials in activated carbon filters, the triacetin amount was the most contained in activated carbon. Therefore, this method can be applied to the determination of triacetin contents in the activated carbon filter.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3589-3592
• /
• 2012

Carbon composite bipolar plates with various carbon black contents were prepared by a compression molding method. The electrical conductivity and electrochemical stability of the bipolar plates have been evaluated. It is found that the electrical conductivity increases with increasing carbon black contents up to 15 wt %. When the carbon black contents are greater than 15 wt %, the electrical conductivity decreases because of a poor compatibility between epoxy resin and carbon black, and a weakening of compaction in the carbon composite bipolar plate. Based on the results, it could be concluded that there are optimum carbon black contents when preparing the carbon composite bipolar plate. Corrosion tests show that the carbon composite bipolar plate with 15 wt % carbon black exhibits better electrochemical stability than a graphite bipolar plate under a highly acidic condition. When the optimized carbon composite bipolar plate is applied to vanadium redox flow cells, the performance of flow cells with the carbon composite bipolar plate is comparable to that of flow cells with the graphite bipolar plate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.114-115
• /
• 2006

In the present study we investigated effects by changing binder contents m the carbon counter electrode for dye-sensitized solar cells. Binder contents changed for 6 wt%, 7 wt%, 8 wt% before making carbon electrode. In the result of the measurement the specific resistance for 6 wt% was lowest among others And the surface of the carbon electrode which was measured by SEM was best m the 6 wt"%. The electrode properties be showing in an experiment were due to increment of surface roughness that appeared the carbon electrode, which decreased internal surface area.