• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1514-1519
• /
• 2001

This paper is concerned with design, manufacturing and performance test of LIPCA ( Lightweight Piezo- composite Curved Actuator) using a top carbon fiber composite layer with near -zero CTE(coefficient of thermal expansion), a middle PZT ceramic wafer and a bottom glass/epoxy layer with high CTE. The main point of this design is to replace the heavy metal layers of THUNDER by thigh tweight fiber reinforced plastic layers without losing capabilities to generate high force and large displacement. It is possible to save weight up to about 30% if we replace the metallic backing material by the light fiber composite layer. We can also have design flexibility by selecting the fiber direction and the size of prepreg layers. In addition to the lightweight advantage and design flexibility, the proposed device can be manufactured without adhesive layers when we use epoxy resin prepreg system. Glass/epoxy prepregs, a ceramic wafer with electrode surfaces, and a graphite/epoxy prepreg were simply stacked and cured at an elevated temperature (177 $^{circ}C$ after following an autoclave bagging process. It was found that the manufactured composite laminate device had a sufficient curvature after detached from a flat mold. The analysis method of the cure curvature of LIPCA using the classical lamination theory is presented. The predicted curvatures are fairly in agreement with the experimental ones. In order to investigate the merits of LIPCA, a performance test of both LIPCA and THUNDE$^{TM}$ were conducted under the same boundary conditions. From the experimental actuation tests, it was observed that the developed actuator could generate larger actuation displacement than THUNDERT$^{TM}$.

• 한국항공우주학회지
• /
• 제46권9호
• /
• pp.735-741
• /
• 2018

본 논문에서는 초고속 카메라와 삼차원 표면 측정기를 이용하여 삭마 재료의 표면 침식량을 정량적으로 분석하였다. 대기권 재진입 환경을 모사하기 위해 0.4 MW 아크 가열 풍동을 이용하여 흑연과 탄소/페놀릭 복합재료의 삭마 실험을 수행하였다. 초고속 카메라를 이용하여 실시간 삭마 실험 영상을 획득하고, 이를 분석하여 침식량과 침식률을 산출하였다. 또한, 삼차원 표면 측정기를 이용하여 삭마 전후 시편의 표면 형상을 측정하였으며, 시편의 높이 차이로부터 침식량 분포를 정밀하게 산출하였다. 이를 통해 표면 침식 현상을 종합 분석하는데 있어서 두 측정 결과를 상호 보완하는 것이 유효함을 확인하였다.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.393-398
• /
• 2008

Trace analysis of Cd and Pb at surface modified thick film graphite electrode with Bi nanopowder has been carried out using square-wave anodic stripping voltammetry (SWASV) technique. Bi nanopowder synthesized by gas condensation (GC) method showed the size of $50{\sim}100$ nm with BET surface area, $A_{BET}=6.8m^{2}g^{-l}$. For a strong adhesion of the Bi nanopowder onto the screen printed carbon paste electrode, nafion solution was added into Bi-containing suspension. From the SWASV, it was found that the Bi nanopowder electrode exhibited a well-defined responses relating to the oxidations of Cd and Pb. The current peak intensity increased with increasing concentration of Cd and Pb. From the linear relationship between Cd/Pb concentrations and peak current, the sensitivity of the Bi nanopowder electrode was quantitatively estimated. The detection limit of the electrode was estimated to be $0.15{\mu}g/l$ and $0.07{\mu}g/l$ for Cd and Pb, respectively, on the basis of the signal-to-noise characteristics (S/N=3) of the response for the $1.0{\mu}g/l$ solution under a 10 min accumulation.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.292-299
• /
• 2010

그래핀(graphene)은 $sp^2$ 탄소원자들이 벌집 격자를 이룬 형태의 2차원 나노시트를 의미하며, 높은 비표면적(이론치 $2600m^2\;g^{-1}$)과 우수한 전기전도도(전형치 $8{\times}10^5S\;cm^{-1}$) 및 기계적 강도로 인해 리튬이온전지의 음전극 활물질 및 초고용량 커패시터의 전극 활물질로서 사용 가능성이 높아지고 있다. 본 총설에서는 현재까지 알려진 그래핀 나노시트와 그래핀을 기반으로 하는 나노복합체의 제조법을 소개하고, 이를 리튬이온전지와 초고용량 커패시터의 전극소재로 적용하였을 때의 특성을 그 나노구조적 관점과 연관하여 논의하였다.

• 전기화학회지
• /
• 제12권1호
• /
• pp.34-39
• /
• 2009

니들 코크스의 활성화를 위해 $HNO_3$와 $NaClO_3$ 혼합용액에서의 산처리와 열처리를 행하였다. 산화처리 코크스와 열처리한 코크스의 미세구조는 XRD, FESEM, elemental analysis, BET, Raman spectroscopy를 이용하였으며, 전기이중층 거동은 충방전 분석을 행하였다. 니들 코크스는 산화처리 시간에 따라 산소의 중량 %의 증가와 함께 층간이 분리되어(001) 구조로 상변화가 일어나고, $200^{\circ}C$ 이상의 열처리에서 흑연구조 특성인(002) 구조로 되돌아갔다. 이들 산화처리 과정에서 층간에 관능기가 도입 되어 구조결함이 발생하고 1차 충전에서 전계 활성화에 의해 층간을 확장되어 2차 충전에서 전기이중층 용량을 발생 시키는 것으로 보인다. 24시간 산화처리후 $300^{\circ}C$ 열처리한 코크스의 2.5 V까지의 2 전극 기준에서 구한 활물질 중량 당 용량과 전극 부피 당 용량은 각각 32.1 F/g과 29.5 F/ml을 나타내었다.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.608-613
• /
• 2012

We investigated the property changes of MgO powders sintered at temperatures ranging from $700^{\circ}C$ to $1900^{\circ}C$ for 5minutes at a pressure of 2.7 GPa for a high-pressure high-temperature(HPHT) diamond synthesis process. The physical properties of the sintered MgO powders were characterized by optical microscopy, field emission scanning electron microscopy (FE-SEM), Vickers hardness tests, and by the apparent density, and X-ray diffractometry. An optical micro-analysis showed that white MgO powders became black after sintering due to carbon contamination from the graphite heat source. FE-SEM revealed the growth in the grain size of the MgO powders from $0.3{\mu}m$ to $50{\mu}m$ after sintering at $1700^{\circ}C$. The hardness and apparent density increased to $1800^{\circ}C$ while the samples were dedensified at $1900^{\circ}C$ due to the growth of isolated pores. According to the XRD analysis, no phase transformation occurred in the MgO powders. These results suggest that HPHT-sintered MgO powders can show an accelerated sintering process characterized by grain neck growth, pore connections, isolated pore growth and dedensification in 5 minutes, while these processes with the conventional sintering process take at least 5 hours.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.655-668
• /
• 2023

In radiography, an antiscatter grid is a well-known device for eliminating unexpected x-ray scatter. We investigate a new stationary grid artifact suppression method based on a nonsubsampled contourlet transform (NSCT) incorporated with Gaussian band-pass filtering. The proposed method has an advantage that extracts the Moiré components while minimizing the loss of image information and apply the prior information of Moiré component positions in multi-decomposition sub-band images. We implemented the proposed algorithm and performed a simulation and an experiment to demonstrate its viability. We did this experiment using an x-ray tube (M-113T, Varian, focal spot size: 0.1 mm), a flat-panel detector (ROSE-M Sensor, Aspenstate, pixel dimension: 3032 × 3800 pixels, pixel size: 0.076 mm), and carbon graphite-interspaced grids (JPI Healthcare, 18 cm × 24 cm, line density: 103 LP/inch and 150 LP/inch, ratio: 5:1, focal distance: 65 cm). Our results indicate that the proposed method successfully suppressed grid artifacts by reducing them without either reducing the spatial resolution or causing negative side effects. Consequently, we anticipate that the proposed method can improve image acquisition in a stationary grid x-ray system as well as in extended x-ray imaging.

• 대한화학회지
• /
• 제16권5호
• /
• pp.271-283
• /
• 1972

DTA에 衣한 國産無煙炭의 燃燒反應過程을 速度論的으로 解析할 수 있는 아래의 關係式을 導出하였다. $K=\frac{C_3{\cdot}W_0}{{\Delta}H{\cdot}{\Delta}C{\cdot}M{\cdot}S_A}(\frac{dy}{dt}+A(y-y_3))$ 이 式을 利用하여 各炭種에 對한 活性化 energy값을 求한 結果 非黑鉛性炭種은 40Kcal/mole, 黑鉛性炭種은 45Kcal/mole로서 炭化度가 增加되면 活性化 energy값이 增加된다는 것을 알았다. 無煙炭을 空氣中에서 燃燒시킬때 溫度에 衣하여 d_{(002)}$ X-線回折强度가 점차적으로 커지는 現象으로부터 無煙産中의 一部가 層構造(黑鉛化)로 變化됨을 알았으며 이 變化된 層構造에 生成된 $CO_2$의 一部가 接觸分解되어 다시 CO로 환원됨을 알았다. 그리고 無煙炭의 反應性을 左右하는 活性基의 種類는 -OH, -SH, -NH, -$CH_2-CH_3,$ 및 -CO, -COC-, -COOH가 存在하며 IR 로서 炭化度를 測定할 수 있었다

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.59-59
• /
• 2010

Graphene is a 2-D sheet of $sp^2$-bonded carbon arranged in a honeycomb lattice. This material has attracted major interest, and there are many ongoing efforts in developing graphene devices because of its high charge mobility and crystal quality. Therefore clear understanding of the substrate effect and mechanism of synthesis of graphene is important for potential applications and device fabrication of graphene. In a published paper in J. Phys. Chem. C (2008), the effect of substrate on the atomic/electronic structures of graphene is negligible for graphene made by mechanical cleavage. However, nobody shows the interaction between Ni substrate and graphene. Therefore, we have studied this interaction. In order to studying these effect between graphene and Ni substrate, We have observed graphene synthesized on Ni substrate and graphene transferred on $SiO_2$/Si substrate through Raman spectroscopy. Because Raman spectroscopy has historically been used to probe structural and electronic characteristics of graphite materials, providing useful information on the defects (D-band), in-plane vibration of sp2 carbon atoms (G-band), as well as the stacking orders (2D-band), we selected this as analysis tool. In our study, we could not observe the doping effect between graphene and Ni substrate or between graphene and $SiO_2$/Si substrate because the shift of G band in Raman spectrum was not occurred by charge transfer. We could noticed that the bonding force between graphene and Ni substrate is more strong than Van de Waals force which is the interaction between graphene and $SiO_2$/Si. Furthermore, the synthesized graphene on Ni substrate was in compressive strain. This phenomenon was observed by 2D band blue-shift in Raman spectrum. And, we consider that the graphene is incommensurate growth with Ni polycrystalline substrate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.422.1-422.1
• /
• 2016

Graphene quantum dots (GQDs), a new kind of carbon-based photo luminescent nanomaterial from chemically modified graphene oxide (CMGO) or chemically modified graphene (CMG), has attracted extensive research attention in the last few years due to its outstanding chemical, optical and electrical properties. To further extended its potential applications as optoelectronic devices, solar cells, bio and bio-sensors and so on, intensive research efforts have been devoted to the CMG. However, the CMG, a suspension of aqueous, have problematic since they are prone to agglomeration after drying a solvent. In this study, we synthesized the GQDs from graphite and deposited on silicon substrate by kinetic spray. The photo luminescent properties of deposited GQD films were analyzed and compared with initial GQDs suspension. In addition, its carbon properties were investigated with GQDs solution properties. The properties of deposited GQD films by kinetic spray were similar to that of the GQDs suspension in water. We could provide a pathway for silicon-based silicon based device applications. Finally, the well-adjusted GQD films with photo luminescence effects will show Energy-Down-Shift layer effects on silicon solar cells. The GQD layers deposited at nozzle scan speeds of 40, 30, 20, and 10 mm/s were evaluated after they were used to fabricate crystalline-silicon solar cells; the results indicate that GQDs play an important role in increasing the optical absorptivity of the cells. The short-circuit current density (Jsc) was enhanced by about 2.94 % (0.9 mA/cm2) at 30 mm/s. Compared to a reference device without a GQD energy-down-shift layer, the PCE of p-type silicon solar cells was improved by 2.7% (0.4 percentage points).