• 대한치과교정학회지
• /
• 제23권2호
• /
• pp.199-216
• /
• 1993

The purpose of this study was to quantify the biologic effects of the tensile forces from helical springs across the maxillary incisors on the periodontal tissues of rats. 39 Sprague-Dawlely rats were divided into a control group(3 rats) and three experimental groups(36 rats)-group 1, pressured with a light force(50-75g), group 2, with a heavy force(250-300g) and group 3, with a hen force(250-300g) plus laser irradiation. Autoradiographic and histopathologic observations were performed in 12, 24, 48 and 96 hours after force application. The result were as follow : 1. Hyalinized zone of periodontal ligament began to appear at pressure side in 12 hours in group 2 and group 3 ; all decreased in 96 hours except in group 2. 2. Alveolar bone resorption began to appear in 12 hours in group 2 and group 3 ; Group 2 showed more resorption than group 1 and no difference to group 3. 3. Tearing of periodontal ligament and vascular dilatation began to appear at tension side in 12 hours in all groups ; Group 2 showed more changes than group 1 and no difference to group 3 ; Decrease began to appear in 96 hours. 4. New bone formation began to appear at tension side in 12 hours and increased more and more ; No differences were shown of groups 5. New capillary proliferation began to appear at pressure side in 12 hours ; The changes were the greatest in group 3, group 2, group 1, in that order. 6. Positive reaction of cells to $[^3H]-thymidine$ was the greatest in 24 hours of all groups and decreased with times i Group 2 showed more reaction than group 1 and no difference to group 3.

• 대한기계학회논문집B
• /
• 제34권1호
• /
• pp.77-82
• /
• 2010

소형분석시스템에서 미세채널의 상판이 제거되면 상판에 의한 빛 에너지 손실이 대폭 감소되어 광학측정법으로 대상을 분석할 때 장점을 갖는다. 본 연구에서는 상판이 없는 사각단면 미세채널 내 액체유동을 이해하려는 목적으로 실험과 전산유체역학 해석을 수행하였다. 개방형 사각단면 미세채널에서 입자추적기법으로 유속을 측정하였고, 채널의 단면적 변화에 따른 모세관 유동현상을 이론적으로 해석하였다. 단면의 너비와 높이가 각각 20 ${\mu}m$로 제작된 미세채널의 주입부에 물을 떨어뜨렸을 때 물은 오직 모세관 힘에 의해 미세채널을 따라 이동하였다. 액체의 젖음현상에 영향을 미치는 중요한 유동 파라미터는 채널의 크기와 표면장력, 점성 등으로 볼 수 있으며, 미세채널에서 액체 유동을 조절하는데 이용될 수 있다.

• 대한치과교정학회지
• /
• 제22권2호
• /
• pp.373-388
• /
• 1992

The purpose of this study was to clarify the histologic changes in the expansion of midpalatal suture by the tensile forces. 39 Sprague-Dawley rats were divided into a control group (3 rats) and three experimental groups (36 rats) -group 1, pressured with a light force(50-75 g), group 2, with a heavy force(250-300 g) and group 3, with a heavy force (250-300 g) plus laser irradiation. Autoradiographic and histopathologic observations were performed in 12, 24, 48 and 96 hours after force delivery. The results were as follows; 1. The anterior portion of midpalatal suture was more separated than the posterior portion in all experimental groups. Group 2 showed more separation than group 1 and no difference to group 3 2. Ligament tearing appeared intensively in 24 hours, but the sutural matrices increased with times. ; Group 2 showed more tearing than group 1, and active regeneration of sutural matrices was observed in group 3. 3. Vascular dilatation appeared intensively in 24 hours and decreased with times. ; The anterior portion of midpalatal suture showed more dilatation than the posterior portion, ; The changes was the greatest in group 3, group 2, group 1, in that order. 4. New bone formation and the new capillary prolieferation began to appear in 12 hours and increased with times, : Group 2 showed more changes than group 1 and no difference to group 3. 5. Infiltration of inflammatory cells was little observed and was the greatest in group 2, group 1, group 3, in that order 6. Positive reaction of cells to $[^3H]$ thymidine was the greatest in 24 hours, and decreased with times ; The reaction was the greatest in group 3, group 2, group 1, in that order.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.567-572
• /
• 2013

In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem, it is difficult to apply to a continuous process such as a R2R(roll to roll) printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, an electrostatic atomizer sprays micro-drops from the solution injected into the capillary with electrostatic force generated by electric potential of about several tens kV. The organic solar cell based on a P3HT/PCBM active layer and a PEDOT:PSS electron blocking layer prepared from ESD method shows solar-to-electrical conversion efficiency of 1.42% at AM 1.5G 1sun light illumination, while 1.86% efficiency is observed when the ESD deposition of P3HT/PCBM is performed on a spin-coated PEDOT:PSS layer.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1147-1161
• /
• 1995

When ceramic membrance was made from metal salt solution in place of metal akoxide solution, crack free and good adhesion to supporter was optimized for sol stability and good adhesion force. A starting sol was prepared from aluminum oxychloride aqueous solutjion in order to inhibit the grain growthof Al2O3 during heat treatment. The crack free dip coating can't be achieved in 1mol/ι zirconium oxychloride solution because of the high viscosity which interferes with the hydration copolymerization between Al3+ ion and Zr4+ ion. Thus Al2O3-ZrO2 sol stability and viscosity for dip coating was effective when 0.01 mol/ι zirconium oxychloride was added. The minimizing of crack and achieving better adhesion to the supporter wa obtained by microwave drying, surfactant addition and ultrasonic dip coating in wet atmosphere. The result seems to minimize the capillary force and improve the adhesive ability to supporter during the process. Where the average pore size of Al2O3-ZrO2 ultrafilter ceramic membrane measured 17 Å by the BET method and observed γ-Al2O3 phase with tetragonal zirconia after firing at 700℃.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.187-188
• /
• 2005

In this paper, big free standing metal structures for electrostatic MEMS switches are easily fabricated using photoresist sacrificial layer. The entire process sequence, through the removal of the sacrificial layer, is kept below 150 $^{\circ}C$ to avoid curing problem of photoresist sacrificial layer. Metal structure is fabricated by thermal evaporator and a self test electrode is fabricated underlying metal suspended structure for testing by electrostatic force. The new wet release process is considered using methanol rinse, general wet release process cause stiction problem by capillary force during drying, and the yield is dramatically improved than previous wet release process using DI water rinse. The fabrication becomes much simpler and cheaper with use of a photoresist sacrificial layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.369-369
• /
• 2012

The present work deals with selective deposition of copper on fluoropolymers patterned silicon (111) surfaces. The pattern of fluoropolymer was fabricated by nanoimprint lithography (NIL) and plasma reactive ion etching (RIE) was used to remove the residuals layers. Copper was electrochemically deposited in bare Si regions which were not covered with fluoropolymers. The patterns of fluoropolymers and copper have been investigated by scanning electron microscopy (SEM). In this work, we used two deposition methods. One is galvanic displacement method and another is electrodeposition. Selective deposition works in both cases and it shows applicability to other materials. By optimization of the deposition conditions can be achieved therefore this process represents a simple approach for a direct high resolution patterning of silicon surfaces.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.147-151
• /
• 2007

This report explains the intervessel pit dimension of Populus tomentiglandulosa and its role in embolism repair according to proposed mechanism by Zwieniecki and Holbrook, 2000. It was found that mean contact angle ( ) of water droplets on the inner surface of vessels was $56^{\circ}$. Openings into the bordered pits were typically elliptical. The angle of the bordered pit chamber ($2{\alpha}$) was found $142.17^{\circ}$. From the capillary equation $Pmax\;=\;Gcos\;(\;+{\alpha})$, it was found that mathematically the maximum pressure 0.08MPa created by pits, can be employed to force the air within the embolized vessel into solution.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.245-250
• /
• 2003

Water is known to playa crucial role on friction of moving parts in nanoscale contact. Little is, however, known about the tribological behavior of a solid surface that is covered with water adsorption layer. The objective of this study is to investigate the nanotribological behavior of the water layer in relation to water affinity of the surface and relative humidity. This paper presents an examination of the frictional behavior of water adsorption layer as 'confined liquid film'. It is shown that the friction is inversely proportional to the hydrophilicity of surface and relative humidity. On the other hand, friction of hydrophobic surface is not influenced by relative humidity. A model is proposed for the water-mediated contact in which it is shown that the water layer between two hydrophilic surfaces with high relative humidity behaves as a lubricant.