• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1090-1095
• /
• 2003

본 논문에서는 고품질 적층형 수동 소자의 모델링 및 설계에 관하여 연구하였고, 설계된 수동 소자를 이용하여 안테나 스위치 모듈 내에 포함된 이중 대역 GSM/DCS 대역 분리용 적층형 다이플렉서를 설계$.$제작하여 그 특성을 고찰하였다. 적층형 수동 소자는 시스템의 소형화를 위해 인덕터는 정방형 스파이럴 구조로, 캐패시터는 입체적인 인터디지털 형태인 VIC 구조로 설계하였다. GSM 저역 통과 필터는 0.55 dB 이하의 삽입 손실과 12dB 이상의 반사 손실을 나타내며, 통과 대역 위쪽 저지 대역인 1800 MHz 부근에 감쇠극이 존재하도록 설계함으로써 DCS 통과 대역에서 26 dB 이상의 저지 특성을 나타내었다. DCS 고역 통과 필터는 0.82 dB 이하의 삽입 손실과 11 dB 이상의 반사손실을 가지며, 통과 대역 아래 쪽 저지 대역인 930 MHz 부근에 감쇠극이 존재하도록 설계함으로써 GSM 통과 대역에서 38 dB 이상의 저지 특성을 나타내었다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.190-200
• /
• 2019

The flyback converter, which can be regarded as a nonlinear time-varying system, has complex dynamics and nonlinear behaviors. These phenomena can affect the stability of the converter. To simplify the modeling process and retain the information of the output capacitor branch, a special sampled-data model of a peak current-mode (PCM) controlled flyback converter is established in this paper. Based on this, its dynamic behaviors are analyzed, which provides guidance for designing the circuit parameters of the converter. With the critical stability boundary equation derived by a Jacobian matrix, the stable operation range with a varied output capacitor, proportional coefficient of error the amplifier, input voltage, reference voltage and slope of the compensation ramp of a PCM controlled flyback converter are investigated in detail. Research results show that the duty ratio should be less than 0.5 for a PCM controlled flyback converter without ramp compensation to operate in a stable state. The stability regions in the parameter space between the output capacitor and the proportional coefficient of the error amplifier are enlarged by increasing the input voltage or by decreasing the reference voltage. Furthermore, the ramp compensation also can extend to the stable region. Finally, time-domain simulations and experimental results are presented to verify the theoretical analysis results.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.232-240
• /
• 2022

A variable vacuum capacitor (VVC), which is a variable element, is used to match impedance in plasma that changes with various impedance values, and its use is expanding with the rapid growth of the semiconductor business. Since VVCs have to secure insulation performance and vary capacitance within a compact size, electrode design and manufacturing are very important; thus, various technologies such as part design and manufacturing technology and vacuum brazing technology are required. In this study, based on the model of an advanced foreign company that is widely used for impedance matching in the manufacture of semiconductors and displays, a VVC that can realize the same performance was developed. The electrode part was designed, the consistency was confirmed through analysis, and the precision of capacitance was improved by designing a cup-type electrode to secure the concentricity of the electrode. As a result of the evaluation, all requirements was satisfied. We believe that self-development will be possible if satisfactory responses are received through evaluation by VVC consumers in the future.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.299-302
• /
• 1997

This paper describes a dynamic var compensator to compensate the line reactance for power transmission and distribution system. The compensator consists of a voltage source inverter with dc capacitor, coupling transformers, and control circuit. The operation of compensator was verified by computer simulations with EMPT and experimental works with a scaled hardware model. The advantage of the proposed system is rapid and continuous regulation of the reactive power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.735-738
• /
• 2000

In this paper we propose a series active power filter and a simple calculation method acquiring the reference voltage. A series active power filter is suitable to suppress harmonics produced by voltage type harmonic source such as a diode rectifier with filter capacitor on the DC side The proposed series active power filter system is applied to 3-phase 3-wire power system including the voltage type harmonic source. Experimental result obtained from a laboratory model are shown to verify the viability and effectiveness of the proposed system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.462-463
• /
• 2013

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.334-337
• /
• 2005

We have found that the hysteretic behavior of a polymer stabilized ferroelectric liquid crystal system coincides with Blinov et. al's model qualitatively. The hysteresis inversion frequency could be promoted up to 7000 Hz by connecting external capacitor and resistor in serial. In addition, the influence of temperature and the amplitude of the applied field on hysteresis-free switching of the cell could be minimized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1053-1055
• /
• 1998

Using EMTP model which describes bipolar HVDC system, switching level simulation results are presented in this paper. Voltage synchronization at point of common coupling, gate pulse generation and current control loops are represented in TACS module. The system consists of 100 km submarine cable rated 300 MW and 12 pulse rectifier and inverter stations which are connected to equivalent three-phase sources and loads through the 154 kV AC lines, respectively. In convertor stations, harmonic filters and capacitor banks are equipped to cancel out the harmonics generated by converters and to supply the required reactive power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.172-173
• /
• 2017

본 논문은 벅 차동전력조절 회로가 적용 된 다출력 스위치드-커패시터 부스트 컨버터의 소신호 모델 분석에 대한 논문이다. 제안하는 회로는 각 태양광 모듈의 최대전력점을 추정하기 위해서 제어된다. 제안하는 회로는 상태 공간 평균화 기법과 시그널 플로우 그래프를 통해서 해석하였으며 PSIM과 MATLAB을 통해서 증명하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.143.2-143.2
• /
• 2016

The influence of electric field on CO adsorbed on Pt(111) was investigated with reflection-absorption infrared spectroscopy (RAIRS) in ultrahigh vacuum system. The ice film capacitor method was used to apply electric field to the amorphous ice film with CO on Pt(111). Two systems were compared by measuring the change of the CO stretching vibrational mode under applied electric field; one is CO on Pt(111), and the other is CO buried inside an ice film on Pt(111). By comparing them, we were able to calculate the additional effect of adsorption of CO on Pt(111) on peak shift. The CO adsorbed on Pt(111) has shown larger peak shift than CO adsorbed with H2O when we applied stronger electric field. Additionally, the differences were observable when the applied electric field exceeds $1{\times}10V/m^8$.