• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.50-57
• /
• 2006

The water leak in water-cooled generator stator windings can generate the serious accidents such as insulation breakdown and it brings a generator to the unexpected sudden outage. Accordingly, it is important to diagnose the water absorption of them for the effective operation of power plant. Especially, the capacitance value which is measured for diagnosis is very small so the special diagnosis methods like stochastic theory are needed. KEPRI developed the water absorption test equipment and diagnosis technology for them. The developed diagnosis technology is applied to the real system and the results of water absorption test for stator windings are agreed to them of water leak test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1466-1468
• /
• 1996

The standards of the capacitance arc measured and analyzed by the dry nitrogen or mica film as a dielectric. In this paper, respectively the standard capacitors of 10 pF and 100 pF for the establishment of the dielectric loss tangent are made by $Al_{2}O_{3}$ crystal disc with the low dielectric loss tangent, and then measured the dielectric loss tangent with precision. To regard for the existence of capacitances just in the dielectric, 3-terminal configuration electrode is used. With using the 2D electric field simulator, precise design values are derived in addition to stray capacitance. As stated above method, respectively the standards of the capacitances with 10 pF and 100 pF arc made with the low dielectric loss tangent less than $10^{-4}$.

• 한국세라믹학회지
• /
• 제28권3호
• /
• pp.179-188
• /
• 1991

The semiconducting BaTiO3 ceramics used in this study were sintered in the reducing atomosphere(hydrogen gas) and neutral atmosphere(nitrogen gas), then were heat-treated in air to vary defect concentrations. In this experiment, the correlations between the composition analysis and electrical characteristics of these samples were investigated. When the BaTiO3 ceramics were sintered in N2 atmosphere, it was observed that the Ba contents near the interface were lower than that of the grain center, and these samples showed superior PTCR effects. From analysis of the resistivities of grains and grain boundaries by CIRM(Complex Impedance Resonance Method), it was confirmed that the PTCR effects were caused by the resistivity of grain boundaries. And from measurement of the capacitance at each temperature, the samples sintered in N2 atmosphere show the increase of room temperature resistance and the decrease of capacitance as a result of the increase of the charge depletion layers. This phenomenon agrees well with the cation deficiencies in the analytical results.

• 한국ITS학회 논문지
• /
• 제8권6호
• /
• pp.173-179
• /
• 2009

본 논문에서는 순시전압강하 보상장치 등의 전력변환시스템에 사용되는 수퍼 커패시터(또는 전기이중층콘덴서; EDLC)의 고장진단을 위한 파라미터의 측정기법에 관한 연구를 수행하였다. 직류 에너지의 저장을 위한 기존의 장치에는 납축전지 또는 전해 커패시터를 사용하여 왔으나 환경문제 및 에너지밀도의 측면에서 불리하여 최근에는 수퍼 커패시터의 사용이 주목을 받고 있다. 따라서 본 논문에서는 이러한 수퍼 커패시터의 내부 특성 및 고장 마모 등을 분석하기 위한 커패시터의 등가직렬저항(ESR) 및 정전용량을 측정하는 기법을 제시하여 고장진단의 주요한 데이터에 활용이 가능토록 하였으며, 또한 수퍼 커패시터를 적용한 순간전압강하에 대한 응용 실험을 수행하여 그 결과를 함께 제시하였다.

• 한국임상수의학회지
• /
• 제18권3호
• /
• pp.206-210
• /
• 2001

피부질환에는 보조 치료로 다양한 치료용 샴푸가 빈번하게 적용되고 있으나 이들 샴푸의 피부수분에 미치는 영향은 일반적으로 평가되지 않고 있는 실정이다. 따라서 치료용 샴푸의 정확한 처방을 위해서는 피부의 수분을 측정하기 위한 측정법이 필요하다. 본 연구는 여러 종류의 치료용 샴푸의 피부 수분에 대한 영향을 알아보기 위해 Corneometer를 이용하여 피부에 샴푸를 적용후 수분을 측정하였다. 5두의 건강한 개를 대상으로 7가지 샴푸로 Humilac, Sebocalm, Sebolytics, Etiderm, Benzoyl peroxide, HyLyt, Zn-7 Derm를 선정하여 적용하였다. Humilac의 경우 통계학적으로 유의한 피부수분의 증가는 적용 후 17분(p<0.05), 77분(p<0.01)에 나타났으며, Benzoyl peroxide의 경우 적용 후 77분(p<0.05)에 피부의 수분이 유의하게 감소되었다. 다른 샴푸의 경우 통계학적으로 유의하지 않았으나 전반적으로 감소하는 경향을 보였으며 적용 후 77분에 최초 적용 수치에 근접하게 감소하였다. 어떤 샴푸도 피부에 부작용을 유발하지 않았다. Corneometer는 실제 임상에서 피부의 수분을 평가하는데 간단하고 유용한 측정방법을 사료된다.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.179-188
• /
• 2007

최근 건설 생산 현장에서 불량 레미콘의 반입 문제 및 콘크리트 구조물의 내구성 확보가 커다란 관심사로 대두되고 있으며, 이에 따라 일본 등의 선진 외국에서는 레미콘의 품질보증 및 관리를 위하여 다양한 굳지 않은 콘크리트의 단위수량 측정 기법이 개발되어 규준화를 도모하고 있다. 본 연구에서는 현재 국내 외에서 연구 개발되어 적용을 도모하고 있는 굳지 않은 콘크리트의 단위수량 측정 기법 중 실제 건설 생산 현장에서의 레미콘 입수검사시 적용이 가능할 것으로 판단되는 전자레인지법, 에어메터법 및 정전용량법을 선정한 후 I, II 시리즈에서는 결합재 종류, 잔골재 종류 및 함수율, 단위수량, 물결합재비에 따른 단위수량 추정 성능을 평가하였으며, III 시리즈에서는 사용 재료의 물성 변화가 굳지 않은 콘크리트의 단위수량 추정 오차 발생에 미치는 영향을 검토하였다. 이와 같은 연구 결과를 바탕으로 본 연구에서는 건설 생산 현장에서 레미콘의 품질관리에 굳지 않은 콘크리트의 단위수량 측정 기법을 실용화하기 위한 기초 자료를 제시하고자 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.193-195
• /
• 1988

The native oxide films were thermally and anodically formed on the n-GaP substrates grown by SSD method and measured this oxide thickness and the chemical composition and the electrical properties with formation condition. The chemical composition of themally oxidized GaP film was composed of mostly $GaPO_4$ at temperature below $800^{\circ}C$ and mostly $\beta-Ga_{2}O_{3}$ above $800^{\circ}C$. But The chemical composition of anodically oxidized GaPfilm was composed of the mixture of $Ga_{2}O_{3}$ and $P_{2}O_{5}$. The barrier height of Al/oxide/n-Gap which was formed at $700^{\circ}C$ by thermal oxidation method were 1.10eV, 1.03eV in Current-Voltage measurement. Interface charge density were $4{\times}10^{12}q(C/cm^2)$ and $3{\times}10^{12}q(C/cm^2)$ in Capacitance-Voltage measurement respectively.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.47-55
• /
• 1996

In this study, steady state and perturbed pressures are experimentally measured under inherently compensated restrictors in externally pressurized air bearings. A piezo actuator is used for simulating small displacement perturbation in the air film. The pressures under the restrictors are measured by a miniature type pressure transducer and the height of the air film is measured by capacitance type gap sensors developed by Chapman's method. The perturbed pressure is obtained through Fourier transformation of the two signals. The measured perturbed pressures are in good agreement with the calculated values.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.274-278
• /
• 2005

Voltage transformer(VT) comparison measurement system is usually used for measurements of ratio error and phase angle error of VT made in industry. Both ratio error and phase angle error in VT are critically influenced by values of burden of VT used. External burden effects on both ratio error and phase angle error in VT are theoretically calculated. From the theoretical calculation, a method of evaluation for linearity of ratio error and phase angle error in VT measurement system have been developed using the standard capacitive burdens, with negligible dissipation factor less than 10$^{-4}$. These burden consists of five standard capacitors, with nominal capacitance of 1.1 $\mu$F, 1 $\mu$F, 0.1 $\mu$F, 0.01 $\mu$F, 0.001 $\mu$F. The developed method has been applied in VT measurement system of industry, showing in good consistency and linearity within 0.001 $\%$ between theoretical and measured values.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.239-248
• /
• 2008

In this study, a new method using a capacitive sensor and an adaptive filter was proposed to deal with artifacts contaminating an oscillation signal in oscilometric blood pressure measurement. The proposed method makes use of a variation of the capacitance between an electrode fixed to a cuff and an external object to detect artifacts caused by the external object bumping into the cuff. The proposed method utilizes the adaptive filter based on linear prediction to remove the detected artifacts. The conventional method using linear interpolation and the proposed method using the adaptive filter were applied to three types of the artifact-contaminated oscillation signals(no overlap, non-consecutive overlap, and consecutive overlap between artifacts and oscillations) to compare them in terms of the artifact reduction performance. The proposed method was more robust than the conventional method in the case of consecutive overlap between artifacts and oscillations. The proposed method could be useful for measuring blood pressure in such a noisy environment that the subject is being transported.