• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.539-545
• /
• 2004

In this paper, we consider the problem of capacitance matrix calculation for strip-line and other interconnects crossings. The problem is formulated in the spectral domain using the method of moments. Sinc-functions are employed as basis functions. Conventionally, such a formulation leads to a large, non-sparse system of linear equations in which the calculation of each of the coefficient requires the evaluation of a Fourier-Bessel integral. Such calculations are computationally very intensive. In the method proposed here, we provide simplified expressions for the coefficients in the moment method matrix. Using these simplified expressions, the coefficients can be calculated very efficiently. This leads to a fast evaluation of the capacitance matrix of the structure. Computer simulations are provided illustrating the validity of the method proposed.

• 대한수학회지
• /
• 제32권3호
• /
• pp.461-470
• /
• 1995

In this paper a capacitance matrix method is developed for the Poisson equation on a rectangle $$ (1-1) Lu \equiv -(u_{xx} + u_{yy} = f, (x, y) \in \Omega \equiv (0, 1) \times (0, 1) $$ with the homogeneous Dirichlet boundary condition $$ (1-2) u = 0, (x, y) \in \partial\Omega $$ where $\partial\Omega$ is the boundary of the region $\Omega$.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.93-99
• /
• 2014

The method of moments is applied to numerically compute the electrostatic capacitance of a parallel-plate rectangular capacitor of finite area. Each plate is discretized into 900 patches per unit area to ensure a high accuracy of computation. To further enhance computational results, the impedance matrix elements are additionally evaluated in the case that the observation patch is located above or below the source patch in the vertical direction. To examine the fringing effect at the edges of the capacitor, the normalized capacitances are computed as a function of separation distance. After these results have been verified by Palmer's formula, this method is extended to the computation of capacitances between two different size plates.

• 대한전자공학회논문지
• /
• 제27권6호
• /
• pp.843-850
• /
• 1990

A numerical method is presented for determining the static charge distribution and the capacitance of a round disk capacitor. In the employed numerical scheme annular patch subdomains are introduced to reduce the matrix size and to mprove the accuracy of the numerical calculations. The method of moments is utilized to calculate the charge distribution, and the capacitance and equipotential lines are also found from the numerically computed charge distributions. To show the validity of the results the proposed method is applied to the round disk and the dielectric filled capacitor.

• Composites Research
• /
• 제26권6호
• /
• pp.337-342
• /
• 2013

나노입자를 이용하여 강화 효과를 높이기 위해서는 고분자 기지 내부의 균일한 분산 상태를 확보하여야 한다. 또한 균일분산 조건 확보 후 균일 분산상태를 증명할 평가자료가 필요하다. 본 연구는 에폭시 수지와 SiC 나노입자를 혼합한 SiC/에폭시 복합 수지를 제조할 경우 커패시턴스 측정법을 이용한 강화재 분산도 예측 연구를 진행하였다. 커패시턴스는 전기용량을 의미하며 측정 재료의 내부 전하량과 비례한다. 기존 에폭시 수지에 비해 나노 SiC 입자를 함유할 경우 전하량이 증가되는 이론을 바탕으로 구간별 커패시턴스 측정에 따른 분산도 평가를 진행하고, 커패시턴스 분산도 예측방법에 대한 타당성을 FE-SEM과 물리적 강도 증가 방법으로 평가하였다. 소니케이션 분산 방법과 교반기 분산 방법을 이용하여 분산 방법에 따른 SiC 나노입자 분산도 상태를 비교하였다. 인장강도와 커패시턴스 간의 상관관계가 있었으며, 파단면에 대한 비교를 할 때 분산성 향상에 대한 차이를 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.87-94
• /
• 2005

A computer code for Electrical Capacitance Tomography (ECT) is developed to sense the cross sectional phase distribution of two-phase flow in the rectangular pipe in which the tomography sensor furnished by the insulated wall, electrodes, and electric field screen. The computer code had two steps for the image reconstruction. In the forward projection step, the sensitivity matrix was constructed based on the electric field calculated by the finite difference method. In the backward projection step, the sensitivity matrix and the measured capacitances were used to reconstruct the cross sectional image. Several algorithms including LBP, TR, ITR, and PLI were employed to find the proper one for the two-phase flow analysis. Since the dielectric constant of the water in two-phase flow is sensitive to the thermal parameter such as, temperature and pressure, the developed code was evaluated to find their accuracy, speed of calculation, and sensitivity to the variation of the dielectric constant. It was found that the iterative methods are superior to the direct methods for the image reconstruction, and the PLI method was the best in the variation of the dielectric constants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.604-608
• /
• 2004

In this paper, an efficient method is proposed to analyze the radial error of a miniaturized-high speed spindle system. Initially, a device is constructed for measuring the radial error motion using capacitance sensors. The capacitance sensors are placed perpendicular to the axis of the shaft and at 90o to each other. The spindle is rotated at high speed and the profile of the spindle is recorded. An algorithm is developed for analyzing the spindle data and determining the radial error of spindle. The present algorithm uses homogeneous transform matrix (HTM) method and iterative process for determining the radial error. The analysis procedure is performed for different speeds of the spindle. The data obtained from the present system and the results of evaluation are also presented in this paper. It is observed that this method is effective in determining and analyzing the spindle errors for high speed miniaturized spindle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.557-562
• /
• 2004

For constructing virtual environment it is more natural to model object as deformable body than as rigid body. High accuracy of simulation of model and low-latency computational cost for real-time simulation should be guaranteed. We pre-compute Green function through finite element analysis of deformable body and it is possible to simulate deformation of body in real-time environment using Capacitance Matrix Algorithm. Also, the capacitance matrix algorithm enables to construct the haptic rendering which serves the reaction force through a haptic device. The Newmark scheme is used for the more realistic haptic rendering and dynamic simulation in real-time.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1563-1572
• /
• 1995

The on-line cure monitoring during the cure process of fiber reinforced resin matrix composite material is important for the better quality and productivity. Among several cure monitoring methods, the dielectrometry that uses electrodes as its sensor is known to be the most promising method. In this study, the sensitivity of the dielectric sensor for the on-line cure monitoring was analyzed by finite element method and compared to the experimental results. Using the analytical results, the equation for the capacitance of the sensor was derived. Also, the optimal sensor design method was suggested after analyzing several different sensor shapes.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1115-1119
• /
• 2013

The carbon nanotube/poly-vinylidene fluoride (CNT/PVDF) composite films for the use of electronic devices were fabricated by spray coating method using the CNT/PVDF solution, which was prepared by adding PVDF pellets into the CNT dispersed N-Methyl-2-pyrroli-done (NMP) solution. The CNT/PVDF composite films were peeled off from the glass substrate and were investigated by the scanning electron microscopy, which revealed that the CNTs were uniformly dispersed in the PVDF films and thickness of the films were approximately $20{\mu}m$. The capacitance of the CNT/PVDF films increased dramatically by adding CNTs into the PVDF matrix, and finally saturated approximately 1880 pF. However, the I-V curves didn't show any saturation effect in the CNT concentration range of 0 ~ 0.04 wt%. Therefore we can control the performance of the devices from the CNT/PVDF composite film by adjusting the current level resulted from the CNT concentration with the uniform capacitance value.