• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1197-1199
• /
• 1993

The molecular electronic devices of organic materials are of current interest. Langmuir-Blodgett(LB) method is the most possible candidate for the development of the molecular electronic devices. One of the critical problems for applications of the LB films to the commercial products will be an electrical conductivity within a LB film. We studied the monolayer characteristics and electrical conductivity of the 1:1 mixture LB films of N-docosylquinolium-TCNQ and $TCNQ^0$. There were some differences in the $\pi-A$ isotherm and UV-visible absorption spectrum of N-docosylquinolium-TCNQ and 1:1 mixture. The small critical area of the $\pi-A$ isotherm for 1:1 mixture may result from the bilayer formation. We confirmed the incorporation of the $TCNQ^0$ with the N-docosylquinolium-TCNQ from the UV-visible absorption spectrum. But the electrical conductivity measured was $10^{-7}$ S/cm for the 1:1 mixture film layered at the surface pressure of 35 mN/m. We couldn't gain any electrical conductivity by mixing the $TCNQ^0$ into the N-docosylquinolium-TCNQ layer. We supposed that $TCNQ^0$ mixed in was not packed parallel to the TCNQ anion radical faces.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.80-80
• /
• 2000

Surface acoustic wave (SAW) devices have become more important as mobile telecommunication systems need h호-frrequency, low-loss, and down-sized components. Higher-frequency SAW divices can be more sasily realized by developing new h호-SAW-velocity materials. The ZnO/diamond/Si multilasyer structure is one of the most promising material components for GHz-band SAW filters because of its SAW velocity above 10,000 m/sec. Silicon carbide is also a potential candidate material for high frequency, high power and radiation resistive electronic devices due to its superior mechanical, thermal and electronic properties. However, high price of commercialized 6- or 4H-SiC single crystalline wafer is an obstacle to apply SiC to high frequency SAW devices. In this study, single crystalline 3C-SiC thin films were grown on Si (100) by MOCVD using bis-trimethylsilymethane (BTMSM, C7H20Si7) organosilicon precursor. The 3C-SiC film properties were investigated using SEM, TEM, and high resolution XRD. The FWHM of 3C-SiC (200) peak was obtained 0.37 degree. To investigate the SAW propagation characteristics of the 3C-SiC films, SAW filters were fabricated using interdigital transducer electrodes on the top of ZnO/3C-SiC/Si(100), which were used to excite surface acoustic waves. SAW velocities were calculated from the frequency-response measurements of SAW filters. A generalized SAW mode. The hard 3C-SiC thin films stiffened Si substrate so that the velocities of fundamental and the 1st mode increased up to 5,100 m/s and 9,140 m/s, respectively.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.531-535
• /
• 2017

In this study, Leuconostoc mesenteroides CJNU0041 was isolated from Korean traditional food kimchi and antimicrobial activity of fermented broccoli with the isolate was tested against pathogenic Clostridium difficile. L. mesenteroides CJNU0041 showed higher glucosidase activity than other isolates. As the results of physiological properties such as pH and viable cell count during broccoli fermentation with L. mesenteroides CJNU0041, we confirmed that 48 hours was optimal fermentation time. As the results of metabolite analysis by HPLC, metabolites were changed during the fermentation. Especially, the growth of C. difficile was inhibited by the fermented broccoli. Therefore, L. mesenteroides CJNU0041 might be a candidate for improving the functionality of natural materials by lactic acid fermentation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.37 no.2
• /
• pp.95-99
• /
• 2018

In insect defense system, antimicrobial peptides (AMPs) are one of important biological molecules to survive in a variety of environments. Insect can synthesize AMPs to protect against invading pathogens in humoral immune response. Taking more advantage of biological antimicrobial molecules, we report antibacterial activity of two cecropin type peptides, cecropin and moricin, isolated from the silkworm against four salmonella species. In this work, we purified antimicrobial candidate peptides (AMCP) from the extracts of immune challenged silkworm larval hemolymph by two-step chromatographic purification procedure, cation exchange and gel permeation chromatography. The molecular weights of purified peptides were estimated to be about 4 ~ 5 kDa by Tricin SDS-PAGE analysis, and identified as silkworm cecropin and moricin by NCBI BLAST homology search with their N-terminal amino acid sequences. As antibacterial activity assay, the purified peptides showed stronger antibacterial activity against Salmonella pathogens with an MIC value of $1{\sim}4{\mu}g/mL$. Therefore two cecropin type peptides purified from the silkworm will be valuable potential materials for development of new natural antibiotics.

• Advances in materials Research
• /
• v.8 no.1
• /
• pp.37-46
• /
• 2019

Electrochemical double layer capacitors (EDLCs) which are fabricated using carbon based electrodes have been emerging at an alarming rate to fulfill the energy demand in the present day world. Activated charcoal has been accepted as a very suitable candidate for electrodes but its cost is higher than natural graphite. Present study is about fabrication of EDLCs using composite electrodes with activated charcoal and Sri Lankan natural graphite as well as a gel polymer electrolyte which is identified as a suitable substitute for liquid electrolytes. Electrochemical Impedance Spectroscopy, Cyclic Voltammetry and Galvanostatic Charge Discharge test were done to evaluate the performance of the fabricated EDLCs. Amount of activated charcoal and natural graphite plays a noticeable role on the capacity. 50 graphite : 40 AC : 10 PVdF showed the optimum single electrode specific capacity value of 15 F/g. Capacity is determined by the cycling rate as well as the potential window within which cycling is being done. Continuous cycling resulted an average single electrode specific capacity variation of 48 F/g - 16 F/g. Capacity fading was higher at the beginning. Later, it dropped noticeably. Initial discharge capacity drop under Galvanostatic Charge Discharge test was slightly fast but reached near stable upon continuous charge discharge process. It can be concluded that initially some agitation is required to reach the maturity. However, the results can be considered as encouraging to initiate studies on EDLCs using Sri Lankan natural graphite.

• Composites Research
• /
• v.32 no.3
• /
• pp.134-140
• /
• 2019

Graphene nanoplatelets (GNP), one of the graphene derivatives is famous as the most proper candidate for industrial applications. However, current performance of GNPs as reinforcing filler in composites is limited by their agglomeration and physicochemical heterogeneity. Herein, an approach to produce non-covalently functionalized GNPs (F-GNPs) is reported which possesses potential to be extended as the industrial level of mass production. The one-step functionalization process uses melamine, a low-cost chemical, to prevent agglomeration and dispersion in polar solvents. Furthermore, a purification strategy called salting-out process based on differences in the dispersibility of the individual F-GNP flakes is reported to separate F-GNPs. The functionalization and separation process developed in this paper provides a strategy to use GNPs at the industrial level in composite applications.

• Microbiology and Biotechnology Letters
• /
• v.48 no.4
• /
• pp.471-479
• /
• 2020

The aim of this study was to investigate the anti-oxidant and anti-inflammatory activities of the Rhododendron weyrichii flower extract fermented using Shindari, a traditional Jeju barley Nuruk-based fermentation. In this study, we examined the antioxidant potential of R. weyrichii flower extracts (RF) and R. weyrichii flower extracts fermented with Nuruk or Shindari (RFFN or RFFS, respectively) using various in vitro antioxidant assays including DPPH and ABTS radical scavenging assays, total phenol content and FRAP assays. We also evaluated the anti-inflammatory activity of the RF and RFFS on murine RAW 264.7 cells. The anti-inflammatory activity was evaluated by treating the RAW 264.7 cells with various concentrations (6.25, 12.5, 25, and 50 ㎍/ml) of RF or RFFS. As a result, we observed that the ABTS radical scavenging activity and total phenol content of RFFS was higher than that of RF and RFFN. Additionally, lipopolysaccharide-induced nitric oxide (NO) production was significantly lower in RFFS-treated cells when compared to the LPS-treated control. In addition, RFFS-treated cells exhibited decreased expression of inducible NO synthase (iNOS) proteins and high-performance liquid chromatography (HPLC) fingerprinting showed that both the quercetin and quercetin glucoside (quercitrin and isoquercitrin) levels were affected by the fermentation process. In conclusion, our data suggests that traditional fermentation could be an important strategy in improving the biological properties of raw materials including their antioxidant and anti-inflammatory activities. Finally, RFFS may be a candidate for developing topical antioxidant and anti-inflammatory agents.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.467-471
• /
• 2021

A ladder-like polysilsesquioxane (LPMA64) functionalized with a crosslinkable group was synthesized and used for the preparation of organic-inorganic hybrid gel polymer electrolytes through a thermal crosslinking process of the liquid electrolytes. A small weight percent of LPMA64 polymer crosslinker (5 wt%) was able to form a well-developed network structure, resulting in good dimensional stability with high ionic conductivity. The lithium-sulfur batteries fabricated with organic-inorganic hybrid gel polymer electrolytes exhibited stable C-rate and cycling performance with excellent Coulombic efficiency due to the alleviated lithium polysulfide shuttling effect during prolonged cycling. The result demonstrates that the organic-inorganic hybrid gel polymer electrolytes could be a promising candidate electrolyte for application in lithium-sulfur batteries.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.290-302
• /
• 2018

Background: The main purpose of drug delivery systems is to deliver the drugs at the appropriate concentration to the precise target site. Recently, the application of a thin film in the field of drug delivery has gained increasing interest because of its ability to safely load drugs and to release the drug in a controlled manner, which improves drug efficacy. Drug loading by the thin film can be done in various ways, depending on type of the drug, the area of exposure, and the purpose of drug delivery. Main text: This review summarizes the various methods used for preparing thin films with drugs via Layer-by-layer (LbL) assembly. Furthermore, additional functionalities of thin films using surface modification in drug delivery are briefly discussed. There are three types of methods for preparing a drug-carrying multilayered film using LbL assembly. First methods include approaches for direct loading of the drug into the pre-fabricated multilayer film. Second methods are preparing thin films using drugs as building blocks. Thirdly, the drugs are incorporated in the cargo so that the cargo itself can be used as the materials of the film. Conclusion: The appropriate designs of the drug-loaded film were produced in consideration of the release amounts and site of the desired drug. Furthermore, additional surface modification using the LbL technique enabled the preparation of effective drug delivery carriers with improved targeting effect. Therefore, the multilayer thin films fabricated by the LbL technique are a promising candidate for an ideal drug delivery system and the development possibilities of this technology are infinite.

• Plant Breeding and Biotechnology
• /
• v.5 no.2
• /
• pp.134-142
• /
• 2017

Resource plants are important and have strong potential for a variety of utilities as crops or pharmaceutical materials. However, most resource plants remain wild and thus their utility for breeding and biotechnology is limited. Molecular markers are useful to initiate genetic study and molecular breeding for these understudied resource plants. We collected various wild collections of Peucedanum japonicum which is indigenous resource plants utilized as oriental medicine and leafy vegetables in Korea. In this study, we produced two independent whole genome sequences (WGSs) from two collections and identified large scale polymorphic simple sequence repeat (pSSR) based on our pipeline to develop SSR markers based on comparison of two WGSs. We identified a total of 452 candidate pSSR contigs. To confirm the accuracy and utility of pSSR, we designed ten SSR primer pairs and successfully applied those to seven collections of P. japonicum. The WGS and pSSR candidates identified in this study will be useful resource for genetic research and breeding purpose for the valuable resource plant, P. japonicum.