• Restorative Dentistry and Endodontics
• /
• v.17 no.2
• /
• pp.343-354
• /
• 1992

The purpose of this study was to analyze the relationship between linear and volumetric measurements of apical dye penetration in canals obturated by various kinds of methods. The canals of 108 roots without crown were conventionally prepared and randomly assigned to four group. The canals of group I a2 were obturated by lateral condensation with sealer, group II a2 by thermoplasticized low-temperature ($70^{\circ}C$) gutta-percha with sealer, group III by Thermafil endodntic obturation with sealer and group IV by injection-molded thermop-lasticized guttapercha One mm of root apex was exposed to a 2 % methylene blue solution at $7^{\circ}C$or 10 days, and the quality of apical seals was assessed by measuring the leakage linearly and volumetrically. The obtained results were as follows: In linear measurements, group II showed significanty less leakage than group III, I and group III also showed less than group N, but no statistically significant difference was demonstrated between the others. In volumetric measurements, group II showed significantly less leakage than group I and II, and no significant differnce from group III. There was a weak significant correlation between the linear measurement and the volumetric measurement(r=0.3391, P<0.001).

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.141-151
• /
• 2020

Purpose: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. Materials and Methods: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. Results: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups(P<0.05). Conclusion: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.19-26
• /
• 2017

Objectives: Recently, bioceramic sealers like EndoSequence BC Sealer (BC Sealer) have been introduced and are being used in endodontic practice. However, this sealer has limited research related to its retreatability. Hence, the aim of this study was to evaluate the retreatability of two sealers, BC Sealer as compared with AH Plus using micro-computed tomographic (micro-CT) analysis. Materials and Methods: Fifty-six extracted human maxillary incisors were instrumented and randomly divided into 4 groups of 14 teeth: 1A, gutta-percha, AH Plus retreated with chloroform; 1B, gutta-percha, AH Plus retreated without chloroform; 2A, gutta-percha, EndoSequence BC Sealer retreated with chloroform; 2B, gutta-percha, EndoSequence BC Sealer retreated without chloroform. Micro-CT scans were taken before and after obturation and retreatment and analyzed for the volume of residual material. The specimens were longitudinally sectioned and digitized images were taken with the dental operating microscope. Data was analyzed using an ANOVA and a post-hoc Tukey test. Fisher exact tests were performed to analyze the ability to regain patency. Results: There was significantly less residual root canal filling material in the AH Plus groups retreated with chloroform as compared to the others. The BC Sealer samples retreated with chloroform had better results than those retreated without chloroform. Furthermore, patency could be re-established in only 14% of teeth in the BC Sealer without chloroform group. Conclusion: The results of this study demonstrate that the BC Sealer group had significantly more residual filling material than the AH Plus group regardless of whether or not both sealers were retreated with chloroform.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.515-519
• /
• 2004

Straight access cavity design allows the operator to locate all canals, helps in proper cleaning and shaping, ultimately facilitates the obturation of the canal system. However, change in the fracture strength according to the access cavity designs was not clearly demonstrated yet. The purpose of this study was to determine the influence of different access cavity designs on the fracture strength in endodontically treated mandibular anterior teeth. Recently extracted mandibular anterior teeth that have no caries, cervical abrasion, and fracture were divided into three groups (Group 1 : conventional lingual access cavity, Group 2 : straight access cavity, Group 3 : extended straight access cavity) according to the cavity designs. After conventional endodontic treatment, cavities were filled with resin core material. Compressive loads parallel to the long axis of the teeth were applied at a crosshead speed of 2mm/min until the fracture occurred. The fracture strength analyzed with ANOV A and the Scheffe test at the 95% confidence level. The results of this study were as follows: 1. The mean fracture strength decrease in following sequence Group 1 (4558.90{\;}\pm{\;}77.40{\;}N$), Group 2 ($494.07{\;}\pm{\;}123.98{\;}N) and Group 3 ($267.33{\;}\pm{\;}27.02{\;}N). 2. There was significant difference between Group 3 and other groups (P = 0.00). Considering advantage of direct access to apical third and results of this study, straight access cavity is recommended for access cavity form of the mandibular anterior teeth.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.381-389
• /
• 2000

Lateral condensation with gutta-percha and sealer has been shown to provide an excellent apical seal; however, the lateral condensation technique has demonstrated less favorable apical leakage results in curved canals when compared with straight canals. Placement of endodontic spreaders to within 1 to 2mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel(SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium(NT) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. The purpose of this study was to evaluate the effect of NT finger spreader on the sealing ability in lateral condensation technique, compared with conventional SS finger spreader. Twenty four standardized resin models simulating curved canals(30 degree) were randomly placed into 2 groups and instrumented to a #30 master apical file size with Ni-Ti Profile .04 taper series using step down technique. Each groups was obturated with standardized gutta-percha cone by standard lateral condensation technique using SS finger spreader, NT finger spreader. And then, each model was sectioned horizontally with microtome at 1, 2, 3, 4, 5mm levels from the apex. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using a t test for independent samples. The results as follows ; 1. The total mean ratio of area of gutta-percha was 89.20${\pm}$7.00(%) for SS spreader group. 92.20${\pm}$5.17(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). 2. At 3mm level, the mean ratio of area of gutta-percha was 88.32${\pm}$5.41(%) for SS spreader group, 95.25${\pm}$2.60(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). At 1,2,4mm levels, NT spreader group showed greater mean ratio of area of gutta-percha than SS spreader group, too. But there was no statistically significant difference. 3. At 5mm level, the mean ratio of area of gutta-percha was 91.83${\pm}$3.42(%) for SS spreader group, 87.91${\pm}$3.68(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). This study concluded that the NT spreader demonstrated somewhat favorable apical sealing effect than SS spreader in prepared curved canals. The clinical use of NT spreaders may enhance our ability to create better apical seals in curved canals, but further studies in this area will help clarify some of the remaining areas with which practitioners are concerned, such as compaction forces exerted by NT spreaders.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.317-322
• /
• 2016

Mineral trioxide aggregate (MTA) is widely used in endodontic therapy as a pulp-capping material, root or furcal perforation repair material, and for apexification and obturation of the root canal system. The purpose of this study was to formally document cases of MTA application in South Korean children and adolescents. Through this research, the practice of using MTA will be introduced and familiarized to the clinical practitioners. This study involved endodontic treatment using MTA for fractured crowns in 11- and 12-year-old. The children were followed up for 12 months until the pulp vitality was confirmed; in young permanent teeth with immature roots, the pulp is integral to the process of apexogenesis. These observational results regarding the use of MTA as an apexification material in non-vital immature permanent incisors appear to provide promising results in the search for new materials to meet existing endodontic needs.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.536-542
• /
• 2000

임상에서 점차 Mineral Trioxide Aggregate (MTA)에 대한 우수성이 소개되면서, apical matrix로의 사용은 주목할 만하다 할 수 있다. 본 연구의 목적은 개방형근관에서 MTA가 apical matrix로 사용될 때의 치근단 밀폐효과를 알아 보고, 근관충전의 시기와 matrix의 두께가 치근단 밀폐에 미치는 영향을 치근단 미세누출의 측면과 matrix탈락빈도의 측면에서 관찰하고자 하는 것이다. 개방형 근관을 재현하고자 45개의 발거된 단근치에 #90크기로 근단공을 형성하였고, 투명레진등을 이용하여 치근단 병소를 갖는 치조골을 재현한 후, 4개의 실험 군과 1개의 대조 군으로 분류하였다. A군: 2mm두께의 MTA matrix 형성후, 열연화된 Gutta-percha와 AH26 sealer를 이용하여 즉시 근관충전. B군: 2mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 24시간 후 근관충전. C군: 4mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 즉시 근관충전. D군: 4mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 24시간 후 근관충전. 대조군: matrix를 사용하지 않고 열연화된 Gutta-percha와 AH26 sealer를 이용하여 근관충전하였다. Matrix의 탈락이 있는 경우 기록하고 완전 수세 후 다시 시행하였다. 색소침투정도의 평가를 위해 methylene blue에 치아를 48시간 침수시킨 후 협설로 양분하였다. 각 시편들을 고배율 현미경 관찰 후 비디오촬영 하였고, digitalized image analysing program을 이용하여 두명의 관찰자가 누출의 정도를 평가한 후, One-way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결과를 얻었다. 1. Matrix를 사용한 실험 군이 matrix를 사용하지 않은 대조 군에 비해 유의성 있게 낮은 누출을 보였다(p<0.05). 그러나 근관충전시기와 matrix의 두께를 달리한 실험군 내에서는 누출에 유의성 있는 차이가 나타나지 않았다. 2. 모든 실험군에서 gutta-percha를 이용한 근관충전의 시기에 matrix탈락 및 gutta-percha의 압출은 발생하지 않았다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.700-708
• /
• 2001

Traumatic injuries in young patients can result in the interruption of the development of the incompletely formed roots. In teeth with incomplete root-end formation and necrotic pulps, the root canals must be completely debrided. Because of a lack of an apical stop and the presence of thin and fragile walls in these teeth, it is imperative to perform apexification to obtain an adequate apical seal. Calcium hydroxide has become the material of choice for apexification. Despite its popularity for the apexification procedure, calcium hydroxide therapy has some inherent disadvantages that include variablility of treatment time, unpredictability of apical closure, difficulty in patient follow-up, and delayed treatment. An alternative treatment to long-term apexification procedure is the use of an artificial apical barrier that allows immediate obturation of the canal. MTA(Mineral Trioxide Aggregate) is a powder consisting of fine hydrophilic particles of tricalcium silicate, tricalcium aluminate, tricalcium oxide and silicate oxide. MTA has a pH of 12.5 after setting, similar to calcium hydroxide. This may impart some antimicrobial properties. MTA has low solubility and a radiopacity slightly eater than that of dentin. Also, MTA leaked significantly less than other materials and induced hard-tissue formation more than other materials.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.144-152
• /
• 2000

Intracoronal bleaching is currently disregarded by many clinicians because of the potential consequence of cervical resorption. To prevent this complication it is recommended that intra coronal barrier materials be placed over the root canal obturation and sodium perborate be used with water rather than with hydrogen peroxide. The purpose of this study was to evaluate the amount of the hydrogen peroxide penetration according to the difference in intracanal base materials and sodium perborate preparation. Fifty extracted intact premolars were instrumented, and filled with gutta-percha. And then the outer surface of the teeth was sealed with wax exposing the CEJ. The prepared teeth were placed in plastic tubes containing 1.5ml distilled water with their entire root submerged into the solution, The teeth were divided into the following five groups. In the first two groups gutta-percha was removed without placement of barrier, and then water or superoxole(30% $H_2O_2$) with sodium perborate were used respectively for bleaching. In the other three groups, after removal of gutta-percha, an intracanal isolating barrier(ZPC, IRM, Fuji II LC) was placed and then bleached with sodium perborate and superoxole. The bleaching procedure was performed 4 times with 1 week interval. The results were as follows : 1. All the groups showed a tendency of increasing penetration amount with increasing treatment times(P<0.05). 2. After the 1st and 2nd treatments, there was no significant difference in microleakage among the groups. 3. After the 3rd bleaching with superoxole and sodium perborate, there was no significant difference in microleakage between gutta-percha alone group and gutta-percha with ZPC, Fuji II LC barrier group. But significant difference was found between IRM barrier group and other groups(P<0.01). 4. After the 4th bleaching with superoxole and sodium perborate, there was no significant difference between gutta-percha alone group and gutta-percha with barrier groups. 5. After the 4th treatment, the group bleached with sodium perborate and water without barrier showed lower hydrogen peroxide penetration than that of other groups(P<0.01).

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.186-191
• /
• 2006

This study evaluated the effect of two different calcium hydroxide ($Ca(OH)_2$) paste removal techniques on the apical leakage of canals obturated with gutta percha cones and sealer after removing a $Ca(OH)_2$ dressing using an electrochemical method. Seventy extracted single-rooted teeth were instrumented on with Profile rotary files under NaOCl irrigation. Fifty-eight canals were filled with calcium hydroxide paste, which was then removed using one of the following two techniques. In group A, calcium hydroxide was removed using only NaOCl irrigation, and in group B, the canals were re-prepared with a Profile rotary files-one size larger than the previous instrument and were irrigated with NaOCl. In both groups, the root surfaces were coated twice with nail varnish from CEJ to an area 4 mm away from the apex after canal obturation. Apical leakage was measured using an electrochemical method for 24 days. All the specimens showed leakage that increased markedly in the first three days. There was no significant difference between the two groups (p>0.05). The effect of two calcium hydroxide paste removal techniques on the apical leakage was not different during a short period.