• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1997

This paper presents the development of real-time estimation and control details for a computer vision-based robot control method. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes know 4-axis Scorbot manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method. The method is tested experimentally in two ways : First the validity of estimation model is tested by using the self-built test model. Second, the practicality of the presented control method is verified in performing 4-axis manipulator's assembly task. These results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as deburring and welding.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.152-158
• /
• 2003

A machine-vision guided inspection system with go-no gauges for inspecting eggcrate assemblies in steam generators is considered. To locate the gauge at the right place, periodic corrective actions for its position and traveling direction are required. We present a machine vision algorithm for determining inserting position and traveling direction of the go-no gauge. The overall procedure of the algorithm is composed of camera calibration, eggcrate image preprocessing, grid-height adjustment, intersection point estimation between two intersecting grids, and adjustment of position and traveling direction of the gauge. The intersection point estimation is performed by using linear regression with a constraint. A test with a real eggcrate specimen shows the feasibility of the algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.517-522
• /
• 2011

Conventional projection welding systems suffer from lots of defective products caused by manual handling. In this paper, we introduce a projection welding system that performs automatic identification, welding and counting of components and products. The proposed system checks the existence and identifies placement of components to be welded by a vision camera. After welding of the components, it automatically updates product counts and dressing items. We show that the proposed welding system can reduce the defect rate and improve the productivity through experimental test with a existing system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1973-1979
• /
• 2000

Driving the need for machine vision system is growing consumer demand for quality and defect-free products. Especially it is the most important in tarpaulin's manufacturing process achieves automatically by machine vision instead of by man vision. In this paper pinholes detection is performed by using morphology algorithms. Top hat transform is one of morphology applications. This transform take high performance of defect detection in the case that unexpected changes occur in some non-uniform background. For pinholes defect, automatic visual inspection system has been developed, which was composed by a line-scan camera, illumination, a frame grabber, a motor driver and control units. This system has excellent capacity to defect pinholes to the 0.1 mm by 0.5 mm in size and to work in moving objects by maximum 20 m/min in speed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1114-1119
• /
• 1995

This paper presents the development of estimation model and control method based on the new computer vision. This proposed control method is accomplished using a sequential estimation scheme that permits placement of the rigid body in each of the two-dimensional image planes of monitoring cameras. Estimation model with six parameters is developed based on a model that generalizes known 4-axis scara robot kinematics to accommodate unknown relative camera position and orientation, etc. Based on the estimated parameters,depending on each camers the joint angle of robot is estimated by the iteration method. The method is tested experimentally in two ways, the estimation model test and a three-dimensional rigid body placement task. Three results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as assembly and welding.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.368-375
• /
• 1995

A computer vision system was built to generate images of a stationary egg. This system includes a. CCD camera, a frame grabber, and an incandescent back lighting system An image processing algorithm was developed to accurately detect surface holes and surface cracks on eggs. With 20W of incandescent back light, the detection rate was shown to be the highest. The Sobel operator was found to be the best among various enhancing filters examined. The threshold value to distinguish between the crack and the translucent spots was found to be linear with the average gray level of a whole egg image. Those values of both gray level and area were used as criteria to detect holes in egg and those values of both area and roundness were used to detect cracks in egg. For a sample of 300 eggs, this system was able to correctly analyze an egg for the presence of a defect 97.5% of the time. On the average, it took 59.5 seconds to analyze an egg image and determine whether or not it was defected.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.191-193
• /
• 2007

Pantograph sliding plate abrasion auto-detect system, one of the electric rail car auto-detecting devices, is a system that decides how much abrasion and when to replace without an inspector physically looking at the abrasion on the wet plate using machine vision, a cutting-edge technology. This paper covers the cause of deteriorating reliability that affects pantograph wet plate edge detection due to noise added to the video when it rains. In order to remove such noise, problems should be checked through Smoothing, Averaging mask and Median filter using filtering technique and stable edge detection without being affected by noise should be induced in video measurement used in machine vision technology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1104-1110
• /
• 2014

This paper investigates geometric effect of landmarks on three-dimensional navigation error in landmark-based vision navigation systems. Dilution of precision is derived for landmark measurement error on the focal plane of the camera and separately expressed in position DOP and attitude DOP. Values of DOP are observed for various configurations of landmarks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2019-2023
• /
• 2005

In this paper, an autonomous omni directional cleaning robot which recognizes an obstacle and a battery charger is introduced. It utilizes a robot vision, ultra sonic sensors, and infrared sensors information along with appropriate algorithm. Three omni-directional wheels make the robot move any direction, enabling a faster maneuvering than a simple track typed robot. The robot system transfers command and image data through Blue-tooth wireless modules to be operated in a remote place. The robot vision associated with sensor data makes the robot proceed in an autonomous behavior. An autonomous battery charger searching is implemented by using a map-building which results in overcoming the error due to the slip on the wheels, and camera and sensor information.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.65-76
• /
• 1996

This paper describes the issue relating to the design and implementation of a high-precision vision system for monitor inspection. We present several monitor inspection algorithms which evaluate the geometric distrotions of the patterns on the inspection target monitor. Also, to inspect color distortion acquired form color CCD camera into the XYy coordinate, accurately. The proposed monitor inspection system is implemented on IBM PC/486, and the user interface is developed on microsoft windows to assist unskilled users for easy use. Using the developed vision system, Experiments on the inspection accuracy and speed were performed and the results are presented.