• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.683-686
• /
• 2000

A new approach to the task of aligning a robot using camera is presented in this paper. We apply an elitist GA to find the joints angles of manipulator to reach target position instead of using nonlinear least error method. Since it employs parallel search and have good performance in solving optimization problems. In order to improve convergence speed, the floating coding method and geometry constraint conditions are used. Experiments are carried out to exhibit the effectiveness of vision-based control using elitist genetic algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.9-18
• /
• 1998

The components with J-lead. which are more integrated and smaller than ones with Gull-wing. are rapidly being used in electronic board such as the PCB, for they have the advantage of occupying a small space compared to the other components. However, the development of inspection system for these new components is not so rapid as component development. Component-inspection with J-lead using vision system is difficult because they are hidden from camera optical axis. X-ray inspection, which has the advantage of inspecting the inside of solder state, is used to J-lead inspection. However. it is high cost and dangerous by leaking out X-ray compared to vision system. Therefore, in this paper, we design vision system suited to J-lead inspection and then propose algorithm which have flexibility in mount and rand error.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.75-80
• /
• 2008

This paper presents a vision based autonomous inspection system for welding quality control of a RV sinking seat. In order to overcome the precision error that arises from a visible inspection by an operator in the manufacturing process of a RV sinking seat, the machine vision based welding quality control system is proposed. It consists of the CMOS camera and the NI vision system. The geometry of the welding bead, which is the welding quality criteria, is measured by using the captured image with a median filter applied on it. The image processing software for the system was developed using the NI LabVIEW software. The proposed welding quality inspection system for RV sinking seat was verified using experimentation.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.331-333
• /
• 2007

Robot manipulator is one of the important features in service robot area. Until now, there has been a lot of research on robot" manipulator that can imitate the functions of a human being by recognizing and grasping objects. In this paper, we present a robot arm based on the object recognition vision system. We have implemented closed-loop control that use the feedback from visual information, and used a sonar sensor to improve the accuracy. We have placed the web-camera on the top of the hand to recognize objects. We also present some vision-based manipulation issues and our system features.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.62-68
• /
• 1998

This paper presents the application of computer vision for the purpose of determining the position of the unknown object in the plane. The presented control method is to estimate the six view parameters representing the relationship between the image plane coordinates and the real physical coordinates. The estimation of six parameters is indispensable for transforming the 2-dimensional camera coordinates to the 3-dimensional spatial coordinates. Then, the position of unknown point is estimated based on the estimated parameters depending on the cameras. The suitability of this control scheme is demonstrated experimentally by determining position of the unknown object in the plane.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.559-563
• /
• 2000

In this paper we describe a method for aligning a robot gripper using image information. The region of gripper is represented from HSI color model that has major advantage of brightness independence. In order to extract the feature points for vision based position control, we find the corners of gripper shape using polygonal approximation method which determines the segment size and curvature of each points. We apply the vision based scheme to the task of alignment of gripper to reach the desired position by 2 RGB cameras. Experiments are carried out to exhibit the effectiveness of vision based control using feature points from polygonal approximation of gripper.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.55-62
• /
• 2000

Autonomous farm operation needs to be developed for safety, labor shortage problem, health etc. In this research, an autonomous tractor for tillage was investigated using machine vision and a fuzzy logic controller(FLC). Tractor heading and offset were determined by image processing and a geomagnetic sensor. The FLC took the tractor heading and offset as inputs and generated the steering angle for tractor guidance as output. A color CCD camera was used fro the image processing . The heading and offset were obtained using Hough transform of the G-value color images. 15 fuzzy rules were used for inferencing the tractor steering angle. The tractor was tested in the file and it was proved that the tillage operation could be done autonomously within 20 cm deviation with the machine vision and the FLC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.119-124
• /
• 1994

Morden industrial society pursues unmanned system and automation of manufacturing rocess. Abreast with this tendensy, prodution of goods which requires advaned accuracy is increasing as well. According to this, the work sensing time of dressing by monitoring and diagnosis the condition of grinding, which is the representative way in accurate manufacturing, is a important work to prevent serios damages which affect grinding process or products by wearing wheel. Computer vision system is composed, so that grind wheel wurface was acquired by CCD camera and the change of cutting is composed. Then we used autometic threshoding technique from histogram as a way of deviding cutting edge which is used in manufacturing from the other parts. As a result, we are trying to approach unmanned system and sutomation by deciding more accurate time of dressing and by visualizing behavior of grinding wheel by marking use of computer vision.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.191-198
• /
• 2015

In this paper, six-degree-of-freedom (DoF). Displacement measurement technique using a compact stereo-vision system is proposed. The measuring system consists of a camera, an optical prism, two plane mirrors, and a planar marker on a target. The target was attached on an object so that its six-DoF displacement can be calculated using a proposed coordinates estimating algorithm and stereo images of the marker. A prototype was designed and fabricated for performance test. From the test results, it can be confirmed that the proposed measuring technique can be applied to monitoring and control of various manipulators.

• Laser Solutions
• /
• v.13 no.2
• /
• pp.17-23
• /
• 2010

It is very important to track a complicate weld seam for the welding automation. Very recently, laser vision sensor becomes a useful sensing tool to find the seams. Until now, however studies of welding automation using a laser vision sensor, focused on either image processing or feature recognition from CCD camera. Even though it is possible to use a simple algorithm for tracking a simple seam, it is extremely difficult to develop a seam-tracking algorithm when the seam is more complex. To overcome these difficulties, this study introduces a simulation system to develop the seam tracking algorithm. This method was verified experimentally to reduce the time and effort to develop the seam tracking algorithm, and to implement the sensing device.