• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.307-314
• /
• 2003

In the general multiple video object coder, more interested objects such as speaker or moving object is consistently coded with higher priority. Since the priority of each object may not be fixed in the whole sequence and be variable on frame basis, it must be adjusted in a frame. In this paper, we analyze the independent rate control algorithm and global algorithm that the QP value is controled by the static parameters, object importance or priority, target PSNR, weighted distortion. The priority among static parameters is analyzed and adjusted into dynamic parameters according to the visual interests or importance obtained by camera interface. Target PSNR and weighted distortion are proportionally derived by using magnitude, motion, and distortion. We apply those parameters for the weighted distortion control and the priority-based control resulting in the efficient bit-rate distribution. As results of this paper, we achieved that fewer bits are allocated for video objects which has less importance and more bits for those which has higher visual importance. The duration of stability in the visual quality is reduced to less than 15 frames of the coded sequence. In the aspect of PSNR, the proposed scheme shows higher quality of more than 2d13 against the conventional schemes. Thus the coding scheme interfaced to human- eye proves an efficient video coder dealing with the multiple number of video objects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.301-307
• /
• 2002

Direct bonded SOI wafer pairs with $Si ll SiO_2/Si_3N_4 ll Si$ the heterogeneous insulating layers of SiO$_2$-Si$_3$N$_4$are able to apply to the micropumps and MEMS applications. Direct bonding should be executed at low temperature to avoid the warpage of the wafer pairs and inter-diffusion of materials at the interface. 10 cm diameter 2000 ${\AA}-SiO_2/Si(100}$ and 560 $\AA$- ${\AA}-Si_3N_4/Si(100}$ wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were pre- mated with facing the mirror planes by a specially designed aligner in class-100 clean room immediately. We employed a heat treatment equipment so called fast linear annealing(FLA) with a halogen lamp to enhance the bonding of pre mated wafers We kept the scan velocity of 0.08 mm/sec, which implied bonding process time of 125 sec/wafer pairs, by varying the heat input at the range of 320~550 W. We measured the bonding area by using the infrared camera and the bonding strength by the razor blade clack opening method, respective1y. It was confirmed that the bonding area was between 80% and to 95% as FLA heat input increased. The bonding strength became the equal of $1000^{\circ}C$ heat treated $Si ll SiO_2/Si_3N_4 ll Si$ pair by an electric furnace. Bonding strength increased to 2500 mJ/$\textrm{m}^2$as heat input increased, which is identical value of annealing at $1000^{\circ}C$-2 hr with an electric furnace. Our results implies that we obtained the enough bonding strength using the FLA, in less process time of 125 seconds and at lowed annealing temperature of $400^{\circ}C$, comparing with the conventional electric furnace annealing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.271-279
• /
• 2014

In this paper, the two design techniques of the embedded system which provides a wireless image observation with temporary ad-hoc network are proposed and developed. The first method is based on the embedded system design technique for a nearly real-time wireless short observation application, having a specific remote monitoring node with a built-in image processing function, and having the maximum rate of 1 fps (frame per second) wireless image transmission capability of a $160{\times}128$size image. The second technique uses the embedded system for a general wireless long observation application, consisting of the main node, the remote monitoring node, and the system controller with built-in image processing function, and the capability of the wireless image transmission rate of 1/3 fps. The proposed system uses the wireless ad-hoc network which is widely accepted as a short range, low power, and bidirectional digital communication, the hardware are consisted of the general developed modules, a small digital camera, and a PC, and the embedded software based upon the Zigbee stack and the user interface software are developed and tested on the implemented module. The wireless environment analysis and the performance results are presented.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.67-75
• /
• 2022

Medical information is variously generated not only from medical devices but also from electronic devices. Recently, related convergence technologies from big data collection in healthcare to medical AI products for patient's condition analysis are rapidly increasing. However, there are difficulties in applying them because of independent developmental procedures. In this paper, we propose an intelligent hospital information system (iHIS) model to simplify and integrate research, development and application of medical AI technology. The proposed model includes (1) real-time patient data management, (2) specialized data management for medical AI development, and (3) real-time monitoring for patient. Using this, real-time biometric data collection and medical AI specialized data generation from patient monitoring devices, as well as specific AI applications of camera-based patient gait analysis and brain MRA-based cerebrovascular disease analysis will be introduced. Based on the proposed model, it is expected that it will be used to improve the HIS by increasing security of data management and improving practical use through consistent interface platformization.

• Science of Emotion and Sensibility
• /
• v.25 no.3
• /
• pp.3-14
• /
• 2022

With the increase of video conferencing users and the development of technology, the situations where video conferencing is used and the layout of video conferencing interfaces are diversifying. Social anxiety affects video conferencing communication and is closely related to the self-view function, which is characteristic of video conferencing. The self-view function is part of the video conferencing interface that provides a small preview of one's own camera feed. Self-view is known to degrade work performance and cause fatigue; however, it is set as the default function on video conferencing software in a way that users generally prefer. This study used an online survey to study the effect of task orientation, preferred self-view size, and social anxiety on video feedback preference. Participants responded to questions assessing work orientation, social anxiety level, preferred self-view size, and self-view preference. The results showed that preferred self-view size mediates task orientation and video feedback preference. There was no significant difference in the mediating effect of the preferred self-view size according to the degree of social anxiety. These results offer insights into the interactions between users and video conferencing software and provide information that can be useful for designing video conferencing interfaces.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.9-20
• /
• 2009

Navigation system providing route-guidance and traffic information is one of the most widely used driver-support system these days. Most of the navigation system is based on the 2D map paradigm so the information is ed and encoded from the real world. As a result it imposes a cognitive burden to the driver to interpret and translate the ed information to real world information. As a new concept of navigation system, augmented-reality navigation system (AR navigation) is suggested recently. It provides navigational guidance by imposing graphical information on real image captured by camera mounted on a vehicle in real-time. The ultimate goal of navigation system is to assist the driving task with least driving workload whether it is based on the abstracted graphic paradigm or realistic image paradigm. In this paper, we describe the comparative studies on how map navigation and AR navigation affect for driving tasks by experimental research. From the result of this research we obtained a basic knowledge about the two paradigms of navigation systems. On the basis of this knowledge, we are going to find the optimal design of navigation system supporting driving task most effectively, by analyzing characteristics of driving tasks and navigational information from the human-vehicle interface point of view.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.861-866
• /
• 2023

Individuals with visual impairments face difficulties in accessing accurate information about medical services and medications, making it challenging for them to ensure proper medication intake. While there are healthcare laws addressing this issue, there is a lack of standardized solutions, and not all over-the-counter medications are covered. Therefore, we have undertaken the design of a mobile application that utilizes image recognition technology, barcode scanning, and QR code recognition to provide guidance on how to take over-the-counter medications, filling the existing gaps in the knowledge of visually impaired individuals. Currently available applications for individuals with visual impairments allow them to access information about medications. However, they still require the user to remember which specific medication they are taking, posing a significant challenge. In this research, we are optimizing the camera capture environment, user interface (UI), and user experience (UX) screens for image recognition, ensuring greater accessibility and convenience for visually impaired individuals. By implementing the findings from our research into the application, we aim to assist visually impaired individuals in acquiring the correct methods for taking over-the-counter medications.