• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5990-6008
• /
• 2019

Recognizing license plate from its traffic camera captured images is one of the most important aspects in many traffic management systems. Despite many sophisticated license plate recognition related algorithms available online, license plate recognition is still a hot research issue because license plates in each country all round the world lack of uniform format and their camera captured images are often affected by multiple adverse factors, such as low resolution, poor illumination effects, installation problem etc. A novel method is proposed in this paper to solve the inclination problem of license plates in their camera captured images through four parts: Firstly, special edge pixels of license plate are chosen to represent main information of license plates. Secondly, least square methods are used to compute the inclined angle of license plates. Then, coordinate rotation methods are used to rotate the license plate. At last, bilinear interpolation methods are used to improve the performance of license plate rotation. Several experimental results demonstrated that our proposed method can solve the inclination problem about license plate in visual aspect and can improve the recognition rate when used as the image preprocessing method.

• Journal of Korea Game Society
• /
• v.11 no.2
• /
• pp.105-114
• /
• 2011

In a game such as MMORPG, players often see occlusions between primary actors in a shot where shows a close quarter combat. This paper proposes an occlusion resolution technique(MOS) by grafting a medium shot technique and an over-shoulder shot technique to strengthen a confrontation structure. A medium shot technique sets 4 reference points at the up/down/left/right on the sphere of target. An over-shoulder shot technique is a technique of locating the reference points on the side variably. An occluder is replaced with 2 spheres. If a ray is emitted to a reference point from the camera point and intersects a sphere of occluder, it becomes a potential occlusion state. If so, we start to move the camera to the right or left of the occluder, keep moving it while new position of camera is in potential occlusion state, and stop its movement when the occlusion is resolved. Our experiments show that MOS technique consumes operational time of $13.7{\mu}s$ per shot on average, and that it resolves occlusions in 9.26% of ratio on average, and so doesn't have any effect on viewer's sight.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.667-670
• /
• 2005

As security and surveillance have become the center of interest, remote controlled CCTV(Closed-Circuit Television) market has been formed while rapid development of digital image compression technology and Internet triggered the advent of web cameras. The characteristic of web camera is that it can provide users with higher quality image than CCTV at any place where Internet access is available. However, As for the system administrator, the existing web camera have disadvantage in that they allows users only. who are connected to the server of the web camera, to see the image from it. In this paper, in order to make up for this defect, designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.65-77
• /
• 2008

The color reproduction of digital still camera does not, in general, match those of the final prints. Because color gamut of these devices is different, it is therefore necessary to take account of a way to match. The way uses the optimized profile to print an image. This paper proposed a way to create the input profile of digital still camera for standardization printing process. The results of proposed way showed that for input profiles equivalent, good results relatively. In this paper, an experiment was done where the illumination sources used as the standard illumination 5200K and illuminated at a $45^{\circ}$ angle in the best illumination efficiently. The white balance was in mode 'custom': aperture F11, exposure time 1/60s, ISO50, focal length 80mm. The images were exported and saved as 16bit RGB tiff(AdobeRGB, sRGB, ProphotoRGB) images. To do the test, the RGB values of the RGB tiff images are processed through the ICC input profile to arrive at processed $CIEL^*a^*b^*$ values. A profiling tool such as ProfileMaker 5.0 and Monacoprofile 4.8 are used to do this. The processed CIEL*a*b* values are compared to the reference CIEL*a*b* values and these two values are used to calculate a ${\Delta}E$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.525-534
• /
• 2018

Camera calibration is the process of determining the parameters such as the focal length of a camera, the position of a principal point, and lens distortions. For this purpose, images of checkerboard have been mainly used. When targets were automatically recognized in checkerboard image, the existing studies had limitations in that the user should have a good understanding of the input parameters for recognizing the target or that all checkerboard should appear in the image. In this study, a methodology for automatic target recognition was proposed. In this method, even if only a part of the checkerboard image was captured using rectangles including eight blobs, four each at the central portion and the outer portion of the checkerboard, the index of the target can be automatically assigned. In addition, there is no need for input parameters. In this study, three conditions were used to automatically extract the center point of the checkerboard target: the distortion of black and white pattern, the frequency of edge change, and the ratio of black and white pixels. Also, the direction and numbering of the checkerboard targets were made with blobs. Through experiments on two types of checkerboards, it was possible to automatically recognize checkerboard targets within a minute for 36 images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.637-644
• /
• 2021

In general, in the fields of computer vision, robotics, and augmented reality, the importance of 3D space and 3D object detection and recognition technology has emerged. In particular, since it is possible to acquire RGB images and depth images in real time through an image sensor using Microsoft Kinect method, many changes have been made to object detection, tracking and recognition studies. In this paper, we propose a method to improve the quality of 3D reconstructed images by processing images acquired through a depth-based (RGB-Depth) camera on a multi-view camera system. In this paper, a method of removing noise outside an object by applying a mask acquired from a color image and a method of applying a combined filtering operation to obtain the difference in depth information between pixels inside the object is proposed. Through each experiment result, it was confirmed that the proposed method can effectively remove noise and improve the quality of 3D reconstructed image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.89-98
• /
• 2005

Fingerprint segmentation and ridge orientation estimation algorithms with images from a mobile camera are proposed. The fingerprint images from a mobile camera are quite different from those from conventional sensor, called touch based sensor such as optical, capacitive, and thermal. For example, the images from a mobile camera are colored and the backgrounds or non-finger regions are very erratic depending on how the image capture time and place. Also the contrast between ridge and valley of a mobile camera image are lower than that of touch based sensor image. To segment fingerprint region, we first detect the initial region using color information and texture information. The LUT (Look Up Table) is used to model the color distribution of fingerprint images using manually segmented images and frequency information is extracted to discriminate between in focused fingerprint regions and out of focused background regions. With the detected initial region, the region growing algerian is executed to segment final fingerprint region. In fingerprint orientation estimation, the problem of gradient based method is very sensitive to outlier that occurred by scar and camera noise. To solve this problem, we propose a robust regression method that removes the outlier iteratively and effectively. In the experiments, we evaluated the result of the proposed fingerprint segmentation algerian using 600 manually segmented images and compared the orientation algorithms in terms of recognition accuracy.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.73-82
• /
• 2021

According to the government's announcement of the safety management enhancement policy for small and medium-sized private construction sites, the subject of mandatory CCTV installation has been expanded from large construction sites to small and medium-sized construction sites. However, since the existing CCTV at construction sites has been used for simple control for safety management, so research is needed for monitoring of construction sites. Therefore, in this study, three vanishing points were calculated based on a single image taken with a monocular camera, and then a camera matrix containing interior orientation parameters information was determined. And the accuracy was verified by calculating the height of the target object from the height of the reference object. Through height determination experiments using vanishing points based on a monocular camera, it was possible to determine the height of target objects only with a single image without separately surveying of ground control points. As a result of the accuracy evaluation, the root mean square error was ±0.161m. Therefore, it is determined that the progress of construction work at the construction sites can be monitored through the single image taken using the single camera.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.10-20
• /
• 2008

Generally, to acquire an HDR image, many images that cover the entire dynamic range of the scene with different exposure times are required, then these images are fused into one HDR image. This paper proposes an efficient method for the HDR image acquisition with small number of images. First, we estimated scenic dynamic range using two images with different exposure times. These two images contain the upper and lower limit of the scenic dynamic range. Independently of the scene, according to varied exposure times, similar characteristics for both the maximum gray levels in images that include the upper limit and the minimum gray levels in images that include the lower limit are identified. After modeling these characteristics, the scenic dynamic range is estimated using the modeling results. This estimated scenic dynamic range is then used to select the proper exposure times for the acquisition of an HDR image. We selected only three proper exposure times because entire dynamic range of the cameras could be covered by three dynamic range of the cameras with different exposure times. To evaluate the error of the HDR image, experiments using virtual digital camera images were carried out. For several test images, the error of the HDR image using proposed method was comparable to that of the HDR image which utilize more than ten images for the HDR image acquisition.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.127-134
• /
• 2003

In this paper, the speed control problem of moving camera is investigated for tracking the movement of the human-face. The camera system with pan-tilt mechanism sends an image to PC and PC sends back tracking coordinate to the camera. Then the camera tracks a human face in real time. The speed of the stepping motors for moving the camera must be controlled to the target region fast enough and smoothly, In this paper, a fuzzy logic controller is proposed for driving step motors. By creating driving acceleration and deceleration speed Profile, the speed of the motors is controled fast and smoothly. Experiments are performed to show the effectiveness of the proposed method.