• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.74-82
• /
• 2004

Planar laser-induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Acetone PLIF is chosen because fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone PLIF is applied to measure quantitative air excess ratio distribution in an engine fueled with LPG. Acetone is excited by KrF excimer laser (248nm) and its fluorescence image is acquired by ICCD camera with a cut-off filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile is suggested. Raw images are divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which is taken by a calibration process, are converted to air excess ratio distribution. This investigation shows instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• Smart Media Journal
• /
• v.7 no.2
• /
• pp.23-33
• /
• 2018

A musical sheet is read by optical music recognition (OMR) systems that automatically recognize and reconstruct the read data to convert them into a machine-readable format such as XML so that the music can be played. This process, however, is very challenging due to the large variety of musical styles, symbol notation, and other distortions. In this paper, we present a model for the recognition of musical symbols through the use of a mobile application, whereby a camera is used to capture the input image; therefore, additional difficulties arise due to variations of the illumination and distortions. For our proposed model, we first generate a line adjacency graph (LAG) to remove the staff lines and to perform primitive detection. After symbol segmentation using the primitive information, we use a covariance-matching method to estimate the similarity between every symbol and pre-defined templates. This method generates the three hypotheses with the highest scores for likelihood measurement. We also add a global consistency (time measurements) to verify the three hypotheses in accordance with the structure of the musical sheets; one of the three hypotheses is chosen through a final decision. The results of the experiment show that our proposed method leads to promising results.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.57-63
• /
• 2017

The most important, essential prerequisite for the improvement of vehicle license plate recognition is the acquisition of high-quality vehicle images. Because typical images acquired from roads are affected by different environmental factors including the time of day, sunlight, and the weather, the brightness and the shape of the license plates in the images are inconsistent. To this end, many image corrections are performed, resulting in slower recognition and lower recognition rate. Therefore, in this study, we used the images acquired from roads to test the proposed method for fast capturing of vivid, high-quality vehicle images by measuring the brightness around license plates during real-time image capturing to control in real time the factors, such as shutter speed, brightness, and gain of the camera, that affect the brightness and the quality of the images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.901-906
• /
• 2006

In this paper, we describe the implementation of the digital photo frame system that displays the images coming through the memory card of a digital camera. Each image can be recorded with voice in this system, and a function of the mp3 player is implemented as well. We use Intel PXA255 to control the system and modify the bootloader and linux kernel. Also we adapt device driver for this system. For the realization of image display, voice recording and mp3 playing in the basis of the linux system, we program some of the Microwindows system configuration files and program applications here. This study will be a good example to access the development of the digital photo frame based on the linux system using less-power and high performed embedded processor.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.885-888
• /
• 2018

This paper researches a way of detecting fish robots moving in an aquarium. The fish robot was designed and developed for interactions with humans in aquariums. It was studied merely to detect a moving object in an aquarium because we need to find the positions of moving fish robots. The intention is to recognize the location of robotic fish using an image processing technique and a video camera. This method is used to obtain the velocity for each pixel in an image, and assumes a constant velocity in each video frame to obtain positions of fish robots by comparing sequential video frames. By using this positional data, we compute the distance between fish robots using a mathematical expression, and determine which fish robot is leading and which one is lagging. Then, the lead robot will wait for the lagging robot until it reaches the lead robot. The process runs continuously. This system is exhibited in the Busan Science Museum, satisfying a performance test of this algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.543-544
• /
• 2006

This paper describes a simple real-time monitoring system for use in measurement subsystem of contact wire and geometry of overhead contact wire in electric railway. The system has been consists of a high speed CMOS camera with resolution $1024\;{\times}\;1280$ pixels, line type laser source with a power equal to 300 mW, and PC-based image acquisition system with PCI Express slot. National instrument LabVIEW (8.0) and vision acquisition software have been used in application programming interface for image acquisition, display, and storage with a frequency of sampling of 500 acquisitions per second.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.5-10
• /
• 2006

The purpose of this study is to measure the droplet distribution and Sauter mean diameter(SMD) of biodiesel fuel, using the immersion sampling method. This method involves using an optical microscope and a CCD camera, to take an image of the droplets. These images are then measured by using a 'Sigma Scan' processing program. The results of the above experiment are summarized as followed ; (1) There can be as much as a 10% error rate when measuring the diameter of these droplets, using the image processing method and the naked eye. (2) The result of droplet size distribution test, TVO(transesterified vegetable oil) big size droplet distribution were increased at ambient pressure $6kg/cm^2$. (3) When ambient pressure increased $6kg/cm^2$ above, SMD variation of TVO and UVO(used vegetable oil) 30 are small. (4) On Rosin-Rammler analysis, droplets size distribution of UVO(used vegetable oil) 30 uniform more than TVO 20 on ambient pressure $1kg/cm^2$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.47-55
• /
• 1990

This paper presents experimental results which explore the capability of a CW laser speckle photography for tile measurement of in-plane displacement at high temperature. The serious restrictions on the application of the method seem to be the ambient air turbulence and the change of surface texture caused by the oxidation, as they tend to decorrelate the double exposured speckle patterns. In order to assess only the effect of air turbulence, a ceramics-coated stainless steel plate is heated in air and Ar-laser specklegrams are made with combination of temperature and lateral translation displacement. The slight reduction in visibility of Young's fringes is observed at $1000^{\circ}C$. The analyses of Young's fringes are carried out by a image processing system using a TV-camera and computers, and the result agrees well with the micrometer reading. Futhermore, uncoated stainless steel and Hastelloy X plates are tested and the effect of oxidation is also evaluated. The experimental results demonstrate that a CW laser speckle photography is applicable at temperatures up to $1000^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.349-354
• /
• 2005

The study on computer vision is aimed on creating a system to substitute the ability of human visual sensor. Especially, moving object tracking system is becoming an important area of study. In this study, we have proposed the tracking system of single moving object based on motion estimation. The tracking system performed motion estimation using differential image, and then tracked the moving object by controlling Pan/Tilt device of camera. Proposed tracking system is devided into image acquisition and preprocessing phase, motion estimation phase and object tracking phase. As a result of experiment, motion of moving object can be estimated. The result of tracking, object was not lost and tracked correctly.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1354-1357
• /
• 2015

In this paper, the designed fish robot is researched and developed for aquarium underwater robot. This paper is a study on how the outside technology merely to find the location of fish robots without specific sensor or internal devices for these fish robot. The model of the fish is designed to detect the position of the optical flow of the Robotic Fish in the Simulink through Matlab. This paper intends to recognize the shape of the tank via a video device such as a camera or camcorder using an image processing technique to identify the location of the robotic fish. Here, we are applied to the image comparing algorithm by using the average color weight algorithm method. In this, position coordinate system is used to find the position coordinates of the fish to identify the position of the Robotic fish. It was verified by the performance test of design robot.