• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.295-295
• /
• 2000

In this paper, the measurement algorithm of PCB alignment error is developed using image processing. The X-Y-$\theta$ table correcting PCB alignment error is driven by drive module based on microprocessor according to calculation results obtained through image processing procedure. In order to recognize the X-Y-$\theta$ position errors, two fiducial points are marked on PCB and two cameras of ultraviolet rays types are used for detection of the points to capture exactly fiducial points under disturbance of illumination change. Through application for a practical screen printer, the precision control using the developed position control system can be realized about 2.5${\mu}{\textrm}{m}$ in table moving range and 8${\mu}{\textrm}{m}$ in camera processing precision.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.25-34
• /
• 1999

In this paper, an algorithm is presented to recognize lane and obstacles based on highway road image. The road images obtained by a video camera undergoes a pre-processing that includes filtering, edge detection, and identification of lanes. After this pre-processing, a part of image is grouped into 27 sub-windows and fed into a three-layer feed-forward neural network. The neural network is trained to indicate the road direction and the presence of absence of an obstacle. The proposed algorithm has been tested with the images different from the training images, and demonstrated its efficacy for recognizing lane and obstacles. Based on the test results, it can be said that the algorithm successfully combines the traditional image processing and the neural network principles towards a simpler and more efficient driver warning of assistance system

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.314-319
• /
• 2000

The working surface of a flexible grinding disk was characterized by means of an image processing, in which a picture of a disk surface was taken by the CCD camera and analyzed with the personal computer. As process conditions, depth of cut was changed to be 2 and 4 mm. From the captured image circles marked on the disk was regenerated using the edges detected with scale space filtering. In order to correlate the level of deformation to the distortion of the circles, intervals between each circle have been analyzed. Notable correlation has been observed between the intervals and the process conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.96-104
• /
• 2003

To assess tunnel safety, cracks in tunnel lining are measured by inspectors who observe cracks with their eyes. A manual inspection is, however, slow and subjective. This paper, therefore, proposes vision-based inspection system for measuring cracks in the tunnel lining that inspects cracks fast and objective. The system is consisted of an on-vehicle system and a lab system. An on-vehicle system acquires image data with line CCD camera. A lab system extracts crack then inform their thickness, length and orientation by using image processing. To improve accuracy of crack recognition the geometric properties of a crack was applied to image processing. The proposed system were verified with experiments in both laboratory and field environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.184-193
• /
• 2014

Machine vision systems is applied for various industries such as optimize your spending, automate your production and maximize your efficiency. This research is effective for most optimal light condition of machine vision that technology was applied bald outside human visual acuity. Image processing converts a target image captured by a CCD camera into a digital signal and then performs various arithmetic operations on the signal to extract the characteristics of the target, such as points, lines, circles, area and length. The mathematical concepts of convolution and the kernel matrix are used to apply filters to signals, to perform functions such as extracting edges and reducing unwanted noise. This research analyze and compares matching ratio with reference image and search for optimal lighting condition in accuracy that user wants coming input image according to brightness change of lighting.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.385-392
• /
• 2013

An uncalibrated visual servo control method for tracking a target is presented. We define the robot-positioning problem as an unconstrained optimization problem to minimize the image error between the target feature and the robot end-effector feature. We propose a method to find the residual term for more precise modeling using the secant approximation method. The composite image Jacobian is estimated by the proper method for eye-to-hand configuration without knowledge of the kinematic structure, imaging geometry and intrinsic parameter of camera. This method is independent of the motion of a target feature. The algorithm for regulation of the joint velocity for safety and stability is presented using the cost function. Adaptive regulation for visibility constraints is proposed using the adaptive parameter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.465-472
• /
• 2009

This paper proposes a multimodal information transformation system that converts the image information to the voice information to provide the sight impaired people with walking area and obstacles, which are extracted by an acquired image from a single CCD camera. Using a chain-code line detection algorithm, the walking area is found from the vanishing point and boundary of a sidewalk on the edge image. And obstacles are detected by Gabor filter of extracting vertical lines on the walking area. The proposed system expresses the voice information of pre-defined sentences, consisting of template words which mean walking area and obstacles. The multi-modal information transformation system serves the useful voice information to the sight impaired that intend to reach their destination. The experiments of the proposed algorithm has been implemented on the indoor and outdoor environments, and verified its superiority to exactly provide walking parameters sentences.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.685-688
• /
• 2000

In this paper, we used image information for the enhancement of Korean numeral speech recognition. First, a noisy environment was made by Gaussian generator at each 10 dB level and the generated signal was added to original Korean numeral speech. And then, the speech was analyzed to recognize Korean numeral speech. Speech through microphone was pre-emphasized with 0.95, Hamming window, autocorrelation and LPC analysis was used. Second, the image obtained by camera, was converted to gray level, autocorrelated, and analyzed using LPC algorithm, to which was applied in speech analysis, Finally, the Korean numerial speech recognition with image information was more ehnanced than speech-only, especially in ‘3’, ‘5’and ‘9’. As the same LPC algorithm and simple image management was used, additional computation a1gorithm like a filtering was not used, a total speech recognition algorithm was made simple.

• The Journal of Bigdata
• /
• v.1 no.1
• /
• pp.19-22
• /
• 2016

Many Studies have been actively conducted on the early diagnosis of the crop pest utilizing IT technology. The purpose of the paper is to discuss on the image processing method capable of detecting the crop leaf pest prematurely by analyzing the image of the leaf received from the camera sensor. This paper proposes an algorithm of diagnosing leaf infection by utilizing an improved K means clustering method. Leaf infection grouping test showed that the proposed algorithm illustrated a better performance in the qualitative evaluation.