• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.299-305
• /
• 2005

This study was developed image processing algorithm for recognition of few teats of a cow in the image using black and white camera attached with infrared filter. Spectroscopic analysis was used for selection of a NIR filter to separate teats from udder skin in the image captured. To verify the performance of image processing algorithm was developed and NIR filter was selected, carried out an experiment with cows. NIR band-pass filter was used to pass the 975nm band of light spectrum. The image processing algorithm was developed could recognize all teats and the process time was 0.9 second to recognize the all teats and to acquire end position of teats.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.594-599
• /
• 2008

Image data produced from ADD water-tunnel test are currently analyzed manually. The accuracy and elapsed time of this process can be determined by observers. In this paper, the algorithm based on MATLAB for improved image data processing and analysis is proposed. This algorithm consists of camera calibration, gray-level transformation, noise filtering and binarization in image preprocessing, vortex trajectory measurement in image analysis. Experimental results show that the proposed algorithm has better accuracy and execution speed than those of the existing methods.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.772-776
• /
• 2006

A research about facial image recognition is studied in the most of images in a full race. A representative part, effecting a facial image recognition, is eyes and a mouth. So, facial image recognition researchers have studied under the central eyes, eyebrows, and mouths on the facial images. But most people in front of a camera in everyday life are difficult to recognize a fast change of pupils. And people wear glasses. So, in this paper, we try using Principal Component Analysis(PCA) for facial image recognition in blindfold case.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1222-1225
• /
• 2018

This paper proposes an image detection algorithm to implement gesture. By using a camera sensor, the performance of the extracted image algorithm based on the gesture pattern was verified through experiments. In addition, through the experiments, we confirmed the proposed method's possibility of the implementation. For efficient image detection, we applied a segmentation technique based on image transition which divides into small units. To improve gesture recognition, the proposed method not only has high recognition rate and low false acceptance rate in real gesture environment, but also designed an algorithm that efficiently finds optimal thresholds that can be applied.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.71-75
• /
• 2018

Image enhancement is a necessary end essential step after taking a picture with a digital camera. Many different photo software packages attempt to automate this process with various auto enhancement techniques. This paper provides and implements a system that can learn a user's preferences and apply the preferences into the process of image enhancement. Five major components are applied to the implemented system, which are computing a distance metric, finding a training set, finding an optimal parameter set, training and finally enhancing the input image. To estimate the validity of the method, we carried out user studies, and the fact that the implemented system was preferred over the method without learning user preferences.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.3
• /
• pp.133-142
• /
• 2019

The existing auxiliary communicating aids for the hearing-impaired have an inconvenience of using additional expensive sensing devices. This paper presents a hand image detection based algorithm to interpret the sign language of the hearing-impaired. The proposed sign language recognition system exploits the hand image only captured by the camera without using any additional gloves with extra sensors. Based on the hand image processing, the system can perfectly classify several numeric sign language representations. This work proposes a simple lightweight classification algorithm to identify the hand image of the hearing-impaired to communicate with others even further in an environment of complex background. Experimental results show that the proposed system can interpret the numeric sign language quite well with an accuracy of 95.6% on average.

• Current Optics and Photonics
• /
• v.6 no.3
• /
• pp.304-312
• /
• 2022

Digital images of cultural relics captured using line scan cameras present limitations due to uneven intensity and low contrast. To address this issue, this report proposes a colour linear array image enhancement method that can maintain a constant colour. First, the colour linear array image is converted from the red-green-blue (RGB) colour space into the hue-saturation-intensity colour space, and the three components of hue, saturation, and intensity are separated. Subsequently, the hue and saturation components are held constant while the intensity component is processed using the established intensity compensation model to eliminate the uneven intensity of the image. On this basis, the contrast of the intensity component is enhanced using an improved local contrast enhancement method. Finally, the processed image is converted into the RGB colour space. The experimental results indicate that the proposed method can significantly improve the visual effect of colour linear array images. Moreover, the objective quality evaluation parameters are improved compared to those determined using existing methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.124-133
• /
• 1994

Many of non-contact measuring systems are used to estimate surface characteristics owing to their advantages of high speed and undanaged test. In this paper, a new measuring system is proposed to acquire image from CCD camera through back light illumination. Lowpass filter is very useful in view of noise removal and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. Laplacian operator is used to detect workpiece edge from binary image. In case of image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient for coordinate of pixel which edge is composed of. In summary, the work is concerned with the development of a new technique for roughness measurement by the image processing in turning.

• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.396-406
• /
• 2006

This paper proposes an omni-directional image generation algorithm with parametric image compensation. The algorithm generates an omni-directional image by transforming each planar image to the spherical image on spherical coordinate. Parametric image compensation method is presented in order to compensate vignetting and illumination distortions caused by properties of a camera system and lighting condition. The proposed algorithm can generates realistic and seamless omni-directional video and synthesize any point of view from the stitched omni-directional image on the spherical image. Experimental results show that the proposed omni-directional system with vignetting and illumination compensation is approximately $1{\sim}4dB$ better than that which does not consider the said effects.

• Journal of Korea Water Resources Association
• /
• v.41 no.7
• /
• pp.701-709
• /
• 2008

Surface Image Velocimetry (SIV) is an instrument to measure water surface velocity by using image processing techniques. It gives us one of the easiest ways to measure water velocity. However, since it requires a set of plane survey data to estimate the velocity, it may give us some kind of misconcept that its usage would be difficult or cumbersome in spite of its handiness. If it has a feature that can estimate the plane survey data easily, it may be treated as like one of the conventional propeller velocimetries and its applicability would be improved so high. The present study is to propose a method to estimate the plane geometry of the physical coordinate with a calibrated camera. With the feature we can half-automatize the estimating procedure for the whole water velocity field. Photogrammetric technique to calculate the plane coordinates of the reference points with a calibrated camera was studied, which has originally studied for long time in the field of computer vision. By applying this technique to SIV, it is possible to estimate the location of reference coordinates for projective transform without plane survey. With this procedure the cumbersome plane survey for the reference points is omitted. One example application of the developed method showed fairly good results with insignificant errors.