• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 춘계학술논문발표회 논문집
• /
• pp.325-329
• /
• 2011

오늘날 대부분의 화재조사의 기본 원칙은 숫자를 찾는 데 목적이 있고, 화재의 중요한 양상을 묘사할 수 있는 물리학적으로 정확한 경험식과 하나의 모델로 바꾸는 데 가치를 두고 있다. 화재는 일반적으로 화재 초기에 발생하는 열이 상호작용 과정에 의해 성장하며, 이 간단한 과정이 화재 성장률을 결정하며, 그 예측을 어렵게 한다. 그러므로 화재성장에서 대부분의 모델은 경험으로부터 정해지게 되는데, 그 모델은 매우 제한적이다. 콘칼로리미터는 특별히 노출된 부분에서 중요한 재료 특성의 변화 수치를 얻을 수 있으며, 측정기준은 발화, 질량손실률, 열 발생률, 연기 발생률, 가스 분석 등이며, 이 모든 측정은 테스트의 시작에서 끝날 때까지 실행되며, 이는 발화 전, 발화 후를 모두 포함한다. 국내외 콘칼로리미터의 연구를 비교, 분석하여 화재안전 데이터베이스 구축에 활용되는 콘 칼로리미터의 중요성 평가를 본 연구의 목적으로 한다.

• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.39-44
• /
• 2010

현재 열방출률을 측정하는 데 사용되고 있는 콘칼로리미터 법은 일정한 복사도 값을 가지고 실험한다. 하지만, 실물화재 시 가연물은 연소할 때 동일하지 않은 열선속을 방출한다. 본 연구에서는 일정 크기를 갖는 실내를 대상으로 FDS를 사용하여 실내 열선속 변화에 따른 연소특성을 분석하여 실내화재 시 온도 변화를 계산하여, 콘칼로리미터의 콘 히터에 유동적인 열선속을 적용하여 복사도에 반영하였다. 결과로 화재 성장기(Growth period) 및 감쇠기(Decline period)와 같은 복사도의 변화에 따라 실물화재에 근거한 PMMA의 열방출률을 얻을 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.1-8
• /
• 2008

This study was performed to evaluate the burning characteristics of wood-based materials and the effect of surface treatment of fire retardant using cone calorimeter. Four types of wood-based materials, such as Plywood, Oriented Strand Board (OSB), Particle Board (PB) and Medium Density Fiberboard (MDF), were tested at a constant heat flux of $50kW/m^2$ to investigate the time to ignition, mass loss rate, heat release rate, effective heat of combustion, etc. In addition, each type of wood-based material was tested at the same heat flux after fire retardant treatment on the surface to evaluate the effect of this treatment on the burning characteristics. The surface treatment of fire retardant, by the amount of $110g/m^2$, delayed the time to ignition almost twice. However, it was indicated that heat release rate, mass loss rate, and effective heat of combustion were not significantly affected by fire retardants treatment for all types of wood-based materials.

• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.47-54
• /
• 2010

본 연구에서는 창고 화재 사고의 위험성을 파악하기 위해서 중규모 실물 화재 실험 장비인 룸코너 시험기(Room Corner Tester)를 통해 구축된 단위 구성품의 화재 특성 DB를 바탕으로 화재에 취약할 것으로 판단되는 의류 창고를 실험 모델로 구성하여 실물 화재실험 장비인 라지 스케일 칼로리미터(Large Scale Calorimeter)에서 실물 화재실험을 실시하였다. 창고 모델의($3m{\times}3m{\times}2.4m$) 벽체는 불연등급의 그라스울과 일반 스티로폼 샌드위치 패널로 구성하였다. 실험결과 최대 열방출률은 그라스울 샌드위치 패널 창고모델에서 5MW, 스티로폼 샌드위치 패널 창고모델에서 11MW를 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.121-129
• /
• 2001

The semi-adiabatic temperature rise and the losses of temperature of cement paste, mortar and concrete were measured by an apparatus of semi-adiabatic temperature. Heat of hydration was measured by a conduction calorimeter and adiabatic temperature rise of concrete was measured by an adiabatic calorimeter. The derived equation which can assume the adiabatic temperature was proposed by measuring the semi-adiabatic temperature of concrete. The maximum adiabatic temperature rise of concrete obtained by the derived equation of adiabatic temperature, $T_{ad}(t)=T_{sad}(t)+T_{dis}(t)$, showed $55^{\circ}C$ approximately and it had good relation with the other one obtained by the heat of hydration of cement paste and with maximum value which was measured by the adiabatic calorimeter. The adiabatic temperature rise obtained by derived equation was a different information in comparison with the value obtained by adiabatic temperature rise equations by Hell and et. al. in early age, but it showed similar tendencies with the other one according to elapsed time. Adiabatic temperature rise of lich mix concrete with highly cement content was predicted. The adiabatic temperature rise of cement paste and mortar obtained by derived equation from us showed comparatively matching results to compared with that of obtained by adiabatic temperature equation from concrete standard specification.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.85-92
• /
• 1997

Flammability of non-flame-retardant and flame-retardant materials was studied by using cone calorimeter Also, relations between the results obtained by using cone calorimeter and those obtained by the flammability test of japanese fire Service Law were examined. The results are as follows: 1) The ignition time of the molten specimens is relatively long, whereas the ignition time of the non-molten specimens is short. None of remarkable difference of the ignition time has been found between non-flame-retardant and flame-retardant materials specimens. 2) The peak heat release rates of flame-retardant materials are smaller than those of non-flame- retardant materials. 3) The carbon monoxide and smoke evolved from flame-retardant materials generate much more than those evolved from non-flame-retardant materials. 4) Even if flame-retardant materials are passed by the flammability test of Japanese Fire Service Law, they burn easily under external radiative heating condition.

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.110-115
• /
• 2006

폴리우레탄에 인계 화합물을 첨가하여 폴리우레탄폼을 제조하였으며, 인계 화합물이 제조된 폴리우레탄폼의 기계적 물성과 난연성에 미치는 영향에 대하여 고찰하였다. 폴리우레탄과 인계 난연제인 Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP), Trimethyl phosphate(TMP) 각각을 약 $90^{\circ}C$에서 혼합시켜 혼합물로부터 제조된 경질 폴리우레탄폼에 대한 여러 실험을 통하여 기계적 물성뿐만 아니라 난연 효과도 상당히 향상됨을 확인하였다. Cone calorimeter를 이용하여 열방출율(heat release rate, HRR)을 측정하여 난연 첨가제의 함량에 따른 재료별 난연 특성을 평가하였다. 그리고 Scanning Electron Microscope(SEM)을 사용하여 난연제를 첨가하여 만든 폴리우레탄폼의 morphology를 관찰한 결과 순수한 폼과 마찬가지로 매우 균일한 형태의 cell 분포를 가짐을 확인하였다.

• 한국화재소방학회논문지
• /
• 제18권2호
• /
• pp.67-72
• /
• 2004

본 연구는 작업장의 건축물이나 구조물의 구성요소로 사용되어지는 섬유강화플라스틱의 연소특성을 평가하였다. 섬유강화플라스틱의 연소특성은 ISO 5660에 따라 콘칼로리미터를 사용하여 수행하였다. 섬유 강화플라스틱의 착화시간과 열방출율은 복사열과 난연제의 함량에 따라 달랐다. 섬유강화플라스틱의 열방출율은 복사열의 증가에 따라 증가하였다. 섬유강화플라스틱의 착화시간과 최대 열방출율을 이용하여 플래쉬오버(Flashover)의 가능성을 Petrella가 제시한 분류방법에 따라 검토하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.116-117
• /
• 2021

In general, when a building fire occurs, the heat flow rises by buoyancy, which affects the temperature rise of the ceiling. In addition, when the ceiling ignites, the fire spreads rapidly due to horizontal spread and radiant heat. According to the fire investigation, most of the large fires have a common characteristic that the fire spreads to the ceiling and causes many casualties. Therefore, it is considered that it is necessary to review the fire risk of ceiling materials used in buildings to prevent the spread of fire to the ceiling. Therefore, in this study, combustion characteristics such as the amount of heat released and ignition time of each SMC, DMC, and gypsum board were checked using a Cone Calorimeter, and the ignition temperature was calculated by substituting them into the fire theory. As a result, the ignition temperature of SMC was 449K, that of DMC was 1492K, and that of gypsum board was 677K.