• 한국토양비료학회지
• /
• 제41권1호
• /
• pp.50-54
• /
• 2008

근적외선스펙트로메타는 토양의 성분을 측정하는 새로운 기술로 발전하고 있다. 작물이 요구하는 토양의 인산 함량을 측정하는 데는 시간이 많이 소요되며, 침출액과 침출조건에 따라서 다르기 때문에 어려운 성분이다. 그러나 근적외선 방법을 이용하여 표준곡선을 정확하게만 만들어, 표준곡선 작성 시 Wiliams의 상관계수안내를 이용하면 상관계수의 수치에 따라서 토양의 총인산과 유효인산을 측정하는데 간편하게 이용할 수 있다. 또한 근적외 기술은 정밀도를 향상하면 포장 현지에서의 토양검정에도 쉽게 이용할 수 있는 쉬운 기술로 생각된다.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.56-64
• /
• 2006

This paper shows the development process of a straight-type five-hole pressure probe for measuring three-dimensional flow velocity components. The data reduction method using a bi-cubic curve-fitting program in a new calibration map was introduced in this study. This new calibration map can be applied up to the application angle, ${\pm}55^{\circ}$ of a probe. As a result, for the application angle of ${\pm}45^{\circ}$, an error for yaw and pitch angles appeared from $-1.76^{\circ}\;to\;1.83^{\circ}$ and from $-1.91^{\circ}\;to\;1.75^{\circ}$, respectively. Moreover, an error for a vector magnitude and a static pressure compared with a dynamic one showed from -7.83% to 4.87% and from -0.73 to 0.77, respectively. Even though this data reduction method showed unsatisfactory errors in a vector magnitude, it resulted in an easy and simple application method. Especially, when it was applied to an actual flow field including a swirling flow, a good result came out on the whole. However, in order to obtain a better result, it is thought that a more sophisticated interpolation method needs to be introduced.

• 한국음향학회지
• /
• 제25권5호
• /
• pp.246-256
• /
• 2006

평면파 반사 계수는 수중에서의 음파에너지에 관한 해저 바닥의 모든 정보를 담고 있고 음향 해석 모델의 입력 값으로도 사용할 수 있는 음향학적 물리량이다. 본 연구에서는 실험실 수조 환경에서 입자 매질 ( 세 종류의 유리구슬, 모래 )의 평면파 반사 계수, 음속 및 감쇠계수를 측정했다. 반사 실험은 수조의 한계를 고려해 $28{\sim}53^{\circ}$의 입사각과 중심 주파수 100kHz의 협대역 신호를 이용해 수행했다. 자기 교정법 (Self-calibration method)을 이용해 측정된 자료로부터 반사 계수를 계산했고 측정된 반사 계수의 경향 및 실험의 불확실성을 서술했다. 입자 매질의 음속 및 감쇠계수는 거리 수신 신호간의 회귀분석을 통해 계산했다. Biot 이론을 이용해 측정된 음속과 감쇠계수로부터 다공율과 침투율을 추정하고 실제 지질학적 측정값과의 유사성을 확인했다. 최종적으로 추정된 다공율, 침투율을 이용해 이론적 인 반사 계수를 계산하고 반사 실험의 측정값과 비교했다. 본 실험 결과는 Biot 이론으로 일관성 있게 입자 매질의 음향학적 물성을 설명할 수 있음을 입증한다.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.659-666
• /
• 2009

탑재체에 따른 위성의 임무가 다양하듯이, 적합한 검보정(Calibration & Validation)을 위한 작업은 탑재체에 따라 특정적인 요소를 가진다. SAR(Synthetic Aperture Radar) 위성의 경우에는 전파를 사용하여 물체를 인식하므로, 검보정을 위해서 특정한 형태로 전파를 반사하는 목표물을 지상에 설치하여야 한다. 또한 이 목표물은 설계된 위성궤도에서 지상목표물을 획득할 수 있도록 하여야한다. 상기의 목적을 달성하기 위해서는 우선적으로 검보정을 위한 사이트를 면밀히 분석하여야 한다. 여기에서는 상대방사보정(Relative Radiometric Calibration)과 절대방사 보정(Absolute Radiometric Calibration) 중에서 후자를 위한 반사기의 점표적 설치를 위해 적합한 검보정 사이트에 대한 고찰을 하였다.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.11-20
• /
• 2018

This study is to calibrate the SWAT (Soil and Water Assessment Tool) water quality of SS (Suspended Solid), T-P (Total Phosphorus), and T-N (Total Nitrogen) by focusing on 2014~2015 drought periods and identify the important parameters. For Gongdo watershed ($366.5km^2$), the SWAT was calibrated for 2 cases of 2002~2006 normal year focusing calibration and 2014~2015 drought focusing calibration respectively. The parameters of N_UPDIS (Nitrogen uptake distribution parameter) and CMN (Rate factor for humus mineralization of active organic nutrients) played important roles for T-N calibration during drought periods. The SWAT SS, T-N, and T-P average $R^2$ (Coefficient of determination) results by focusing on 2014~2015 drought periods calibration showed 0.71, 0.65 and 0.62 while 2002~2006 normal year focusing calibration showed 0.63, 0.58 and 0.50 respectively. Also SWAT SS, T-N, and T-P model efficiency NSE (Nash-Sutcliffe efficiency) results by focusing on drought period (2014~2015) calibrated showed 0.76, 0.77, 0.87 respectively. Even though the SS, T-P parameters were unchanged during the calibration, the SS and T-P results were improved by the hydrological parameters (SCS-CN, SOL_K, SLSOIL) during the drought periods. The SWAT water quality calibration needs to be considered for the movement of SS and nutrients transport especially focusing on the drought characteristics.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.178-184
• /
• 2012

BOD decay rate is a key parameter of BOD-DO models in streams and lakes. In the calibration of water quality modeling appropriate range of coefficient is required for guidance of parameter selection. In this study BOD decay rate was measured at 48 stream sites and 10 reservoir sites in 8 different river systems. The decay rate ranged from 0.09 to 0.25 $day^{-1}$ with a mean of 0.16 $day^{-1}$. Among river systems the decay rates showed significantly different ranges, with the Han River system showing higher values than other river systems. In comparing different types of water bodies, the decay rate was slightly higher in tributaries than in reservoirs and mainstreams. Our results can provide guidance to the selection of proper coefficient for various water bodies in the calibration of water quality models.

• 센서학회지
• /
• 제22권3호
• /
• pp.207-211
• /
• 2013

In this research, the pH sensor was developed using CNT nanosheet with Nafion coating for the advanced medical sensor such as a blood gas analyzer. The CNT nanosheet was formed by dielectrophoresis and water-meniscus between cantilever-type electrodes. Then, the process of the heat annealing and the Nafion coating was conducted for reducing contact resistance and giving proton selectivity respectively. We measured the response of the pH sensor as the electrolyte-gated CNT-nanosheet field effect transistor. The sensor showed a linear current ratio in a similar range of the normal blood pH. A calibration method for decreasing of the response variation among sensors has also been introduced. Coefficient of variance of the pH sensor was decreased by applying the calibration method. A linear relation between the calibrated response of the sensors and pH variance was also obtained. Finally, the pH sensor with a high resolution was fabricated and we verify the feasibility of the sensor by applying the calibration method.

• 소성∙가공
• /
• 제18권8호
• /
• pp.640-645
• /
• 2009

Recently, boss and rib test based on backward extrusion process was proposed to quantitatively evaluate the interfacial friction condition in bulk forming process. In this test, the tube-shaped punch with hole pressurizes the workpiece so that the boss and rib are formed along the hole and outer surface of the punch. It was experimentally and numerically revealed that the height of boss is higher than that of the rib under the severe friction condition. This work is focused on the effect of the punch design and flow stress on deformation pattern in boss and rib test. From the boss and rib test simulations, it was found that there is slight variation in both the heights of boss and rib according to the length of punch land, nose radius, and face angle. However the hole diameter of the punch and the clearance between the punch and die have a significant influence on the calibration curves showing the heights of the boss and rib. In addition, the effect of flow stress on the calibration curves was investigated through FE simulations. It was found that there is no effect of strength coefficient of the workpiece on the calibration curves for estimation of friction condition. On the other hand, the strain-hardening exponent of the workpiece has a significant influence on the calibration curve.

• 한국태양에너지학회 논문집
• /
• 제38권6호
• /
• pp.15-26
• /
• 2018

It is difficult to check the exact building energy consumption reduction such as when green remodeling of buildings, because it is due to outdoor air temperature over the years. And in Korea although Big Data of building energy consumption is collected and managed through "The Information System of the Building Energy and Greenhouse Gases" it is underutilized because of non calibration of outdoor air temperature change. Therefore, this study aims to develope calibration method of building energy consumption by outdoor air temperature according to micro climates, and building use types. As a result of analysis, Regression equations of Building energy consumption and $HDD_m/CDD_m$ are derived and calibration method is developed by Regression coefficient.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4104-4104
• /
• 2001

Milk somatic cell count (SCC) is a recognized indicator of cow health and milk quality. The potential of near infrared (NIR) spectroscopy in the region from 1100 to 2500nm to measure SCC content of cow milk was investigated. A total of 196 milk samples from 7 Holstein cows were collected for 28 days, consecutively, and analyzed for fat, protein, lactose and SCC. Three of the cows were healthy, and the rest had mastitis periods during the experiment. NIR transflectance milk spectra were obtained by the InfraAlyzer 500 spectrophotometer in a wavelength range from 1100 to 2500 nm. The calibration for logSCC was performed using partial least square (PLS) regression and different spectral data pretreatment. The best accuracy of determination was found for equation, obtained using smoothed absorbance data and 10 PLS factors. The standard error of calibration was 0.361, calibration coefficient of multiple correlation 0.868, standard error of prediction for independent validation set of samples 0.382, correlation coefficient 0.854 and the variation coefficient 7.63%. The accuracy of logSCC determination by NIR spectroscopy would allow health screening of cows, and differentiation between healthy and mastitic milk samples. When the spectral information was studied it has been found that SCC determination by NIR milk spectra was indirect and based on the related changes in milk composition. In the case of mastitis, when the disease occurred, the most significant factors that simultaneously influenced milk spectra were alteration of milk proteins and changes in ionic concentration of milk.