• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.274-286
• /
• 2016

This paper presents a 4-channel multi-rate vertical-cavity surface-emitting laser (VCSEL) driver. In order to keep the output power constant with respect to the process, voltage, temperature (PVT) variations, this research proposes automatic power and magnitude. For the fast settling time, the high-speed 10-bit time-interleaved Flash-successive approximation analog to digital converter (Flash-SAR ADC) is proposed and shared for automatic power and magnitude calibration to reduce the die area and power consumption. This chip is fabricated using $0.13-{\mu}m$ CMOS technology and the die area is $4.2mm^2$. The power consumption is 117.84 mW per channel from a 3.3 V supply voltage at 10 Gbps. The measured resolution of bias /modulation current for APC/AMC is 0.015 mA.

• 한국식품과학회지
• /
• 제26권5호
• /
• pp.579-584
• /
• 1994

기존의 노화도 측정법은 분석시간이 오래 걸리고 노동력이 많이 드는 단점이 있어 이를 개선하기 위해 신속 간편하고 비파괴적인 근적외선 분광분석법(NIR)을 노화도측정에 적용하였다. 밥을 $4^{\circ}C$에서 저장하면서 6시간 간격으로 시료를 채취한 후 동결 건조하여 분말화 한 것을 시료로 하여, 각기 다른 노화($0.0%{\sim}47.1%$)를 나타내는 시료들의 노화도를 NIR을 이용하여 추정하였다. 표준분석법으로는 기존의 분석방법인 glucoamylase를 이용한 효소적 방법에 의해 호화도를 측정하여 이로부터 노화도를 산출하였다. 일정 수분함량인 각 시료의 2차 미분 스펙트럼으로 부터 노화에 의한 흡수(吸收)띠의 변이는 1360, 1434, 1528, 1700, 1780, 1928. 2100, 2284, 2320 nm 영역에서 관찰되었다. 수분함량 5% 이하의 분말시료 32개를 사용하여 이의 2차 미분 스펙트럼으로 부터 노화도를 추정하기 위한 검량식을 구하였으며, 이때 상관계수는 0.9753, SEC는 3.64% 및 SEP는 3.91%를 나타내어 노화도측정을 위한 NIR의 적용 가능성을 보여주었다. 각기 다른 수분함량을 갖는 시료의 노화도 측정에 이 검량식을 적용할 경우 측정시료의 수분함량이 7.0%, 11.4%로 증가함에 따라 SEP와 bias가 증가하고 상관계수가 낮아져 NIR에 의한 노화도의 측정시에는 검량식의 작성에 사용된 5% 이하의 수분함량의 시료를 사용하여야 할 것으로 사료된다.

• 응용통계연구
• /
• 제34권3호
• /
• pp.427-438
• /
• 2021

이단추출은 개체와 집락 단수준별 모집단 특성을 함께 추정할 수 있게 해준다. 단위수준별 보조정보가 함께 주어질 때, 단위수준별 정보 및 가중치 구성을 통합적으로 고려한 칼리브레이션 가중치를 산출한다면 단위수준별 특성은 물론 수준간의 다변량적 특성도 적절히 반영할 수 있을 것이다. 본 연구는 Estevao와 Särndal (2006)과 Kim (2019)이 고려한 통합 칼리브레이션 가중치 산출 방법에 대해 살펴보았다. 간단한 모의실험을 통해 기존의 통합 칼리브레이션 가중치 산출방법의 효율성을 비교하였다. 이 중 복합보조정보를 개체화한 후 단일단계의 칼리브리이션 조정으로 가중치를 산출하되 집락가중치가 집락 내 개체가중치 평균이 되도록 정의하는 방법과 단위수준별 보조정보를 이용한 수준별 칼리브레이션 조정을 상호 반복적으로 수행하되 집락가중치가 집락 내 개체가중도치 평균이 되도록 하는 방법이 조정전 가중치의 변동량을 크게 늘리지 않고도 수준간 다변량적 특성을 잘 반영할 수 있음을 확인할 수 있었다. 집락과 개체의 상호간 보조정보에 대한 총합추정의 적합도 측면에서 매우 양호하였고, 칼리브레이션 조정에 포함되지 않는 조사특성들의 총합추정에 대한 상대편향 및 상대 평균 제곱근 오차가 작게 나타났다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.560-568
• /
• 2000

The aims of this research were to investigate the preprocessing effect of spectrum data on prediction performance and to develop a robust model to predict SSC in intact apple. Spectrum data of 320 Fuji apples were measured with the on-line transmittance measurement system at the wavelength range of 550∼1100nm. Preprocess methods adopted for the tests were Savitzky Golay, MSC, SNV, first derivative and OSC. Several combinations of those methods were applied to the raw spectrum data set to investigate the relative effect of each method on the performance of the calibration model. PLS method was used to regress the preprocessed data set and the SSCs of samples, and the cross-validation was to select the optimal number of PLS factors. Smoothing and scattering corection were essential in increasing the prediction performance of PLS regression model and the OSC contributed to reduction of the number of PLS factors. The first derivative resulted in unfavorable effect on the prediction performance. MSC and SNV showed similar effect. A robust calibration model could be developed by the preprocessing combination of Savitzky Golay smoothing, MSC and OSC, which resulted in SEP= 0.507, bias=0.032 and R$^2$=0.8823.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.815-823
• /
• 2012

Non-point source pollutants in down stream of Nakdong river were simulated by SWAT. GIS was utilized to make input data of SWAT such as landuse pattern and soil. Meteorological data of 2007 and 2009 were applied for the calibration and validation of runoff in SWAT. It was difficult to calibrate and validate the runoff and nutrient results since a study area was influenced by the tidal effects. Jindong site was selected to escape from the bias of runoff simulation in the coastal area. $R^2$ values of calibration and validation were 0.8 and 0.79. However, $R^2$ values of water qualities were very low level in comparison to runoff. These resulted from the concentration scale of water qualities such as BOD, T-N and T-P. Additionally, tidal influence could effected on the measurements of nutrients. The simulated annual averages and patterns of BOD, T-N and T-P in SWAT were similar to the measurement data. 80 ~ 96 % of nonpoint source pollutants at Nakbon M site were released from April to August of 2009. The ratio of T-N and T-P from nonpoint source were above 50 % during the rainy season.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.369-376
• /
• 2003

This study was conducted to develop a precision measurement method of water content in soil (find sand and silty sand) using dual RF impedance changes. The electrically stable perpendicular plate capacitive sensor was fabricated and utilized to sense the water content in soil. Crystal oscillators of 5 and 20 MHz and related circuits were designed to detect the capacitance changes of a perpendicular plate capacitive sensor with soil samples at various volumetric water contents. A multiple regression model for volumetric water content having dual oscillation frequency changes at 5 and 20 MHz as independent variables resulted in coefficient of determination of 0.963 and standard error calibration of 0.030 cm$^3$/cm$^3$ for calibration and coefficient of determination of 0.966, standard error of prediction of 0.027 cm$^3$/cm$^3$ and bias of 0.001 cm$^3$/cm$^3$ for prediction.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.75-87
• /
• 2003

The primary objective of this study is to demonstrate ground-based experiment for the attitude control of spacecraft. A two-axis rotational simulator with a flexible ann is constructed with on-off air thrusters as actuators. The simulator is also equipped with payload pointing capability by simultaneous thruster and DC servo motor actuation. The azimuth angle is controlled by on-off thruster command while the payload elevation angle is controlled by a servo-motor. A thruster modulation technique PWM(Pulse Width Modulation) employing a time-optimal switching function plus integral error control is proposed. An optical camera is used for the purpose of pointing as well as on-board rate sensor calibration. Attitude control performance based upon the new closed-loop control law is demonstrated by ground experiment. The modified switching function turns out to be effective with improved pointing performance under external disturbance. The rate sensor calibration technique by Kalman Filter algorithm led to reduction of attitude error caused by the bias in the rate sensor output.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.605-613
• /
• 2014

Scanning white-light interferometry is an important measurement option for many surfaces. However, serious profile measurement errors can be present when measuring free-form surfaces being highly curved or tilted. When the object surface slope is not zero, the object and reference rays are no longer common path and optical aberrations impact the measurement. Aberrations mainly occur at the beam splitter in the interference objective and from misalignment in the optical system. Both effects distort the white-light interference signal when the surface slope is not zero. In this paper, we describe a modified version of white-light interferometry for eliminating these measurement errors and improving the accuracy of white-light interferometry. Moreover, we report systematic errors that are caused by optical aberrations when the object is not flat, and compare our proposed method with the conventional processing algorithm using the random ball test.

• 분석과학
• /
• 제7권2호
• /
• pp.155-164
• /
• 1994

전형적인 Grimm형 방전관을 제작하고 고주파 방전에 의한 금속 및 세라믹시료 분석에 적용하였다. 금속 알루미늄과 알루미나에 대해 방출 스펙트럼을 관찰하였고 방전에 미치는 고주파의 전력과 알곤 기체의 압력에 대한 영향을 관찰하였으며, 시료와 접촉된 전극에 나타나는 DC-bias voltage를 확인하였다. 또한 SEM 사진을 관찰함으로써 rf-sputtering에 의한 알루미나 표면의 미세구조를 확인하였다. 저합금강(BAS 404-405) 중의 망간성분과 황동시료(NIST 1108-1117) 중의 아연성분에 대해 검량곡선을 작성한 결과 양호한 직선성을 보여 주었다.

• 한국관개배수논문집
• /
• 제19권1호
• /
• pp.87-96
• /
• 2012

Information of local solar radiation is essential for many field, including water resources management, crop yield estimation, crop growth model, solar energy systems and irrigation and drainage design. Unfortunately, solar radiation measurements are not easily available due to the cost and maintenance and calibration requirements of the measuring equipment and station. Therefore, it is important to elaborate methods to estimate the solar radiation based on readily available meteorological data. In this study, two empirical equations are employed to estimate daily solar radiation using Cheongju Regional Meteorological Office data. Two scenarios are considered: (a) sunshine duration data are available for a given location, or (b) only daily cloudiness index records exist. Simple linear regression with daily sunshine duration and cloudiness index as the dependent variable accounted for 91% and 80%, respectively of the variation of solar radiation(H) at 2011. Daily global solar radiation is highly correlated with sunshine duration. In order to indicate the performance of the models, the statistical test methods of the mean bias error(MBE), root mean square error(RMSE) and correlation coefficient(r) are used. Sunshine duration and cloudiness index can be easily and reliably measured and data are widely available.