• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.188-197
• /
• 2010

This paper presents research result to study the change of structural capacity of reinforced concrete beams with various shear reinforcement ratios after damage by fire load. In addition, fundamental data are given in order to predict the strength variation of RC member due to fire damage by evaluating the previous calculation method codified in codes. Nine RC beam specimens were made and exposed to the fire controled by the standard fire curve. And the structural capacity was evaluated through a failure test under simple support condition. Previous code formula, ACI code and Eurocode were reviewed and used for the calculation of the strength of specimens damaged by fire. From the test, RC beam specimens exhibited very brittle failure when it exposed to fire controled by standard fire curve during more than one hour. And this failure pattern tended to be more serious when shear reinforcement ratio decreased or fire loading duration increased. From the evaluation of the calculation process in code, the change of strength due to fire can be properly predicted if the damage of materials is well defined.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.355-366
• /
• 2014

Objectives: This study seeks to evaluate the vulnerability assessment of the human health sector for $PM_{10}$, which is reflected in the regional characteristics and related disease mortality rates for $PM_{10}$ in Busan over the period of 2006-2010. Methods: According to the vulnerability concept suggested by the Intergovernmental Panel on Climate Change (IPCC), vulnerability to $PM_{10}$ is comprised of the categories of exposure, sensitivity, and adaptive capacity. The indexes of the exposure and sensitivity categories indicate positive effects, while the adaptive capacity index indicates a negative effect on vulnerability to $PM_{10}$. Variables of each category were standardized by the rescaling method, and each regional relative vulnerability was computed through the vulnerability index calculation formula. Results: The regions with a high exposure index are Jung-Gu (transportation region) and Saha-Gu (industrial region). Major factors determining the exposure index are the $PM_{10}$ concentration, days of $PM_{10}{\geq}50$, ${\mu}g/m^3$, and $PM_{10}$ emissions. The regions that show a high sensitivity index are urban and rural regions; these commonly have a high mortality rate for related disease and vulnerable populations. The regions that have a high adaptive capacity index are Jung-Gu, Gangseo-Gu, and Busanjin-Gu, all of which have a high level of economic/welfare/health care factors. The high-vulnerability synthesis of the exposure, sensitivity, and adaptive capacity indexes show that Dong-Gu and Seo-Gu have a risk for $PM_{10}$ potential effects and a low adaptive capacity. Conclusions: This study presents the vulnerability index to $PM_{10}$ through a relative comparison using quantitative evaluation to draw regional priorities. Therefore, it provides basic data to reflect environmental health influences in favor of an adaptive policy limiting damage to human health caused by vulnerability to $PM_{10}$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.294-306
• /
• 2008

The purpose of this study is a men's dress shirt pattern by somatotype for mass customization system that is rising to the surface as a new production system. Subjects were 65 men aged from 25 to 44 for making research pattern and 9 men for wearing test. The dress shirt went through the secondary wearing test and sensory evaluation to verify the propriety of the research pattern. The results were as follows: For making research dress shirts pattern used the body parts size that were height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference. The waist back length, the waist to hip length and the pattern length of were set by the calculation formula based on the height. The ease of 16cm for the chest circumference and A type had the ease of 10cm for the waist circumference, Y type had the ease of 8cm and B type had 12cm. Through the wearing test, the research pattern showed significant difference from the comparative patterns so additional two items of the length between biacromion and waist circumference were added to the items used in the comparative patterns through which satisfactory results were obtained. In the secondary wearing test for the dress shirt, all the items, except for the front centerline, were evaluated excellent. As a result of evaluating by the figure type, the normal type was evaluated best in all the items.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.4
• /
• pp.307-317
• /
• 2000

The purpose of this study is to form a calculation formula of the mean skin temperature on the human body in a heated room by the use of floor heating system. Korean traditional floor heating system is a long way from being defunct. The floor heating systems based on hot water have been coming into wide use mainly in the apartment house. However, it is considered that the design process and evaluation method for the floor heating systems in the standpoint of human being are not established so far. In the floor heating systems, air temperature as well as floor temperature should be considered as physical factors which affect the sensation of human body. Furthermore, extremely few studies have been performed on the sitting with legs crossed posture sedentary which is the typical dwelling life style of residents from the ancient times in Korea, while a large number of studies on the influence of the floor heating systems on the human body in standing and sitting on a chair sedentary have been carried out. Especially, it is essential to elucidate how mean skin temperature on the human body is affected by thermal conduction in the contact area between the sitting with legs crossed posture sedentary human body and floor including thermal radiation due to the combination of air temperature and floor temperature, but the studies dealt with such issues have hardly been performed. Based on the above statements, the influence of the environment condition due to the combination of air temperature and floor temperature is discussed in the present investigation through theoretical of mean skin temperature on the human body in the floor heating systems.

• Journal of Korea Water Resources Association
• /
• v.55 no.6
• /
• pp.461-469
• /
• 2022

It is very important to ensure the reliability of dam inflow data, which is critical in planning and managing the supply and demand of water resources in a basin. However, the simple water balance model sometimes results in negative inflows and does not consider the actual inflow characteristics. In this study, to address these issues, the existing water balance formula was modified by considering evaporation which is available for calculation among other outflows. The modified water balance formula was applied to the Soyang Dam. The results showed that the rate of negative inflows decreased in the re-evaluated dam inflow data and it was possible to secure consistency for the total inflow volume. In addition, investigating the water availability in the Soyang Dam watershed based on the water balance concept considering evaporation, it was found that direct water use in the human aspect was about 60%, and the indirect water use in the natural aspect was about 40%. In drought years, it was also confirmed that the proportion of indirect use of water resources increased.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.199-206
• /
• 2009

In relation with economical efficiency analysis on investment evaluation of transportation system, among vehicle operating cost saving benefit that is applied to general preliminary assessment guidelines and investment evaluation guidelines, oil expense calculated data which concentrated and analyze on the relationship between oil consumption amount on running state and running speed. For uninterrupted flow which does not have stopped delay due to traffic signal, consideration for reduction benefit is possible due to the changes of running speed and travel time however, for interrupted flow which the stopping occurs due to signal control on actual signal intersection has no consideration for stopping delay time reduction and stopping rate improvement thus reflection of reality on improved effect analysis is difficult. Therefore, this research makes a framework to analyze benefits that reflects the features of signalized intersections by benefits associated with decrease of stopping delay time with existing research and developing vehicle operating cost calculation model formula. Vehicle operating cost has been redefined considering the stopping delay time by applying the oil consumption amount at idling and the economical benefit between conventional model and newly developed model when applied for the optimization of traffic signal system on the two roads in Seosan city has been analyzed comparative. While the importance of traffic system maintenance is being emphasized due to the increase of congested areas on roads, it is expected to assist in more realistic economical analysis which reflect the delay improvement through the presentation of an economic analysis model that considers the features of signalized intersections in signal optimization system improvements and effect analysis of congestion improvement projects`.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2024

The expansion joint is installed to offset the expansion of the superstructure and must ensure sufficient gap during its service life. In detailed guideline of safety inspection and precise safety diagnosis for bridge, damage due to lack or excessive gap is specified, but there are insufficient standards for determining the abnormal behavior of superstructures. In this study, a data-based maintenance was proposed by continuously monitoring the expansion-gap data of the same expansion joint. A total of 2,756 data were collected from 689 expansion joint, taking into account the effects of season. We have developed a method to evaluate changes in the expansion joint-gap that can analyze the thermal movement through four or more data at the same location, and classified the factors that affect the superstructure behavior and analyze the influence of each factor through deep learning and explainable artificial intelligence(AI). Abnormal behavior of the superstructure was classified into narrowing and functional failure through the expansion joint-gap evaluation graph. The influence factor analysis using deep learning and explainable AI is considered to be reliable because the results can be explained by the existing expansion gap calculation formula and bridge design.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.10
• /
• pp.221-230
• /
• 2014

In this study, we propose a learning method that can be extended to take advantage of the knowledge of the various disciplines in the project related to the subject to perform the process of restoring stork. The development program is grade 3.4 Group 4 class hours, grade 5.6 Group 4 class hours, total 8 class hours, and in each class hour, it was designed to be extended such creativity, problem solving skills, communication skills and ability to learn, based on knowledge and concepts of the elementary curriculum related to storks. Content validity was verified using a method consisting of 12 experts to verify the validity of the program. Feasibility evaluation of Lawshe (1975) content validity ratio for the analysis: we used (Content Validity Ratio CVR) calculation formula. As a result of a feasibility study in total 8 class hours, It was analyzed that match with the development effect except for program of grade 3.4 group 4 class hours. grade 3.4 group 4 class hours program was raised this issue for the academic linkage region, was fixed. Later, It is necessary to measure the degree of learning skills improves effectiveness by applying it to the elementary school students in the proposed research program.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.57-62
• /
• 1999

Condition indices (Cl) are considered to be useful measurements of the nutritive and health status of bivalves although studies on Cl of bivalves are limited due to the lack of a standard formula for calculating Cl. This study attempts to generate Cl of the mussel, Mytilus coruscus inhabiting along the coastal area of Chuja Island in Cheju using three primary formulas. the formulas used in this study: (1) Cl-vol= [tissue dry weight (g) 1000] /shell cavity volume (ml). (2) Cl-wt= [tissue dry weight (g) 1000] / internal shell cavity capacity (g). (3) Cl-size= tissue wet weight (g)/[shell length (mm)]$\^$3/. Monthly condition indices calculated with the three formulas are compared using ANOVA, Duncan's multiple range test and Pearson correlation coefficient. In Chuja Island M. coruscus collected ranged from 50 to 180 mm in shell length. Monthly ranges of Cl-values were 67.48 to 140.61 (Cl-vol), 74.67 to 118.02 (Cl-wt) and 1.4 10$\^$-5) to 1.6 10$\^$-5/ (Cl-size). Cl-vol values in August were higher than two Cl-values in the other months. Monthly Cl-vol was significantly different from Cl-wt and Cl-size. (p<0.05). The results of this study suggest that volumetric condition index (Cl-vol) used in this study is acceptable as a standard measure to evaluate conditions of M. coruscus.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.397-410
• /
• 2002

In order to quantitatively identify historical drought conditions and to evaluate their variability, drought indices commonly used. The calculation method for the drought index based on the principal hydrological factors, such as precipitation and reservoir storage, can estimate the duration and intensity of a drought. In this study the Palmer-type formula for drought index is derived for the Nakdong River basin by analyzing the monthly rainfall and meteorological data at 21 stations. The Palmer Drought Severity Index(PDSI) is used for dry land sectors to evaluate the meteorological anomaly in terms of an index which permits time and space comparisons of drought severity. The Surface Water Supply Index(SWSI) is devised for the use in conjunction with the Palmer index to provide an objective indicator of water supply conditions in Nakdong River basin. The SWSI was designed to quantify surface water supply capability of a watershed which depends on river and reservoir water The Standardized Precipitation Index(SPI) is evaluated for various time periods of 1 to 12 months in Nakdong River basin. For the purpose of comparison between drought indices correlation coefficient was calculated between indices and appropriate SPI time period was selected as 10 months for Nakdong River basin. A comparative study is made to evaluate the relative severity of the significant droughts occurred in Nakdong River basin since 1976. It turned out that $'94{\sim}'97$ drought was the worst drought in it's severity. It is found that drought indices are very useful tools in quantitatively evaluating the severity of a drought over a river basin.