• Wind and Structures
• /
• 제36권1호
• /
• pp.31-40
• /
• 2023

This paper investigates the mechanical behavior of full-scale offshore fish cages under hydrodynamic loads. To simulate different cases, different materials were used in the fish cage and analyzed under different flow velocities. The cage system is studied in two parts: net cage and floating collar. Analyses were performed with the ANSYS Workbench program, which allows the Finite Element Method (FEM) and Computational Fluid Dynamics (CFD) method to be used together. Firstly, the fish cage was designed, and adjusted for FSI: Fluid (Fluent) analysis. Secondly, mesh structures were created, and hydrodynamic loads acting on the cage elements were calculated. Finally, the hydrodynamic loads were transferred to the mechanical model and applied as a pressure on the geometry. In this study, the equivalent (von Mises) stress, equivalent strain, and total deformation values of cage elements under hydrodynamic loads were investigated. The data obtained from the analyses were presented as figures and tables. As a result, it has been shown that it is appropriate to use all the materials examined for the net cage and the floating collar.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.46-56
• /
• 2008

A numerical model analysis was performed to analyze the motion and mooring tension response of submersible fish cage systems in irregular waves and currents. Two systems were examined: a submersible cage mooring with a single, high tension mooring and the same system, but with an additional three point mooring. Using a Morison equation type model, simulations of the systems were conducted with the cage at the surface and submerged. Irregular waves(JONSWAP spectrum) with and without a co-linear current with a magnitude of 0.5m/s were simulated into the model as input parameters. Surge, heave and pitch dynamic calculations were made, along with tension responses in the mooring lines. Results were analyzed in both the time and frequency domains and linear transfer functions were calculated.

• 수산해양기술연구
• /
• 제38권3호
• /
• pp.190-196
• /
• 2002

규칙파와 불규칙파 및 흐름이 함께 작용하는 상태에 놓인 가두리 시설에 대해 작용 유체력을 가두리 시설의 부설 방향별로 해석하기 위하여, 정사각형 모형 가두리 시설과 원형 모형 가두리 시설을 대상으로 예인 수조에서 수리 모형 실험을 실시하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 규칙파를 받고 있는 정사각형 가두리 시설에 작용하는 유체력은 가두리 시설의 부설 방향별로 큰 차이를 보이지 않았다. 2. 불규칙파와 흐름을 동시에 받고 있는 가두리시설에 작용하는 파력 에너지의 피크 주파수는 파의 그것과 잘 일치하였고, 작용 유체력은 정사각형 가두리 시설보다 원형 가두리 시설에서 더 작았다. 3. 가두리 시설의 안정성에서 있어서는 그 구조가 원형인 것이 정사각형인 것보다 나은 편이었다.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.763-768
• /
• 2012

The objective of this study was undertaken to investigate changes in fatty acid profile of breast and thigh muscle of old laying hens as transferred from cage to backyard raising system and to provide basic information on using old laying hens to producers for environmental managements. Overall, percentages of unsaturated fatty acid obtained from breast and thigh muscle with cage and backyard raising system are the most abundant, followed by saturated fatty acid. For breast muscle, there were no differences (P>0.05) between cage rearing system and backyard raising system in saturated fatty acid (SFA) and mono unsaturated fatty acid (MUFA). Poly unsaturated fatty acid (PUFA) and PUFA:SFA ratios were significantly higher in backyard raising systems in comparison with cage rearing systems (P<0.05). No differences (P>0.05) were detected between both rearing systems for MUFA, PUFA, and PUFA:SFA ratios with thigh muscles. SFA in thigh muscle was significantly (P<0.05) higher in cage rearing systems compared with backyard raising systems. In conclusion, using breast and thigh muscle meats from old laying hens as functional foods or investigating impact assessment on the improvement of farm management system may serve as a good management practice to encourage producers.

• Smart Structures and Systems
• /
• 제11권3호
• /
• pp.283-297
• /
• 2013

An innovative cage for spinal fusion surgery is presented within this work. The cage utilizes shape memory alloy for its hinge actuation. Because of the use of SMA, a smaller incision is needed which makes the cage deployment minimally invasive. In the development of the cage, a model for predicting the torsional behavior of SMAs was developed and verified experimentally. The prototype design of the cage was developed and manufactured. The prototype was subjected to static tests per ASTM specifications. The cage survived all of the tests, alluding to its safety within the body.

• Animal Bioscience
• /
• 제35권3호
• /
• pp.444-452
• /
• 2022

Objective: An experiment was conducted to evaluate the effect of different levels of crude protein (CP) and two rearing systems (cage and floor), on blood parameters and digestive and reproductive organ development of brown laying hens. Methods: A total of 400 Hisex Brown laying hens between 30 and 45 weeks of age were distributed in a completely randomized design and a 2×4 factorial arrangement, with main effects including two rearing systems (cage and floor) and levels of CP (140, 150, 160, and 180 g/kg), in a total of eight treatments and five replicates of 10 birds each with initial body weight of 1,877 g (laying hen in cage) and 1,866 g (laying hens in floor). The parameters evaluated were plasma total protein, albumin, uric acid, total cholesterol, relative weights of oviduct, abdominal fat, liver, gizzard, crest and dewlap, length of small intestine and oviduct. Results: The blood parameters were similar in birds reared in cage and floor systems. The birds reared on the floor showed greater small intestine and oviduct weight (%) and lower liver and pancreas weight (%). A significant interaction was observed between factors for the relative gizzard, crest and dewlap weight, serum protein, uric acid, and total cholesterol (p<0.05). The diets with 140 g/kg CP resulted in lower serum protein and lower cholesterol in birds reared in floor system, while birds reared in cage system showed no effect of CP on both parameters. Birds reared in cage and fed with 140 and 150 g/kg CP presented lower uric acid. The group of birds reared in floor system fed 180 g/kg had greater uric acid. Conclusion: The dietary protein level can be reduced up to 140 g/kg for Hisex Brown hens (30 to 45 weeks of age) without an important effect on metabolic profile and organ development in both rearing systems.

• 한국환경과학회지
• /
• 제22권6호
• /
• pp.773-777
• /
• 2013

This study examined the effects of cage rearing system and backyard raising system on fatty acid profile of egg in laying hens during 9 weeks. Two hundred hens, 70-wk-old, Hy-line Brown, were used in this study and fed basal diets. 100 hens, randomly collected from facility, were transferred to cage rearing system and 100 remaining hens were moved to backyard raising system. For overall period, higher unsaturated fatty acid percentages in two different rearing systems than did saturated fatty acid (SFA) were observed. In unsaturated fatty acid compositions, both rearing system showed a higher mono unsaturated fatty acid (MUFA) contents than poly unsaturated fatty acid (PUFA) contents. Egg quality traits of laying hens reared in backyard system had considerably lower contents of SFA and higher contents of MUFA compared with eggs from cage rearing system (P<0.05). In addition, eggs from cage rearing system resulted in a significantly lower n-3 contents and higher n-6:n-3 ratios and CLA contents in comparison with backyard raising system (P<0.05). However, no significant effects of two different rearing systems on PUFA, PUFA:SFA ratio, and n-6 contents were observed during the experimental period. In conclusion, this result suggests that cage rearing system and backyard raising system will play an important role in improving egg production as functional foods.

• 한국가금학회지
• /
• 제40권1호
• /
• pp.67-73
• /
• 2013

With an increasing concern on laying hen welfare, barn system has appeared as one of the alternatives to replace the conventional cage. This study was conducted to compare the early laying performance and egg quality at the barn system with those at the conventional cage. A total of 288 shaver-579 brown layers were used for 9 weeks ($21^{st}$ to $30^{th}$ weeks of age) feeding study. Feed consumption and egg weight were significantly (P<0.01) higher at barn than at cage. However, there were no significant differences between two housing systems on hen day egg production (HDEP), egg mass, body weight, feed efficiency and livability. In case of egg quality parameters, shell thickness, albumen height and Haugh unit were significantly (P<0.05) different between two systems. Haugh unit and albumen height were significantly higher in eggs produced at cage (88.97 and 8.16 mm) compared than those produced at barn (83.11 and 6.87 mm), whereas shell thickness was thicker in eggs produced at barn than those produced at cage. Shape index, breaking strength, blood spots and yolk index data were not influenced significantly by the types of housing system. To implement welfare bestowing production, this study showed that the barn system can replace the conventional cage without serious sacrifices on starting phase egg production. In addition, this study suggested that the barn system need to be optimized in view of daily feed consumption.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.379-385
• /
• 2018

Boresight process is to match the misalignment between PNU(Position Navigation Unit) and the reference axis of K-MLRS cage. It is important process to ensure accuracy of K-MLRS. When PNU is removed from cage in the previous alignment procedure, there is a misalignment angle with cage of K-MLRS during reassembly process. Therefore, boresight process is always need to align reference axes between PNU and K-MLRS cage. However, this study has proposed the case alignment process that it enable to correspond to reference axes between ISA (Inertial Sensor Assembly) block and PNU case. So, improved alignment procedure enables to install PNU in the reassembly process without additional boresight process.

• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.127-132
• /
• 2001

This paper describes two different systems which can compensate harmonic currents generated in a power system. As non-linear loads increase gradually in industry fields, harmonic current generated in the electric power network system also increases. Harmonic current makes a power network current distorted and generates heat, vibration and noise in the power machinery. Many approaches have been applied to compensate harmonic currents generated in the power system. Among various approaches, in this paper, two kinds are compared and evaluated. They are flywheel compensators bases on secondary excitation of WRIM(wounded rotor induction motor) and SCIM(squirrel cage induction motor). Both systems have a common structure. They use a flywheel as an energy storage device and use PWM inverters. The main differences are the size and rating of the converter used.