• Fisheries and Aquatic Sciences
• /
• 제17권2호
• /
• pp.197-201
• /
• 2014

This study was performed to identify and assess food hazards during dry laver processing. Samples including raw materials, intermediates, and finished products during dried-laver processing were collected from seven dried-laver processing facilities, and microbial analyses were conducted. Microbial levels such as total coliforms and total viable cell count (TVC) increased as the processing steps progressed. TVC and total coliforms ranged from <30 to $9.1{\times}10^7$ CFU/g and <18 to 27,600 MPN/100 g for intermediates and finished products obtained during dried-laver processing, respectively. However, no fecal coliform was detected in the samples. Additionally, food-borne bacteria including Bacillus cereus, Listeria monocytogenes, Salmonella sp., Staphylococcus aureus, and Vibrio parahaemolyticus were not identified in finished products. For heavy metal content, arsenic ranged from 30.18 to 39.05 mg/kg, mercury from 0.005 to 0.009 mg/kg, and cadmium from 0.076 to 0.318 mg/kg dry mass in all finished products. However, lead was not detected in samples tested in this study. In conclusion, dried-laver products were safe based on the levels of food-borne bacteria and heavy metal contents. However, it is important to reduce total viable cell counts and total coliforms during dried-laver processing.

• 한국지반환경공학회 논문집
• /
• 제3권1호
• /
• pp.13-26
• /
• 2002

본 연구에서는 아연 및 카드뮴의 확산계수에 미치는 온도영향에 대한 연구를 위해 $15^{\circ}C$와 $55^{\circ}C$에서 확산실험을 수행하였다. 온도변화에 따른 유효확산계수의 변화를 비교할 경우 두 금속 모두에서 $55^{\circ}C$에서의 유효확산계수가 $15^{\circ}C$에서의 확산계수에 비해 최대 10배까지 큰 것으로 나타났다. 그리고 온도증가에 따른 확산속도의 증가와 더불어 중금속들의 흡착량 또한 증가하는 것으로 나타났다. 그러므로 지연인자를 얻는 방법의 차이에 따라 비교적 흡착량을 과다하게 평가하는 흡착실험을 통해 얻은 지연인자를 이용하여 유효확산계수를 산정할 경우 확산계수를 과대평가 할 수 있다. 그리고 연속추출 실험 결과, 아연의 경우에는 탄산염 형태로의 분배경향이 가장 크게 나타났고, 카드뮴의 경우에는 이온교환형태로의 분배가 가장 크게 나타났다. 특히 실험을 수행한 온도가 증가함에 따라 아연 확산실험의 경우에는 탄산염 형태와 유기물 형태로의 분배가 증가하는 것으로 나타났다. 반면 카드뮴 확산실험의 경우에는 온도변화와 무관하게 60%이상이 이온교환 형태로 분배됨을 알 수 있었다.

• 한국수산과학회지
• /
• 제50권2호
• /
• pp.120-129
• /
• 2017

This study assessed the safety of raw oysters Crassostrea gigas for consumption during processing in a processing plant. Bacterial contamination (e.g., viable cell counts, coliform groups, Escherichia. coli and pathogenic bacteria) and chemical contamination (e.g., heavy metals and shellfish toxins) were measured on raw oysters, a processing equipment, employees and work areas. No total mercury, lead, paralytic shellfish poison, diarrheic shellfish poison or norovirus was detected in any post-harvested oyster samples. However, the cadmium level ranged from 0.1-0.2 mg/kg. The viable cell count, E. coli and coliform group levels in post-harvested oysters ranged from 4.00-4.54 log CFU/g, ND-210 MPN/100 g and 110-410 MPN/100 g, respectively. The viable contaminating cell counts on employees, equipment and work areas were in the range of $0.90-3.46log\;CFU/100cm^2$. Airborne bacteria in the work areas ranged from 0.60 to 1.81 log CFU/plate/15 min. Thus, no significant health risks were detected in the processing plant.

• Carbon letters
• /
• 제10권2호
• /
• pp.114-122
• /
• 2009

Crushed, depitted peach stones were impregnated activated with 50% $H_3PO_4$ followed by pyrolysis at $500^{\circ}C$. Two activated carbons were produced, one under its own evolved gases during pyrolysis, and the second conducted with air flow throughout the carbonization stage. Physicochemical properties were investigated by several procedures; carbon yield, ash content, elemental chemical analysis, TG/DTG and FTIR spectra. Porosity characteristics were determined by the conventional $N_2$ adsorption at 77 K, and data analyzed to get the major texture parameters of surface area and pore volume. Highly developed activated carbons were obtained, essentially microporous, with slight effect of air on the porous structure. Oxygen was observed to be markedly incorporated in the carbon matrix during the air treatment process. Cation exchange capacity towards Cu (II) and Cd (II) was tested in batch single ion experimental mode, which proved to be slow and a function of carbon dose, time and initial ion concentration. Copper was up taken more favorably than cadmium, under same conditions, and adsorption of both cations was remarkably enhanced as a consequence of the air treatment procedure. Sequestration of the metal ions was explained on basis of the combined effect of the oxygen functional groups and the phosphorous-containing compounds; both contributing to the total surface acidity character.

• BMB Reports
• /
• 제34권4호
• /
• pp.379-384
• /
• 2001

The cDNA encoding ribosomal protein was identified from a cDNA library of Schizosaccharomyces pombe. The nucleotide sequence of the 548 by cDNA clone reveals an open reading frame, which encodes a putative protein of 166 amino acids with a molecular mass of 18.3 kDa. The amino acid sequence of the S. pombe L11 protein is highly homologous with those of rat and fruit, while it is clearly less similar to those of prokaryotic counterparts. The 1,044 by upstream sequence, and the region encoding N-terminal 7 amino acids of the genomic DNA were fused into the promoterless $\beta$-galactosidase gene of the shuttle vector YEp357 in order to generate the fusion plasmid pHY L11. Synthesis of $\beta$-galactosidase from the fusion plasmid varied according to the growth curve. It decreased significantly in the growth-arrested yeast cells that were treated with aluminum chloride and mercuric chloride. However, it was enhanced by treatments with cadmium chloride ($2.5\;{\mu}M$), zinc chloride ($2.5\;{\mu}M$), and hydrogen peroxide (0.5 mM). This indicates that the expression of the L,11 gene could be induced by oxidative stress.

• 한국수산과학회지
• /
• 제50권4호
• /
• pp.343-351
• /
• 2017

Sanitary evaluation of seawater and Pyropia sp. laver collected from the five major laver growing areas in Korea was performed four times over the course of a year. The seawater quality in four of these five areas was regarded as the clean area according to Korean criteria, but the seawater at one investigation site in Seoheon area was found to exceed the standard for fecal coliform. In the bacteriological safety analysis of laver (raw source), the percentages of samples not conforming to Chinese criteria at the five sites were 55.6% (Seocheon), 70.0% (Shinan), 81.8% [Jindo (Haenam)], 63.6% (Wando), and 28.6% [Goheung (Jangheung)]. Pathogenic bacteria were not detected in all laver samples. The food safety of laver (raw source) based on heavy metal concentration was confirmed using Korean criteria; the concentrations of heavy metals in laver samples collected from the major laver growing areas were 0.008-0.632 mg/kg wet weight (ww) lead, 0.024-0.137 mg/kg ww cadmium, 0.908-2.892 mg/kg ww total arsenic, and 0.003-0.013 mg/kg ww total mercury. Therefore, pollution source management and periodic monitoring of heavy metals may be required to improve the food safety of laver produced in these laver growing areas.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.

• 자원환경지질
• /
• 제29권3호
• /
• pp.305-313
• /
• 1996

In order to investigate the extent and degree of Cd, Cu, Pb and Zn contamination affected by mining activities of the Dalsung Cu~W mine, sampling of stream sediments and waters has been undertaken up to 1.5 km downstream from the mine at 50~150 meter intervals. Analysis of the samples was carried out using ICP-AES for Cd, Cu, Pb and Zn. Physical and chemical properties of sediments (pH, organic matter contents, cation exchange capacity) and waters (pH, Eh and temperature) were also measured. The properties of the sediment samples were characterized by low pH (3.0~5.5), low organic matter contents (2~5%) and a moderate degree of cation exchange capacity (7~15 meq/100 g) with a high proportion of sand fraction. The pH values of water samples ranged from 3.0 to 5.0 and the Eh levels were in the range of 350~530 mV. Concentrations of Cd, Cu, Pb and Zn in the sediments averaged 3.2 mg/kg, 1,390 mg/kg, 451 mg/kg and 262 mg/kg with the range of 0.6~11.4 mg/kg, 15~3,800 mg/kg, 14~1,330 mg/kg and 63~1,060 mg/kg, respectively. Significant levels of the heavy metals were also found in the water samples with the range of $10{\sim}170{\mu}gCd/l$, $300{\sim}41,600{\mu}gCu/l$, $10{\sim}80{\mu}gPb/l$ and $700{\sim}15,400{\mu}gZn/l$. These elevated concentrations in the sediments and waters may be caused by the weathering of mine waste materials and their high solubilities under acidic and/or oxidizing conditions. Although metal concentrations in the samples decrease with the distance from the mine, heavy metal contamination of sediments and waters were also found at the 1.5 km downstream due to the mobile conditions of the heavy metals, with particular reference to Cd and Zn in stream waters.

• Journal of Radiation Protection and Research
• /
• 제12권1호
• /
• pp.48-53
• /
• 1987

중성자 선원의 강도를 측정하기 위하여 흔히 황산망간용액조 방법이 사용되고 있다. 본 연구에서는 $^{55}Mn(n,{\gamma})^{56}Mn$ 반응에 도입되는 국산 $MnSO_4{\cdot}H_2O$(동양화학제품)중에 불순들 성분을 규명하기 위하여 Ar-ICP 플라즈마방출 분광계측에 의한 분석화학 방법이 사용되었다. 분석결과로부터 주로 Co, Zn과 미량의 Cd, Li 등이 관련 불순물로서 중성자를 흡수하는 것으로 판명되었으며 전체 불순물에 의한 중성자 흡수 비율은 $^{55}Mn$에 의하여 포획되는 중성자 수의 약 1.37%로 산정되었다.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.528-535
• /
• 2005

It is inclined to increase that use of hazardous substances such as lead(Pb), mercury (Hg), cadmium(Cd) etc. are prohibited in the electronics according to environmental friendly policies of an advanced nation for protecting environment of earth. As this reasons, many researches for ensuring the reliability were proceeding in Pb free soldering process. n the flux remains on the PCB(printed circuit board) in the soldering process or the electronics exposed to corrosive environment, it becomes the reasons of breakdown or malfunction of the electronics caused by corrosion. Therefore in this studies we researched the polarization and Tafel properties of Sn40Pb and SnCu system solders based on the electrochemical theory. The experimental polarization curves were measured in distilled ionized water and 1 mole $3.5 wt\%$ NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrodes, respectively. To observe the electrochemical reaction, polarization test was conducted from -250mV to +250mV. From the polarization curves composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density((cow). In these results, we compared the corrosion rate of SnPb and SnCu solders.