• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.36-44
• /
• 1979

Those studies were examined rearing two varieties on Japanese descent and two varieties of Chinese descent by feeding polluted mulberry leaves, non-polluted ones and water-cleaned ones respectively to find effects of air-pollution on the economic characters of silkworms and analysis of contents of Sulphur and Cadmium in the mulberry leaves and silkworms as followings; 1) Japanese descent of polluted part was delayed about 2.5 days than non-polluted part, Chinese descent was delayed about 4 days or inequal and water-cleaned part was medium in the silkworm larval duration. 2) Results of maximum weight of 5th instal, cocoon layer weight and cocoon weight were decreased in due order non-polluted, water-cleaned and polluted in the factors of mulberry 3) Pupal ratio of Japanese descent was not shown statistical significance, but Chinese descent was revealed it obviously in the factors of mulberry leaves. 4) In the resistance of polluted mulberry leaves, Chinese descent was feeble obviously than Japanese and there were some difference even through among the same varieties. 5) The content of S and Cd of polluted area mulberry leaves was increased about 30% respectively than non-polluted area. 6) The fed part of non-polluted mulberry leaves was S 0.41% and Cd 0.013 ppm water-cleaned part was S 0.47% and Cd 0.024 ppm and polluted part was S 0.52% and Cd 0.042 ppm in the contents of S and Cd of silkworm larvae. 7) The contents of S and Cd didn't make visible injury in mulberry leaves but made it seriously in silkworm larvae. 8) The injury of dust on mulberry leaves was more serious than that of quality of mulberry leaves by air-pollution in the economic characters of silkworm. 9) As above results, Chinese descent should avoid contaminated area and it rearing by water-cleaned mulberry leaves can get noticable results in inevitable case on selection of parents silkworm rearingzone.

• Clean Technology
• /
• v.27 no.2
• /
• pp.139-145
• /
• 2021

The purpose of this study is to recover valuable metals from spent batteries using a dry process. We focused on the effect of the smelting temperature on the composition of recovered solid and liquid products and collected gaseous products. After removal of the cover, the spent battery was left in NaCl solution and discharged. Then, the spent battery was made into a powder form through a crushing process. The smelting of the spent battery was performed in a tubular electric furnace in an oxygen atmosphere. For spent lithium-ion batteries, the recovery yield of the solid product was 80.1 wt% at a reaction temperature of 850 ℃, and the final product had 27.2 wt% of cobalt as well as other metals such as lithium, copper, and aluminum. Spent nickel-hydrogen batteries had a recovery yield of 99.2 wt% at a reaction temperature of 850 ℃ with about 37.6 wt% of nickel and other metals including iron. For spent nickel-cadmium batteries, the yield decreased to 65.4 wt% because of evaporation with increasing temperature. At 1050 ℃, the recovered metals were nickel (41 wt%) and cadmium (12.9 wt%). Benzene and toluene, which were not detected with the other secondary waste batteries, were detected in the gaseous product. The results of this study can be used as basic data for future research on the dry recycling process of spent secondary batteries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.302-324
• /
• 2022

Objectives: The objective of this study is to investigate exposure to occupational carcinogens in the nationwide electronics industries and to establish a strategy for control of occupational carcinogens in South Korea. Methods: We evaluated occupational carcinogens as defined by International Agency for Research on Cancer (IARC) using a nationwide work environment measurement database on the electronics industry in South Korea measured between 2013 and 2017 in accordance with the Occupational Safety and Health Act. Results: The number of occupational carcinogens found in the electronics industry in South Korea were: 20 for IARC Group 1, 14 for Group 2A, and 30 for Group 2B. The occupational carcinogens (Group 1) most frequently exposed were strong-inorganic-acid mists containing sulfuric acid (sulfuric acid), welding fumes, mineral oils (untreated or mildly treated), nickel compounds, silica dust, crystalline substances in the form of quartz or cristobalite, formaldehyde, arsenic and inorganic arsenic compounds, chromium (VI) compounds, trichloroethylene, cadmium and cadmium compounds, vinyl chloride, ethylene oxide, wood dust, beryllium and beryllium compounds, 1,3 butadiene, benzene, and others. Among them, the carcinogens (Group 1) exceeding the acceptable standard were trichloroethylene, formaldehyde, and ethylene oxide. The working environment measurement system as regulated by Occupational Safety and Health Act is not properly assessed and managed for occupational carcinogens in South Korea. A component analysis for all materials used should be set up to practically reduce occupational carcinogens. A ban on the use of occupational carcinogens and the development of alternative materials are needed. The occupational carcinogens below the acceptable standards should be carefully examined and a new standard for exposure needs to be established. Conclusions: The Occupational Safety and Health Act should be improved to identify and monitor occupational carcinogens at work sites. A strategy for occupational safety and health systems should be provided to give direction to workers' needs and right to know.

• Journal of Microbiology
• /
• v.35 no.4
• /
• pp.309-314
• /
• 1997

The manganese-containing superoxide dismutase (MnSOD) is a major component of the cellular defence mechanisms against the toxic effects of the superoxide radical. Within the framework of studies on oxidative stress=responsible enzymes in the Candida sp., the gene encoding the MnSOD was isolated and examined in this study. A specific primer was designed based on conserved regions of MnSOD sequences from other organisms, and was used to isolate the gene by PCR on reverse-transcribed Candida poly($A^{+}$) RNA. The PCR product was used to screen a Candida genomic lambda library and the nucleotide wequence of positive clone was determined. The deduced primary sequence encodes a 25kDa protein which has the conserved residues for enzyme activity and metal binding. The 28 N-terminal amino acids encoded by the Candida cDNA comprise a putatice mitochondrial transit peptide. Potential regulatory elements were identified in the 5' flanking sequences. Northern blot analysis showed that the transcription of the MnSOD gene is induced 5-to 10-fold in response to mercury, cadmium ions and hydrogen peroxide.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.184-189
• /
• 1998

Tris(pentafluorophenyl)indium acetonitrile complexes have been prepared from the reaction of Indium trihalides (halogen=Cl, Br) and bis(pentafluorophenyl)cadmium in acetonitrile, and characterized by elementary analysis, $^13C{^1H}-,\; ^1H-\;and\; ^{19}F-NMR$ spectroscopy and mass spectrometry. The Indium (III) compounds were formed stable 1:1 adducts with acetonitrile. $In(C_6F_5)_3{\cdot}DMAP$ has been prepared from the ligand exchange reaction of In$(C_6F_5)_3 {\cdot} CH_3CN$ with DMAP in $CH_2Cl_2 {\cdot} DMAP$ has higher donating character and replaced the $CH_3CN$ through the ligand transfer reaction.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.28-34
• /
• 2010

In this study, cow tibial from cow bone, a kind of beef waste, sintered at $800\sim850^{\circ}C$ for three hours was used to measure its removal capacity for metal ions such as Pb, Cd and Zn in a single and a multi-component equilibrium systems. The sorption equilibrium data were analyzed as measured by the effect of media on lead, cadmium and zinc sorption. This analysis shows that the sorption of metal ions for multi-component systems applying IAST can be predicted more reasonably by the Freundlich and the Sips theory than the Langmuir.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.125-132
• /
• 2012

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated. The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis. Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique. Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model. The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59 mg/g at 323 K, respectively. The thermodynamic parameters, Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$), and entropy (${\Delta}S^o$) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K. It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

• Environmental Analysis Health and Toxicology
• /
• v.20 no.4 s.51
• /
• pp.333-341
• /
• 2005

In order to know whether polychaetes could be used as an appropriate organism for the detection of genotoxicity, DNA strand breaks were evaluated in blood cells of a nereidae worm (Perinereis aibuhitensis) exposed to various aquatic chemical pollutants (e.g. Cd, Pb, Pyrene, Benaor[a]pyrene). Hydrogen peroxide increased DNA strand breaks up to the highest concentration (10 $\mu$M). Higher concentration than 0.1 $\mu$M showed a significantly more DNA damage than control. Cadmium and lead also showed higher DNA damage than control, over 1.0 and 1 $\mu$g/L, respectively. In case of pyrene, DNA damage was detected even at 0.001 $\mu$g/L. However, DNA damage decreased due to apoptosis at the highest concentration of pyrene and Pb. This study suggested that the polythaetous blood cells could be used effectively for screening genotoxic contaminants in the environment.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.19-26
• /
• 2010

Discharged materials from the point or non-point source are released into the sea, and as the results, marine environment is directly affected. We must estimate the impacts of contaminants to marine pollution rapidly and accurately. Therefore, it is needed on early warning system for appreciating marine environmental impacts, and required a bioassay to evaluate abnormal changes. A bioassay test was developed to examine the effects of heavy metal contaminants on the early life stages of the marine annimals. We have studied the effects of metals on early development of a sea urchin species, Strongylocentrotus intermedius. S. intermedius embryos were tested with six metals (Cu, Ag, Zn, Cd, Cr, Ni) and showed the highest sensitivity to Cu as well as the lowest sensitivity to Cd. The order of biological impact for metals was Cu>Ag>Ni>Zn>Cr>Cd. In accordance with the results, sea urchins embryos can provide biological criteria for seawater quality assessment. The sensitivity of developmental bioassay whith S. intermedius is at intermediate level among marine organisms commonly used in aquatic bioassays. And this sea urchin can be routinely employed as a test organism for ecotoxicity assays.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.1
• /
• pp.9-19
• /
• 2010

The size distribution of airborne particulate matter (PM) and the concentrations of associated metallic elements were investigated in a busy urban region of a typical Korean industrial city. The PM concentrations measured during the spring, except for those in the size range of 1.1 to 2.1 ${\mu}m$, were slightly higher than the PM concentrations in the summer. Coarse particles contributed greatly to the variation in PM concentrations in the spring, while fine and submicron particles contributed largely to the variation in PM concentrations in the summer. The difference in size modes of the PM concentrations between spring and summer may be explained by the Asian dust effect and its accompanying wind direction and speed. Extremely high enrichment factors (EFs) values (6,971 to 60,966) for all of the size distributions in PM were identified for cadmium (Cd). High EFs values (12 to 907) were also identified for other heavy metals including Cr, Cu, Ni, Pb, Zn and Mn. Low EF values (0.29 to 8.61) were identified for Ca, K, Mg and Na. These results support the common hypothesis that most heavy metals in ambient PM have anthropogenic sources and most light metals have crustal sources. The results of principal components analyses and cluster analyses for heavy metals indicate that the principal sources of PM and metals were emissions from non-ferrous metal smelters, oil combustion, incinerators, vehicular traffic and road dust.