• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.375-380
• /
• 2011

Loading/unloading at sea is necessitated as larger container ships are being used. It is also unavoidable to load/unload at sea during military operations. An experimental cable array robot system, which can be used for loading/unloading at sea, consisting of four cables operated by four motors is designed and built. Even though it has simple structure, it has a large pay-load/robot-weight ratio, flexibility and wide workspace and can be easily built at low cost. In order to plan and control the paths of end-effector, two interpolation methods are introduced and compared. Since the robot is entirely based on cable tension, an analysis of tension is also presented for monitoring and planning purpose.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.28-34
• /
• 2016

When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.

• 로봇학회논문지
• /
• 제11권2호
• /
• pp.73-82
• /
• 2016

This paper focuses on the vibration analysis of planar cable-driven parallel robots on their configurations. Despite of many advantages of the cable robots, elasticity of the cables may cause the vibration at the existence of external disturbance, resulting in deterioration of positioning accuracy. According to the vibration theory, having high first order natural frequency can prevent resonance with low frequency disturbance from the surrounding environment. A series of simulations showed that choosing frame / end-effector shape and cable connection method affects robots' natural frequency. For the precise simulation, the cables are modeled as linear springs and axial vibration of cables is mainly considered. Aspect ratios of the frame and end-effector are defined as non-dimensional parameters while their areas are fixed. It was shown that vibration analysis guides to design a planar cable robot in terms of high capacity to reduce vibration.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.934-940
• /
• 2006

The aims of this study is to develop working robot for a installed trolley cable of an electric train and objective of this paper is to implement mobile control of working robot. In this paper an approach to method for scheme of a mobile control system is presented in a dynamic hybrid velocity/tension control of working robot. The working robot is composed the velocity and tension controllers using the concept of two-degrees-of-freedom servo-controller. This robot moved at same time a certain distance to constrain a constant tension and installed a trolley cable of an electric train. To move the robot the velocity control system have design and implemented. Simulation and experimental results are presented to illustrate the validity of designed mobil scheme.

• 로봇학회논문지
• /
• 제7권2호
• /
• pp.83-91
• /
• 2012

In this paper, we propose a cable climbing robot which can climb up and down the cables in the bridges. The robot mechanism consists of three parts: a wheel based driving mechanism, adhesion mechanism, and safe landing mechanism. The wheel based driving mechanism is driven by tooth clutches and motors. The adhesion mechanism plays the role of maintaining adhesion force by a combination of pantograph, ball screw, and springs even when the power is lost. The safe landing mechanism is developed for guaranteeing the safety of the robot during operations on cables. It can make the robot fall down with reduced speed by dissipating the gravitational forces. The robot mechanism is designed and manufactured for validating its effectiveness.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권1호
• /
• pp.74-79
• /
• 2020

케이블지지 교량 건설의 증가로 인하여 이러한 시설물의 안전 점검에 대한 관심도 점차 증가하고 있다. 케이블지지 교량에서는 주 부재인 케이블의 성능 평가가 필수적으로 이루어져야 함에 불구하고, 기존의 점검 방식으로는 다양한 제한적인 요인 때문에 적절한 점검이 이루어지지 못하고 있는 실정이다. 이러한 문제점을 보완하기 위해 케이블 점검 로봇 제작이 필요하고, 본 연구에서는 기존의 개발된 케이블 점검 로봇의 성능을 향상시켜서 로봇의 운용 효율성을 높이는데 주목적을 두었다. 성능 보완 요소로는 대 구경 케이블(>200mm)에도 적용할 수 있도록 로봇의 가용범위를 조절할 수 있도록 하였으며, 주행능력도 향상시켜 점검의 효율성을 향상시켰다. 케이블의 내부 손상을 점검하기 위해 전자기센서를 탑재하였고, 실내 실험을 통해 다양한 케이블 손상 유형에 따른 손상 검출 시험을 실시하였다. 추가로 현재 공용중인 교량에서 현장 성능평가를 실시하였다. 그 결과로 본 연구에서 개발된 케이블 점검 로봇은 주행속도에서는 ~0.2m/s로 기존의 점검 로봇에 비해 향상된 주행 능력을 보였으며, 케이블 내부 손상 점검 실험에서는 케이블 손상 부분을 검출을 할 수 있었다. 마지막으로, 케이블 점검 로봇의 현장 검증 실험에서는 실내 실험과 같은 성능을 보이는 것을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.39-42
• /
• 2007

It is necessary to estimate the dynamic characteristics of stay cables ie., the natural frequencies and the damping ratios of the stay cables to design cable damper for appropriate mitigation of cable vibrations and/or to estimate the tension of cables in service. In this study, a cable exciting robot for evaluating dynamic characteristics of stay cables has been developed, and the feasibility of the developed system has been demonstrated through a field test on the stay cable installed at the test yard of Highway and Transportation Technology Institute (HTTI). The dynamic characteristics of the stay cable were estimated based on acceleration data as well as displacement measured by digital image processing technique.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.60-67
• /
• 2014

본 연구에서는 사장교의 핵심부재인 케이블 점검을 위한 자동화 검사 시스템을 개발하였다. 강자성체로 이뤄진 연속체 구조물인 케이블의 내외부 검사에 적합한 비파괴검사법으로는 선행연구를 통해 검증된 누설자속탐상법이 적용되었고, 홀센서와 영구자석을 이용하여 다채널의 누설자속 측정용 자기센서헤드를 제작하였다. 또한 케이블 검사의 자동화로 접근성을 높이기 위해 사장교 케이블을 따라 이동할 수 있는 바퀴굴림 방식의 케이블 등반 로봇을 설계 및 제작하였고, 로봇을 다양한 디바이스에서 모니터링 및 제어하기 위한 컨트롤 프로그램을 제작하였다. WLAN 방식의 무선통신기술을 적용하여 원격으로 계측 데이터 전송 및 로봇제어를 가능하게 하였다. 최종적으로 본 연구를 통해 개발된 세부 기술들이 연동된 누설자속탐상법 기반 케이블 이동형 진단 시스템을 이용하여 실제 운용중인 서해대교의 케이블을 대상으로 현장 시험을 수행함으로써 본 시스템의 현장 적용성을 검증해보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.455-457
• /
• 2007

The objective of this study is development of a installed working robot for a troy cable with mobile and tension system. In this paper, an approach to designing controllers for dynamic hybrid Tension/Mobile control of a installed robot for a troy wire cable is presented. Mobile control system of robot is designed based on equation of dc motor and motion for moving robot and tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a wire cable. The control parameters is determined by simulation in independence operation of two system.

• 산업기술연구
• /
• 제22권B호
• /
• pp.251-260
• /
• 2002

In this thesis, a three degrees of freedom robot, which is able to provide sufficient precision for various robot researches, has been developed. The cable mechanism is used as a basic transmission of robot joints. Based on an optimal design strategy, link and joint parameters are determined and then overall geometry of the robot is designed. As an architecture of robot control, real time control system using real time linux and RtiC-Lab(Real Time Controls Laboratory) is developed. This system, written in C and based on Linux O/S, includes text editor, compiler, downloader, and real time plotter running in host computer for developing control purpose. Using these hardware and software, simple PD position control is implemented, the results shows the effectiveness of the system.