• 한국경영과학회지
• /
• 제5권1호
• /
• pp.39-51
• /
• 1980

This paper deals with the problem of determining the capacity expansion timing and sizes of conduits and feeder cables for a given cable network configuration of a single exchange ares, which minimizes the present worth of total costs. The planning horizon is infinite and the demand of line pairs at each cabinet is assumed to be determininstically growing. As a solution method, the heuristic branch-and-bound algorithm of Freidenfelds and Mclaughlin is elaborated by adding details and some minor modifications, which generates a good near-optimal solution with far less computation than would otherwise be possible. We also develop a computer program, which is shown to be effective and efficient through the test run of an illustrative example.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.464-464
• /
• 1991

We address the problem of designing a physical CATV network with switched-star topology in which the broadband interactive service is provided. There are two types of decision variables: One is where to place conduit paths, and the other is how many cable units to be installed on each link traversed by an established conduit path. Due to the serious drawback of the conventional approach partitioning the problem into two subproblems, the unified approach handled in one setting is used here to attack the whole problem without dividing into two ones. In this paper, we present a mathematical design model and propose an efficient solution method exploiting the nice structure of it. In addition to this physical design, some results on logical network configuration have also been made. Finally, computaional experiments are conducted to illustrate the efficiency of our design approach.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.355.1-355
• /
• 2002

Topology optimization is widely accepted as a conceptual design tool for the product design. Since the resulted layout of the topology optimization is a kind of digital images represented by the density distribution, the seamless process is required to transform digital images to the CAD model for the practical use. In this paper, the general process to construct a CAD model is developed to apply for topology images based on elements. (omitted)

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.51-73
• /
• 2014

A three-dimensional finite element model for the Jiashao Bridge, the longest multi-span cable-stayed bridge in the world, is established using the commercial software package ANSYS. Dynamic characteristics of the bridge are analyzed and the effects of structural system measures including the rigid hinge, auxiliary piers and longitudinal constraints between the girders and side towers on the dynamic properties including modal frequency, mode shape and effective mass are studied by referring to the Jiashao Bridge. The analysis results reveal that: (i) the installation of the rigid hinge significantly reduces the modal frequency of the first symmetric lateral bending mode of bridge deck. Moreover, the rigid hinge significantly changes the mode shape and effective mass of the first symmetric torsional mode of bridge deck; (ii) the layout of the auxiliary piers in the side-spans has a limited effect on changing the modal frequencies, mode shapes and effective masses of global vibration modes; (iii) the employment of the longitudinal constraints significantly increases the modal frequencies of the vertical bending modes and lateral bending modes of bridge deck and have significant effects on changing the mode shapes of vertical bending modes and lateral bending modes of bridge deck. Moreover, the effective mass of the first anti-symmetric vertical bending of bridge deck in the longitudinal direction of the fully floating system is significantly larger than that of the partially constrained system and fully constrained system. The results obtained indicate that the structural system measures of the multi-span cable-stayed bridge have a great effect on the dynamic properties, which deserves special attention for seismic design and wind-resistant design of the multi-span cable-stayed bridge.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.28-36
• /
• 2018

자가발전 도서는 내연발전 혹은 PV 발전을 이용하여 전력을 공급하고 있는데, 해양환경에 의한 문제점(경년열화, 염해), 환경오염(매연, 소음, 분진) 및 발전비용(설치비, 유지관리비) 상승 등 전력공급 효율성에 대한 문제점이 대두되고 있다. 한전에서 전력공급을 담당하고 있는 65개 자가발전 도서지역의 2016년 원가회수율은 27%에 불과하며 원가의 73%에 달하는 결손액이 발생되고 있다. 이들 도서지역에서 발생한 결손액의 현황을 보면, 발전분야에서 발생하는 비용은 전체의 91% 정도를 차지하고 있고 운영비용인 변동비(연료비)와 고정비(지급수수료, 수선유지비, 기타비용) 중에서 고정비가 차지하는 비율은 60% 정도이다. 즉, 도서지역 발전효율을 향상시키고 운영체계를 효율화시키는 최적 전력공급방안을 마련하여 운영 결손액을 줄일 필요가 있다. 그러므로 거리상 가까운 여러 개의 도서 발전설비를 한 곳으로 통합하고, 인근 도서지역 간 전력공급에 해저케이블을 이용하면 연료 수송 및 설비 유지관리의 간결화를 도모할 수 있다. 따라서, 본 논문에서는 통합운영 경제성 평가를 통하여, 내연발전 및 PV 발전으로 운영되고 있는 근거리 도서간 통합운영에 유효한 해저케이블 포설 방안(1회선, 2회선, 1회선 루프)을 결정하는 알고리즘을 제시한다. 또한, 제안한 알고리즘을 바탕으로 자가발전도서의 독립운전방식과 비교 분석한 결과, 근거리이며 내연발전으로 운영되나 최대부하가 작은 2개 혹은 3개 도서에 있어서 도서간 통합운영이 경제적인 전력공급방안임을 확인하였다.

• 한국해양공학회지
• /
• 제33권3호
• /
• pp.205-213
• /
• 2019

Recently, because of the global recession of the offshore plant industry and low-cost orders, there has been increasing interest in strengthening the competitiveness of domestic companies for the design and production technologies of offshore plants. However, in the offshore plant design field, the Plant Design Management System (PDMS), which is a 3D CAD program for plant layout developed by AVEVA Marine, is already commonly used as offshore plant design software and widely used in large domestic shipyards and cooperative design companies. Under this background, we have been thinking about ways to design better with the existing software. In this study, we developed a parametric design program to maximize the efficiency and reduce the working time for offshore plant electrical outfit production design based on the Programmable Macro Language (PML) of PDMS. We also examined its performance. By applying the developed program to the offshore plant module selected as an application example, it was confirmed that a 50% improvement in the work efficiency of cable tray design could be obtained compared with the existing method, with work efficiency improvements of 80% or more in other field design work.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.162-169
• /
• 2000

This study was carried out to develop a continuously variable-speed transmission(CVT) for agricultural tractor. A full-toroidal CVT mechanism with four discs and six rollers was selected as a device for changing speed ratio continuously. In the step of system layout design, the sizes of roller cylinders and end-load cylinder, which were critical factors for controlling the variator, were designed. Also the control pressure range was designed to limit the contact pressure of variator. In order to make the maximum speed of vehicle as 30km/h, the planetary gear and the six pairs of gears were designed. Also the hydraulic clutch, silent chain, hydraulic manifold and electronic controller were designed. After the design, a prototype with CVT controller was developed and tested. The speed of vehicle was changed continuously to the speed set by driver and the settling time was about 0.52 second at the step-response test (reduction ratio of variator 2.0 to 1.0), which was acceptable as a response time for working with tractor.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.595-609
• /
• 2022

Prestressed composite steel-concrete beams are still a technology restricted to repair sites of large-scale structures and spans. One of the reasons for that is the absence of standard frameworks and publications regarding their design and implementation. In addition, the primary normative codes do not address this subject directly, which might be related to a scarcity of papers indicating methods of design that would align the two technics, composite beams and external prestressing. In this context, this paper proposes methods to analyze the sizing of prestressed composite beams submitted to pre-tension and post-tension with a straight or polynomial layout cable. This inquiry inspected a hundred and twenty models of prestressed composite beams according to its prestressing technology and the eccentricity and value of the prestressing force. The evaluation also included the ratio between span and height of the steel profile, thickness and typology of the concrete slab, and layout of the prestressing cables. As for the results, it was observed that the eccentricity of the prestressing force doesn't significantly influence the bending resistance. In prestressed composite beams subjected to a sagging moment, the ratio L/d can reach 35 and 30 for steel-concrete composite slabs and solid concrete slabs, respectively. Considering the negative bending moment resistance, the value of the L/d ratio must be less than or equal to 25, regardless of the type of slab. When it comes to the value of the prestressing force, a variation greater than 10% causes a 2.6% increase in the positive bending moment resistance and a 4% decrease in the negative bending moment resistance. The pre-tensioned composite beams showed a superior response to flexural-compression and excessive compression limit states than the post-tensioned ones.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.387-401
• /
• 2016

This paper takes a half-through steel truss arch bridge as an example. A seismic analysis is conducted with nonlinear finite element method. Contrast models are established to discuss the effect of simplified method for main girder on the accuracy of the result. The influence of seismic wave direction and wave-passage on seismic behaviors are analysed as well as the superstructure and arch ring interaction which is mostly related with the supported bearings and wind resistant springs. In the end, the application of cable-sliding aseismic devices is discussed to put forward a layout principle. The main conclusions include: (1) The seismic response isn't too distinctive with the simplified method of main girder. Generally speaking, the grillage method is recommended. (2) Under seismic input from different directions, arch foot is usually the mostly dangerous section. (3) Vertical wave input and horizontal wave-passage greatly influence the seismic responses of arch ring, significantly increasing that of midspan. (4) The superstructure interaction has an obvious impact on the seismic performance. Half-through arch bridges with long spandrel columns fixed has a less response than those with short ones fixed. And a large stiffness of wind resistant spring makes the the seismic responses of arch ring larger. (5) A good isolation effectiveness for half-through arch bridge can be achieved by a reasonable arrangement of CSFABs.

• Journal of Forest and Environmental Science
• /
• 제24권1호
• /
• pp.1-14
• /
• 2008

Clearcutting has been the dominant harvesting method in British Columbia (representing 95% of the total area harvested annually). However forest managers are increasingly recommending the use of alternative silvicultural systems and harvest methods, including various types of partial cutting, to meet ecological and social objectives. In this study we compared harvesting productivity and harvesting costs between treatments through detailed and shift level time studies in 300-350 year-old Interior Cedar-Hemlock stands in British Columbia, Canada. Recommendations for improving operational planning/layout and the implementation of clearcut and partial cutting silvicultural systems were made. Harvesting costs varied in the ground-based clearcut treatments from $10.95/$m^3$ - $15.96/$m^3$ and $16.09/$m^3$ - $16.93/$m^3$ in the group selection treatments. The ground-based group retention treatment had a cost of $13.39/$m^3$, while the cable clearcut had a cost of $15.70/$m^3$. An understanding of the traditional and alternative wood products that could be derived from the harvested timber was imperative to increasing the amount of merchantable volume and reducing the corresponding harvesting costs. Stand damage was greatest in the group selection treatments; however, mechanized felling showed an increase in stand damage over manual felling while grapple skidding showed a decrease in skidding damage compared to line skidding.