• 제목/요약/키워드: c-expansive

검색결과 64건 처리시간 0.024초

팽창재 및 수축저감제를 사용한 초고성능 콘크리트의 양생조건별 역학 및 자기수축 특성 (Mechanical Properties and Autogenous Shrinkage of Ultra High Performance Concrete Using Expansive Admixture and Shrinkage Reducing Agent depending on Curing Conditions)

  • 박천진;한민철
    • 한국산학기술학회논문지
    • /
    • 제16권11호
    • /
    • pp.7910-7916
    • /
    • 2015
  • 본 연구에서는 팽창재 및 수축저감제 사용량 변화에 따른 초고성능 콘크리트(UHPC)의 양생조건별 역학적 특성 및 자기수축 특성에 대해 검토하였다. 그 결과 양생조건에 따른 UHPC의 역학적 특성으로 $90^{\circ}C$ 증기양생을 한 시험체는 모두 190 MPa 이상의 압축강도를 나타냈고 $20^{\circ}C$ 수중양생을 한 경우에는 재령 91일에서 증기양생을 한 시험체와 동등한 수준으로 발현되었다. 인장강도는 $90^{\circ}C$ 증기양생의 경우 23.4 MPa의 높은 수준으로 나타났으며 $20^{\circ}C$에서는 다소 저하하였다. 자기 수축 특성으로 양생조건에 따른 최종 수축량의 변화는 나타나지 않았다. 팽창재 및 수축저감제 사용에 따른 UHPC의 압축강도는 $90^{\circ}C$ 증기양생을 한 경우 190 MPa 이상 발현하였다. 자기수축 특성은 팽창재와 수축저감제를 복합 사용한 경우 약 45% 정도 수축저감 효과가 있는 것으로 나타났고 양생조건에 따른 차이는 발생하지 않았다.

Influence of moisture content on main mechanical properties of expansive soil and deformation of non-equal-length double-row piles: A case study

  • Wei, Meng;Liao, Fengfan;Zhou, Kerui;Yan, Shichun;Liu, Jianguo;Wang, Peng
    • Geomechanics and Engineering
    • /
    • 제30권2호
    • /
    • pp.139-151
    • /
    • 2022
  • The mechanical properties of expansive soil are very unstable, highly sensitive to water, and thus easy to cause major engineering accidents. In this paper, the expansive soil foundation pit project of the East Huada Square in the eastern suburb of Chengdu was studied, the moisture content of the expansive soil was considered as an important factor that affecting the mechanics properties of expansive soil and the stability of the non-equal-length double-row piles in the foundation pit support. Three groups of direct shear tests were carried out and the quantitative relationships between the moisture content and shear strength τ, cohesion c, internal friction angle φ were obtained. The effect of cohesion and internal friction angle on the maximum displacement and the maximum bending moment of piles were analyzed by the finite element software MIDAS/GTS (Geotechnical and Tunnel Analysis System). Results show that the higher the moisture content, the smaller the matrix suction, and the smaller the shear strength; the cohesion and the internal friction angle are exponentially related to the moisture content, and both are negatively correlated. The maximum displacement and the maximum bending moment of the non-equal length double-row piles decrease with the increase of the cohesion and the internal friction angle. When the cohesion is greater than 33 kPa or the internal friction angle is greater than 25.5°, the maximum displacement and maximum bending moment of the piles are relatively small, however, once crossing the points (the corresponding moisture content value is 24.4%), the maximum displacement and the maximum bending moment will increase significantly. Therefore, in order to ensure the stability and safety of the foundation pit support structure of the East Huada Square, the moisture content of the expansive soil should not exceed 24.4%.

칼슘 설포알루미네이트계 팽창재를 혼합한 시멘트 경화체의 내해수성(I) (Resistance to Sea Water of Hardened Cement with Calcium Sulfoaluminate Type Expansive Additives(I))

  • 전준영;송종택
    • 한국세라믹학회지
    • /
    • 제40권3호
    • /
    • pp.234-240
    • /
    • 2003
  • 보통 포틀랜드 시멘트에 CSA계 팽창재를 l0 wt% 혼합한 시멘트 경화체를 MgS $O_4$. 7$H_2O$ l0 wt%로 제조된 용액에 침지시켜 물성을 측정하였다. 재령의 경과에 따라서 압축강도, 수화생성물 및 미세구조변화를 관찰한 결과 천연원료로 제조된 CSA계 팽창재[No. 6(C/(equation omitted) : 2.29, A/(equation omitted) : 0.16)]는 초기에 미세한 에트링자이트 생성 및 후기에는 $\beta$-C$_2$S의 수화 반응으로 경화체가 치밀화되어 OPC 보다 $Mg^{2+}$, S $O_4$$^{2-}$ 이온의 확산에 대한 저항성이 증가되었다.

우레탄계 해체성 접착제의 해체특성에 관한 연구 (Studies on Dismantlement Property of Dismantlable Polyurethane Adhesive)

  • 김동호;정일두;김구니
    • 접착 및 계면
    • /
    • 제11권1호
    • /
    • pp.26-34
    • /
    • 2010
  • 가열에 의해 해체가 가능한 열적특성을 갖는 폴리우레탄 접착제를 합성하였으며 열팽창비드를 혼합하여 해체성 접착제를 제조하였다. Dynamic mechanical thermal analyzer (DMA)를 사용하여 폴리우레탄의 열적특성을 확인하였고 접착강도와 열팽창비드의 함량, 가열 trigger의 종류와 처리조건에 따른 해체특성을 연구하였다. 열풍과 microwave 처리에 의해서 해체성 폴리우레탄 접착제의 부피팽창에 따른 접착된 시편의 해체가 가능하였으며, 열팽창비드의 함량이 증가될수록 접착된 피착재가 더 쉽게 분리되었다. 해체성 접착제에서 접착력과 해체특성 모두를 만족시킬 수 있는 가장 적합한 열팽창비드 사용량은 40%이였으며, 가열 trigger로 열풍을 사용한 경우에는 $160^{\circ}C$, 30 min의 조건에서, 가열 trigger로 microwave를 사용한 경우에는 조사시간 4 min의 조건에서 접착되어 있는 피착재가 완전히 해체되었다.

산업폐기물을 이용한 CSA계 팽창재 제조 및 응용 (Preparation and Application of CSA Expansive Additives Using Industrial Wastes)

  • 윤성원;노재성
    • 콘크리트학회논문집
    • /
    • 제16권3호
    • /
    • pp.369-374
    • /
    • 2004
  • $C_4A_3S$ 합성은 천연원료인 석회석과 산업폐기물 및 부산물인 수산화알루미늄, 이수석고를 일정혼합비로 균일하게 혼합하여 20, 400, 600, $1200^{\circ}C$에서 1시간 소성 후 급냉하여 $C_4A_3S$ 클링커를 합성하였다. 합성한 클링커를 보통 포틀랜드 시멘트에 10 wt%치환하여 수중 양생하에서 수화반응 및 물성특성을 조사하였다. $1200^{\circ}C$에서 $C_4A_3S$ 클링커가 합성됨을 X-Ray diffraction pattern으로 관찰할 수 있었다 $1200^{\circ}C$에서 소성된 시료는 급결성을 띠었으며, 압축강도는 보통 포틀랜드 시멘트보다 20~30% 정도 높게 나타났다. 주요 수화생성물은 ettringite, 수산화 칼슘이며, ettringite의 팽창으로 인하여 모르타르의 건조수축이 보통 포틀랜드 시멘트보다는 낮게 나타났다.

MgO계 내화물이 함유된 팽창성 지반에서의 모형말뚝 거동 분석 (Behavior of Model Pile Embedded in Expansive Soil with Magnesia Oxide-Based Refractories)

  • 윤보영;김민태
    • 한국지반공학회논문집
    • /
    • 제39권11호
    • /
    • pp.33-40
    • /
    • 2023
  • 본 연구에서는 산화마그네슘계 내화물(Magnesium oxide-based refractory)을 함유한 팽창성 지반에서의 말뚝기초 거동을 분석하였다. 고정단 말뚝이 설치된 모형토조에 용융마그네시아(Fused magnesia, FM)를 활용하여 지반의 융기를 유도하였으며, FM함유량(FMc = 30%, 50%, 70%)을 변화하여 시간에 따른 깊이별 융기량과 말뚝의 축력을 분석하였다. FMc가 증가할수록 더 큰 융기량이 측정되었으며, 시료의 표면으로 갈수록 융기량이 누적되어 깊이에 따라 융기량이 감소하였다. 그러나 깊이별 융기율의 차이와 그에 따른 팽창압의 차이로 인하여 FMc = 30%와 50%일때 말뚝에 뚜렷한 압축력과 인장력이 발현되었으며, FMc = 70%일 때에는 말뚝 전체에 인장력만이 발현되었다. 이런한 결과는 산화마그네슘계 내화물이 포함된 혼합토 내의 말뚝거동을 분석하는데 중요한 자료로 활용할 수 있을 것으로 판단된다.

SOME FIXED POINTS FOR EXPANSIVE MAPPINGS AND FAMILIES OF MAPPINGS

  • Liu, Z.;Feng, C.;Kang, S.M.;Kim, Y.S.
    • East Asian mathematical journal
    • /
    • 제18권1호
    • /
    • pp.127-136
    • /
    • 2002
  • In this paper we obtain some fixed points theorems of expansive mappings and several necessary and sufficient conditions for the existence of common fixed points of families of self-mappings in metric spaces. Our results generalize and improve the main results of Fisher [1]-[5], Furi-Vignoli [6], $Is\'{e}ki$ [7], Jungck [8], [9], Kashara-Rhoades [10], Liu [13], [14] and Sharma and Strivastava [16].

  • PDF

PRESERVATION OF EXPANSIVITY IN HYPERSPACE DYNAMICAL SYSTEMS

  • Koo, Namjip;Lee, Hyunhee
    • 대한수학회지
    • /
    • 제58권6호
    • /
    • pp.1421-1431
    • /
    • 2021
  • In this paper we study the preservation of various notions of expansivity in discrete dynamical systems and the induced map for n-fold symmetric products and hyperspaces. Then we give a characterization of a compact metric space admitting hyper N-expansive homeomorphisms via the topological dimension. More precisely, we show that C0-generically, any homeomorphism on a compact manifold is not hyper N-expansive for any N ∈ ℕ. Also we give some examples to illustrate our results.

ON STRONG EXPONENTIAL LIMIT SHADOWING PROPERTY

  • Darabi, Ali
    • 대한수학회논문집
    • /
    • 제37권4호
    • /
    • pp.1249-1258
    • /
    • 2022
  • In this study, we show that the strong exponential limit shadowing property (SELmSP, for short), which has been recently introduced, exists on a neighborhood of a hyperbolic set of a diffeomorphism. We also prove that Ω-stable diffeomorphisms and 𝓛-hyperbolic homeomorphisms have this type of shadowing property. By giving examples, it is shown that this type of shadowing is different from the other shadowings, and the chain transitivity and chain mixing are not necessary for it. Furthermore, we extend this type of shadowing property to positively expansive maps with the shadowing property.

산업부산물을 이용한 CSA계 팽창시멘트의 제조 및 특성 (Preparation and Properties of CSA Type Expansive Cement Using Industrial By-products)

  • 송종택;조진상;전준영
    • 한국세라믹학회지
    • /
    • 제38권2호
    • /
    • pp.183-192
    • /
    • 2001
  • 산업부산물을 이용하여 3CaO.3Al$_2$O$_3$.CaSO$_4$(C$_4$A$_3$S) 클링커를 합성하였다. 이때, 원료 물질은 산업부산물로 플라이 애쉬, 고로 수쇄 및 괴재슬래그를 $Al_2$O$_3$원으로 그리고 부산석고를 SO$_3$원으로 이용하였으며, CaO원으로 천연석회석을 사용하였다. 제조된 $C_4$A$_3$S 클링커를 CaSO$_4$, CaO를 배합하여 CSA계 팽창재를 제조하였으며, 일반 포틀랜드 시멘트(OPC)에 10 wt.% 첨가하여 수화 및 물성 특성을 조사하였다. 주요 수화생성상은 에트링자이트 및 수산화칼슘이었다. 수화시 에트링자이트의 생성으로 인해 팽창 및 경화체가 치밀화되어 건조수축이 감소되었고, 강도(압출, 인장, 휨)가 향상되었다.

  • PDF