• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.579-585
• /
• 2017

Acrylic resins containing tertiary amine were synthesized by a radical polymerization of monomers including n-butyl acrylate (BA), methyl methacrylate (MMA), n-butyl methacrylate (BMA) and dimethylaminoethyl methacrylate (DMAEMA), and diethylaminoethyl methacrylate (DEAEMA) containing tertiary amine. Synthesized acrylic resins were applied to develope coatings of acrylic resins containing tertiary amine. And ${\gamma}$-glycidoxypropyl trimethoxysilane (GPTMS) or ${\gamma}$-glycidoxypropyl triethoxysilane (GPTES) was used as hardener. Developed coatings were white colored ones to use titanium dioxide and were hardened with hardener for measuring their physical properties. Measured physical properties were basic properties, adhesivity and weatherability. As a result, developed acrylic resins coatings containing tertiary amine showed excellent adhesivity on various substrates and also showed the same result on weatherability on dry weather condition.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.338-342
• /
• 1987

8-tert-Butyl-6,7-dihydro-5-methyl-8H-pyrrolo [3,2-e]-s-triazolo [1,5-a] pyrimidine (Bumepidil), one of the s-triazolo [1,5-a] pyrimidine derivatives, has been recently found to be the most promising potential coronary vasodilator and antihypertensive agent. In this report, a new synthetic approach for Bumepidil, via direct N-amination of amino pyrimidine intermediate, was studied and found to be useful method. The novel synthetic method comprise the following steps, acylation of $\gamma$-butyrolactone, condensation with guanidine, direct N-amination, cyclization, chlorination, and finally cyclization using tert-butyl amine.

• Journal of the Korean Chemical Society
• /
• v.40 no.11
• /
• pp.681-685
• /
• 1996

New 6-cyanomethyl-1,3,5-triazine derivatives 4 containing amino, n-propylamino, isopropylamino and anilino groups at 2-and 4-position on the 6-cyanomethyl-1,3,5-triazine ring were prepared from 6-chloro-l,3,5-triazine derivatives 2' and 3 with tert-butyl cyanoacetate. The derivatives of 6-chloro-l,3,5-triazine 2' and 3 containing amino, n-propylamino, isopropylamino and anilino groups at 2- and 4-position on the 6-chloro-1,3,5-triazine ring were prepared from 2,4,6-trichloro-1,3,5-triazine as well as 4,6-dichloro-1,3,5-triazine derivatives 2 with amine derivatives.

• YAKHAK HOEJI
• /
• v.50 no.5
• /
• pp.326-331
• /
• 2006

We designed and synthesized new benzylpiperidinyl ether derivatives as beta-amyloid aggregation inhibitors for the development of novel anti-Alzheimer's disease agents. As starting material, 4-hydroxypiperidine was used. For protection of the amine group in piperidine (2), di-tert-butyl dicarbonate was reacted with 4-hydroxypiperidine in the presence of triethylamine. For introduction of benzyl group, benzylbromide was treated with compound 2 in dioxane. After deprotection of Boc group on amine in compound 3, ester (5) was synthesized by addition of ethyl-4-chlorobutyrate. The alcohol 6 was synthesized by hydride reduction of 5 using $LiAlH_4$. To obtain final products (7-14), the alcohol 6 was condensed with each of substituted benzoic acids. To screen beta-amyloid aggregation inhibition of the products, thioflavinT assay was performed using $A{\beta}1-42\;at\;37^{\circ}C$ for 26 h incubation, in vitro. From the result of screening, compound 8, 9, 11 and 12 showed effective activity about $65{\sim}85\;{\mu}M\;as\;IC_{50}$ value. Among the prepared compounds, 4-[4-(benzyloxy)piperidino]butyl-4-chlorobenzoate (8) was the most effective inhibitor having $IC_{50}\;of\;65.4{\mu}M$.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.639-648
• /
• 2015

Some materials of fatty acids in the biodiesel affect the physical/chemical properties like density, kinematic viscosity, total acid number and oxidation stability by forming an organic fatty acid in combination with oxygen in the air. To solve the problem of the oxidative stability of biodiesel, various kinds of antioxidant has added and analyze the characteristics of the physical/chemical property changes by the addition of antioxidant. Oxidation stability increased by the increase of additives content. The TBHQ among the seven kinds of the additives showed the best performance. Also, 4 kinds of additives like propyl gallate, butyl-amine and pyrogallo has showed above 10 hr of oxidation stability at the addition of 500 ppm. In case of pyrogallo, this is not appropriate as an additive to suitable quality standards of total acid number. TBHA, DTBHQ of hydroquinone was satisfied with the quality standard of oxidation stability but the target of this research(above 10 hr) did not satisfied with oxidation stability. Propyl gallate is also a suitable at the quality standards of total acid number but it was shown not to be an appropriate to the additives due to increasing the total acid number by increasing of the content of additives at the addition of 500 ppm.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.135-141
• /
• 2002

The new tridentate poly-amine ligands, N,N-Bis(2-amino-ethyl)-methyl amine${\cdot}$2HBr (BAMA${\cdot}$2HBr), N,N-Bis(2-amino-ethyl)-ethylamine${\cdot}$2HBr (BAEA${\cdot}$2HBr), N,N-Bis(2-amino-ethyl)-propylamine${\cdot}$2HBr (BAPA${\cdot}$2HBr) and N,N-Bis(2-amino-ethyl)-butylamine${\cdot}$2HBr (BABA${\cdot}$2HBr) were synthesized as their dihydrobromic-salt and characterized by EA, IR, NMR and Mass spectroscopy. The protonation constants of the ligands and stability constants of transition metal(II) complexes were determined in aqueous solutions by potentiometry and compared with diethylenetriamine. Stability constants for transition metal complexes of ligands are in the order of BAMA < BAEA < BAPA > BABA. The larger value of stability constants of BAPA compared to these BABA, may be attributed to the more distorted structure of the complex due to the increased steric crowding caused by the presence of the bulky N-butyl group.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.172-176
• /
• 2009

In this research, we defined the basic structure of soft etching material as $H_2SO_4/H_2O_2$, and used additives as inhibitor, surfactant, and stabilizer. By analyzing influence to surface roughness and change of etching rate related to type and density of additives, we research to develop soft etching material having the same adhesiveness as existing etching material. As a result of research, it is estimated that after densities of $H_2O_2$ and $H_2SO_4$ are 3%, 4% respectively, 500 ppm of amine type 5-Azol, as inhibitor, and 600 ppm of PEI, as surfactant, and 10 ppm of phosphoric acid, as stabilizer, are added, is the most reasonable surface roughness and etching rate. As result of solder test, it is estimated that solder resist ink did not peel away or curl up and have reliable adhesiveness.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.160-164
• /
• 2007

Aminofuroxan derivatives 3 and 4 were prepared by the reaction of chlorofuroxan 2 with butyl and benzyl amines, respectively. E-beam mediated fragmentation of aminofuroxans 3, 4 in mass spectrometer was analyzed in a view of the corresponding alkyne formation.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.27-32
• /
• 2007

In this study, the concentrations of offensive odorous compounds seasonally emitted from the chemical plant at Chongju industrial complex in Korea were determined by the analytical methods of gas chromatography, high performance liquid chromatography and uv/vis spectroscopy. The kinds of offensive odorous compounds examined are formaldehyde, acetaldehyde, butyl aldehyde, propion aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide, trimethyl amine and ammonia. The seasonally emission levels of all odorous compounds except dimethyl sulfide at 13 sampling points of plant were lower than those of the regulation standard levels of the industrial complex in Korea. The levels were the highest in June, and lowest in December. The propion aldehyde and iso-valeric aldehyde in June and December, butyl aldehyde in December, and n-valeric aldehyde were not detected in all the three seasons at any sampling points of the plant examined. But in June, dimethyl sulfide was emitted up to 16 times than that of the regulation level.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2007

The concentrations of offensive odorous compounds emitted from the two chemical plants in Chongju and Yeosu industrial complex in Korea were determined by uv/vis spectroscopy, gas chromatography, and high performance liquid chromatography. The odorous compounds examined in this study are ammonia, trimethyl amine, formaldehyde, acetaldehyde, propion aldehyde, butyl aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide and dimethyl disulfide. The concentrations of those were determined from the 10 sampling points of the two plants, respectively. The emission concentrations of all odorous com-pounds examined in the two plants were lower than those of the regulation standard levels of industrial complex in Korea, respectively. The propion aldehyde, n-valeric aldehyde, methyl mercaptan and dimethyl disulfide in Chongju and Yeosu plants, and butyl aldehyde and iso-valeric aldehyde in Yeosu plant were not detected at any sampling points examined.