• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.848-854
• /
• 2009

Of the rapid development of modem civilization development is one of the IT industry. The Network is the root of the discrete industry. Most of the Protocol is used by LAN and the TCP / IP. Slowly in the railway operation of this Network is being applied. It also used to train and they are operated. The concept of the road, the Network TCP / IP using a non-Star structure of the Main Unit and the Bus Network is designed to structure consists of the Network. This structure is a simplified DATA. Data of complex operations is easy to feel the speed limit is. In addition, all devices must be independent to the operating system with the ability to manage the operation and stability in terms of exactly how the transmission of Data is gonna work pass. And transmission occurs in the middle of the Noise and the device is available to manage the power. Noise in the power of the railway to ensure the efficient transfer of Data is by blocking. Also, by presenting the entire system's operational safety should be guaranteed the safety of the railway.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.87-104
• /
• 2015

Currently the IoT (Internet of Things) environments and related technologies are being developed rapidly through the networks for connecting many intelligent objects. The IoT is providing artificial intelligent services combined with context recognition based knowledge and communication methods between human and objects and objects to objects. With the help of IoT technology, many research works are being developed using the C-ITS (Cooperative Intelligent Transport System) which uses road infrastructure and traveling vehicles as traffic control infrastructures and resources for improving and increasing driver's convenience and safety through two way communication such as bus-only lane and license plate recognition and road accidents, works ahead reports, which are eventually for advancing traffic effectiveness. In this paper, a system for deciding whether the traveling vehicle is possible or not to drive on bus-only lane in highway is researched using the lane and number plate recognition on the road in C-ITS traffic infrastructure environments. The number plates of vehicles on the straight ahead and sides are identified after the location of bus-only lane is discovered through the lane recognition method. Research results and experimental outcomes are presented which are supposed to be used by traffic management infrastructure and controlling system in future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.29-35
• /
• 2018

Safety accidents are frequently occurring in day care centers in recent years. The number of types of safety accidents is bumping into, falling, burning, school bus accident, insertion... etc., and the number of children who have died due to such accidents is increasing steadily every year. Therefore, it is urgent to prevent accidents at day care centers. IoT (Internet of Things) is managed by connecting various sensors and related products from the living space to the Internet in order to prevent them from being dangerous. In particular, IoT products can be automatically controlled by smart phones and sensors anytime and anywhere, thus saving energy, time, convenience and prompt accuracy. This paper proposes a research model to prevent and respond to disasters by using SK LoRa communication network and Arduino, which are Internet access networks for building disaster management in schools, kindergartens and day care centers. And various sensors needed for building disaster management express various safety states in the building and suggests a system that can control the residential environment by transmitting and receiving data to smart phone.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2008

Three failure cases of CNG composite vessels were reported since after January 2005. The 1st and 2nd accidents were indebted to vessel defect and installation mistake. The 3rd was caused by gas leak at pipe connections. In this paper various aspects were studied based on information of the three failure analysis, which must be improved for better safety of the CNG bus system. Overpressure region caused by vessel explosion was theoretically predicted and also assessed by PHAST program. Explosion of 120 l vessel under 20 MPa is equivalent to 1.2 kg TNT explosion. The predicted value by PHAST was more serious than theoretical one. However, actual consequence of explosion was much less than both of the predicted consequences. Since the CNG vessel was designed by the performance based design methodology, it is difficult to verify whether the required process and tests were properly conducted or not after production. If material toughness is not enough, the vessel should be weak in brittle fracture at early in the morning of winter season since the metal temperature can be lower than the transition temperature. If autofrettage pressure is not correct, fatigue failure due to tensile stress during repeated charging is possible. One positive aspect is that fire did not ocurred after vessel failure. This may be indebted to fast diffusion of natural gas which hindered starting fire.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.141-148
• /
• 2021

In some intersections or busy traffic roads, there are more pedestrians in a specific period of time, and there are many traffic accidents caused by road congestion. Especially at the intersection where there are schools nearby, it is particularly important to protect the traffic safety of students in busy hours. In the past, when designing traffic lights, the safety of pedestrians was seldom taken into account, and the identification of motor vehicles and traffic optimization were mostly studied. How to keep the road smooth as far as possible under the premise of ensuring the safety of pedestrians, especially students, will be the key research direction of this paper. This paper will focus on person, motorcycle, bicycle, car and bus recognition research. Through investigation and comparison, this paper proposes to use YOLO v4 network to identify the location and quantity of objects. YOLO v4 has the characteristics of strong ability of small target recognition, high precision and fast processing speed, and sets the data acquisition object to train and test the image set. Using the statistics of the accuracy rate, error rate and omission rate of the target in the video, the network trained in this paper can accurately and effectively identify persons, motorcycles, bicycles, cars and buses in the moving images.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.144-152
• /
• 2013

PRT(Personal Rapid Transit) system is a new transportation system which will meet increasing demands of traffic in Korea. It is also an environment-friendly transportation and automatically operated. For these reasons, researches on the PRT system are actively undergoing, but the PRT vehicles have different forms of subway, bus, etc. There are no design standards to evaluate structural integrity, yet. In this paper, Structural design specifications are derived, which are based on the performance test standard for EMU and the ASCE-APM standards. We also perform the static and fatigue analyses by FE simulation and suggest strategies to improve an initial structure design. In addition, we derived the design specifications for energy-absorbing structures to meet the conditions of the collision scenarios predefined from a view point of operation safety.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.65-80
• /
• 2005

대부분의 국가들이 노선버스의 운영을 공공부문에서 담당하고 있으나 우리나라를 비롯한 일부에서만 민간이 운영하고 있어 시민들을 위한 공익성만을 추구 할 수는 없는 입장이며 노선의 선정 또한 사업자와 공공이 협의하여 시행할 수밖에 없다. 이를 개선하기 위하여 버스노선 개편, 공동배차제 등 개선방안을 많은 지자체에서 시행하였지만 시민${\cdot}$업체${\cdot}$공공부문에서의 합의 도출은 지난한 상황이며 실행력이 없는 계획이 되고 있음을 여러 사례에서 볼 수 있다. Internet등 통신기술의 급속한 발달에 따라 통신을 통한 의사표출이 자유롭고 용이해지면서 일반지자체의 경우에 전체 민원 중 교통부문이 차지하는 민원이 $50\%$를 상회하고 있으며, 교통민원 중 $45.3\%$가 노선버스의 정시성 확보 및 운전기사의 불친절, 무정차 통과 등에 관한 것으로써 시민들이 가장 알고싶어 하는 사항이 버스의 실시간 운행상황임을 알 수 있었다. 따라서 본 연구에서는 실시간 버스정보제공을 통해 노선버스 이용자들의 대기시간 감소 및 이용편의를 증진시키고, 이를 통해 승용차 이용자를 대중교통수단으로 유도하여 대중교통을 활성화시키는 버스정보시스템(BIS ; Bus Information System)을 정립하며, 충주시 교통여건을 감안한 버스정보시스템 도입전략을 수립하고, 도입에 따른 기대효과를 분석하여 합리적이고 효과적으로 적용할 수 있는 지방자치단체 특히 충주시의 지능형 교통정보 시스템을 마련하는데 그 목적이 있다.

• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2009

The characteristics of smoke emissions from diesel heavy duty vehicles which weigh over 5.5 tons was investigated by driving the vehicles with both the Lugdown 3 modes in the chassis dynamometer and tree accelerating mode under no load. The vehicles include commercial vehicles such as bus, microbus, trucks and specialized vehicles, etc. The total numbers of the vehicles tested were 200. The light extinction method was used to measure the smoke emissions from the vehicles tail pipe. The values of the smoke emissions in the tree accelerating mode showed $0{\sim}20%$ band nearly independent of both the mileage and year of production of the tested vehicles, while those in the Lugdown 3 modes showed $0{\sim}99%$ of wide band. The correlation coefficients between the values of the smoke emissions with both the Lugdown 3 modes and the free acceleration mode were 0.12, 0.08, 0.12, respectively. The inspection with Lugdown 3 modes is better one than that with tree acceleration from the point of exact inspection of the diesel vehicles' smoke emission.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.147-156
• /
• 2009

As the result of the rapid development of IT technology, an on-line diagnostic system using the field bus communication network coupled with a smart sensor module will be widely used at the nuclear power plant in the near future. The smart sensor system is very useful for the prompt understanding of abnormal state of the key equipments installed in the nuclear power plant. In this paper, it is assumed that a smart sensor system based on the fieldbus communication network for the surveillance and diagnostics of safety-critical equipments will be installed in the harsh-environment of the nuclear power plant. It means that the key components of fieldbus communication system including microprocessor, FPGA, and ASIC devices, are to be installed in the RPV (reactor pressure vessel) and the RCS (reactor coolant system) area, which is the area of a high dose-rate gamma irradiation fields. Gamma radiation constraints for the DBA (design basis accident) qualification of the RTD sensor installed in the harsh environment of nuclear power plant, are typically on the order of 4 kGy/h. In order to use a field bus communication network as an ad-hoc diagnostics sensor network in the vicinity of the RCS pump area of the nuclear power plant, the robust survivability of IT-based micro-electronic components in such intense gamma-radiation fields therefore should be verified. An intelligent CCD camera system, which are composed of advanced micro-electronics devices based on IT technology, have been gamma irradiated at the dose rate of about 4.2kGy/h during an hour UP to a total dose of 4kGy. The degradation performance of the gamma irradiated CCD camera system is explained.