• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.386-393
• /
• 2017

Field programmable gate arrays (FPGAs) are widely used for verification in chip development. In order to verify the circuit programmed to the FPGA, data must be input to the FPGA. There are many ways to communicate with a chip through a PC and an external board, but the simplest and easiest way is to use a universal asynchronous receiver/transmitter (UART). Most recently, most circuits are designed to be internally connected to the advanced microcontroller bus architecture (AMBA) bus. In other words, to verify the designed circuit easily and simply, data must be transmitted through the AMBA bus through the UART. Also the AMBA bus has been available in various versions since version 4.0 recently. Advanced peripheral bus (APB) is suitable for simple testing. In this paper, we design a circuit for UART-to-APB interface. Circuits designed using Verilog-HDL were implemented in Altera Cyclone FPGAs and were capable of operating at speeds up to 380 MHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.1-12
• /
• 2008

Recently, the roll of bus transit is critical more than before because of the dramatical increase in congestions and oil prices, but bus companies seriously encounter into vicious circle situation such as decrease in passenger demand, income reduction, and revenue deterioration. To tackle this, major metropolitan cities, Seoul, Busan, DaeGu, etc. have introduced a semi-public system to reinforce public function of bus. However, it was resulted in side effects that the main board of bus company did not control theirselves voluntarily, and the management and control of public sectors on bus become very important elements. In this research, the types, limitations, and development of operation-management items, and a methodology for analysis, and changes in those trends are addressed under semi-public system using APTS data. Conclusively, this study could be one of the useful application results and alternatives for the operation-management policy of bus transit-related agencies.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.109-139
• /
• 2017

In light that solidarity movements become significant under the situation of 'labor and labor movement' crisis, our study pays attention to the fact that the Hope Bus campaigns made remarkable achievements, and aims to figure out how those campaigns were successful, by focusing on their solidarity networking. The successful operating conditions of solidarity networking in the Hope Bus campaigns are examined in three aspects - the conditions of triggering, forming, and activating. The solidarity networking of Hope Bus campaigns were mainly triggered by the injustice of layoffs by Hanjin Heavy Industry, aerial protest by Jin-sook Kim, and the tragic symbol of the protest site (Crane no. 85). The solidarity movement of Hope Bus could be formed by the mutual trust and cohesive team-building of key network brokers, their utilization and expansion of social movement networks, and massive ripple effect of SNS-mediated communication. The solidarity networking of Hope Bus was effectively activated by open and de-hierarchical operations of the central planning group, active solidarity activities of participant groups, and the provision of 'heuristic experience' for developing the sensibility to labor solidarity. The virtuous combination of those three operating conditions leads to the building of unified forces among social movements, massive civil participation, and meaningful movement outcomes, through the solidarity networking of Hope Bus campaigns.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.145-148
• /
• 1992

The best index should show the margins to the operating limit at the present operating point without much efforts. Such voltage collapse proximity index has been proposed in this study. Differently from the normal procedure in which every bus load is increased at the same propotion, bus load increase toward the direction of T/L loss increase has been applied in this study. Sample studies show the usefulness and the practical applicability in voltage stability analysis.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.826-840
• /
• 2018

This paper presents a distributed maximum power point tracking (DMPPT) algorithm based on the reference voltage perturbation (RVP) method for the PV modules of a series PV string. The proposed RVP-DMPPT algorithm is developed to accurately track the maximum power point (MPP) for each PV module operating under all atmospheric conditions with a reduced hardware overhead. To study the influence of parameters such as the controller reference voltage ($V_{ref}$) and PV current ($I_{pv}$) on the PV string voltage, a small signal model of a unidirectional differential power processing (DPP) based PV-Bus architecture is developed. The steady state and dynamic performances of the proposed RVP DMPPT algorithm and small signal model of the unidirectional DPP based PV-Bus architecture are demonstrated with simulations and experimental results. The accuracy of the RVP DMPPT algorithm is demonstrated by obtaining a tracking efficiency of 99.4% from the experiment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.1-9
• /
• 2009

Bus information system(BIS), as a part of the intelligent transportation system(ITS), is one of the most advanced public transportation systems which provide the real-time bus traffic information for the users waiting the buses at the bus stop. However, correct bus information data, such as the present bus location, the user waiting time, the bus arrival time, etc. are not provided for the bus users because the proper bus arrival time predictive models are not used yet in most of the cities operating the bus information system, including the metropolitan City of Ulsan. Thus, the purpose in this study is to investigate real-time bus traffic characteristic data for identifying the bus operation characteristics on the arterial under the study in the metropolitan City of Ulsan, analyze real-time bus traffic characteristic data on the ID locations of the arterial under the study, construct the optimal unit segment models for the unit segments which are the bus stop, node and travel section using the exponential smoothing, weighted smoothing and Kalman Filter methods, respectively, and finally suggest the optimal integrated model for predicting the real-time bus arrival time at the bus stop of the arterial under the study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.44-54
• /
• 2006

The share rate of bus mode has been decreasing continuously. To solve this problem, the local governments implement Bus Management System(BMS) or Bus Impormation System(BIS). In operating the public transportation preferential policy, it is very important to verify the effectiveness of the projects. This study performed the effectiveness of BMS through before and after study based on the field data. Moreover, this study analyzed the factors affecting to BMS. We anticipate that the results of this study would be useful reference in local government's BMS planning.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.461-469
• /
• 2011

Considering the traffic condition of railroad 'KTX' links to lack of service's punctuality in nation's small/ medium cities, design guidelines with practical railroad transportation policies in terms of convenient railroadbus connection and improving comfortable ride is suggested. Following the guideline and policies, operational requirements of current railroad-bus connection system, the system's design consideration, and transportation policies and laws in relation to the bus operating companies should be analyzed to decide the practicality of the railroad-bus connecting infrastructure. Also, in order to achieve practical railroad-bus connection, connecting buses' design guideline is combined with suggested optimization method of the practicality transportation system. Lastly, the design guideline of buses as 'links,' and railroad transportation policies concerning the operation of connecting bus system for nation's small/medium cities are suggested.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.71-81
• /
• 2008

In this paper, we propose a novel Globally Asynchronous, Locally Dynamic System(GALDS) bus and demonstrate its performance. The proposed GALDS bus is the bidirectional multitasking bus with the segmented bus architecture supporting the concurrent operation of multi-masters and multi-slaves. By analyzing system tasks, the bus architecture chooses the optimal frequency for each If among multiples of bus frequency and thus we can reduce the overall power consumption. For efficient data communications between IPs operating in different frequencies, we designed an asynchronous and bidirectional FIFO based on an asynchronous wrapper with hand-shaking interface. In addition, since systems can be easily expandable by inserting bus segments, the proposed architecture has advantages in IP reusability and structural flexibility As a test example, a four-segment bus haying four masters and four slaves were designed by using Verilog HDL. We demonstrate multitasking operations with read/write data transfers by simulation when the ratios of operation frequency are 1:1, 1:2, 1:4 and 1:8. The data transfer mode is a 16 burst increment mode compatible with Advanced Microcontroller Bus Architecture(AMBA). The maximum operation latency of the proposed GALDS bus is 22 clock cycles for the bus write operation, and 44 clock cycles for read.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.75-83
• /
• 2004

July 1, 2004 Seoul Metropolitan city is operating the Median Bus Lane System on Gangnam Main Street, Seongsan-Susaek-ro (Road) and Dobong- Mia-ro (Road) as one of the systematic reorganizations in public transportation. It has been assumed that there was an improvement in the speed of bus considering that the Median Bus Lane System practiced on Cheonho-daero (Main Street) since 1996 have had 35km/h on the average. If the Median Bus Lane goes into effect, there is a problem with the left turn on the crossroad. The buses go on the existing first lane so that the left fuming cars cannot help but turn left on the second lane. In case that the Median Bus Lane is put into practice, the left turn on the crossroad should not be allowed. However, if the left turn is not permitted on the crossroads in the aforementioned main streets, neighboring residents will complain about it and there will be some difficulties in finding other detour. On the premise that the prevalent left turn on the crossroads is allowed while the Median Bus Lane is being put into practice, this study suggests the separation of a stop line between buses and other vehicles as a way of fuming left in a safe manner and a way to calculate the appropriate distance.