• 한국의류학회지
• /
• 제30권4호
• /
• pp.607-614
• /
• 2006

This study was carried out to suggest the optimal spinning process condition which provides a proper range of tenacity and biodegradability as textile fibers. The effects of the melt spinning speed and heat treatment on the mechanical property and biodegradability of polylactic acid fiber were investigated. Polylactic acid(PLA) was spun in a high spinning speed of $2000{\sim}4000m/min$. Each specimen was heat-treated at $100^{\circ}C$ during 30min. Mechanical properties such as breaking stress and the degree of crystallinity were evaluated using WAXS. Biodegradability was estimated from the decrease of breaking stress, weight loss, and the degree of crystallinity after soil burial. Experimental results revealed that heat treated specimens showed higher breaking stress than untreated specimens, but the increase was not so high as was expected from the remarkable change of crystallinity by heat treatment. It was concluded that breaking stress was more influenced by spinning speed than heat treatment. In the soil burial test, however biodegradability calculated from weight loss was more influenced by heat treatment than spinning speed.

• 한국지형학회지
• /
• 제25권4호
• /
• pp.63-75
• /
• 2018

The lower marine terrace 1 and 2 surfaces distributed between Ulsan and Pohang coast in the southeastern coast of the Korean penninsula have been correlated with MIS 5e and 5a (or 5c) by amino acid dates, 14C dates, wide-spread tephra correlation and pollen analysis respectively. In this study, to test the reliability of the OSL method for the estimation of the numerical burial age of marine sediment deposits, we analyzed the samples from the marine terraces which have been known as typical marine terraces formed during MIS 5e and MIS 5a in the above-mentioned coast. The burial ages of the marine deposit of the lower marine terrace 1 and 2, with paleoshoreline altitudes of 18m to 19m and 10m to 11m respectively, both showed about the same age of 60 ka BP. The lower marine terraces 1 and 2, however, were divided into two terrace surfaces by a clear terrace cliff. Besides, the OSL dates of the lower and upper parts of the lower marine terrace 2 of the Bonggil coast showed the reversed burial ages. In the lower marine terrace 1 of the Sanhari coast, almost the same burial ages were derived from both the lower part (marine rounded gravel layer) and the upper part (terrestrial angular gravel layer) of the terrace deposit. Therefore, at the present time, judging from only the OSL dates measured in this study, it could be argued that the OSL method is not the best for the estimation of forming periods of the lower marine terraces 1 and 2 and their classification.

• 자원환경지질
• /
• 제20권3호
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• 복식문화연구
• /
• 제11권6호
• /
• pp.902-912
• /
• 2003

The purpose of this research was two-folds; first, to investigate the type of soil contaminated in the Hunsang excavated from the Milchang-gun burial of Mapo for the purpose of proposing the adequate washing method, second, to utilize the chemical degradation result obtained from the previous research to identify the natural dye source used in the Hunsang textile. The application of KS K0251 test showed that the soil was more oleophilic than hydrophilic thus indicating that wet cleaning was more adequate that dry cleaning for the removal of Hunsang soil. The GC-MS result of the Hunsang extraction showed dimethyl phthalate and 2,4-di-tert-butylphenol as its degradation product and these coincided with the degradation products from the alizarin standard data of previous research. The comparison of the two suggested that it is likely that Hunsang was dyed with madder which has alizarin as its major chromophore.

• 공업화학
• /
• 제4권1호
• /
• pp.178-187
• /
• 1993

전분-폴리에틸렌 복합필름을 활성오니시험과 토양매립시험에 의해 시험하였으며, 시험동안 전분의 분해에 의해 필름의 형태가 변함을 관찰할 수 있었다. 매트릭스로 사용한 폴리에틸렌은 첨가한 산화촉진제의 작용에 의해 산화되어 가교 및 분해가 모두 일어남을 알 수 있었다. 그러나 토양매립시험 결과로 볼 때 산화촉진제로 옥수수에서 추출한 오일을 사용하였을 경우 수평균분자량 및 중량평균분자량이 모두 감소하고 분자량 분포가 증가하는 분해반응이 우세하게 일어남을 알 수 있었다.

• 기술사
• /
• 제44권1호
• /
• pp.44-47
• /
• 2011

Huge amount of energy produced by an underground nuclear test is released into the surrounding rock. Depending on the properties of the bed rock surrounding the detonation and overlaying it a variety of effects can occur. At some particular depth the increasing amount of material thrown upward is exactly balanced by the decreasing fraction escaping the crater, the crater volume reaches to a maximum. This depth is called the optimum depth of burial and varies somewhat with the geology of the site, being greater for less dense and structurally weaker material.

• 한국지반환경공학회 논문집
• /
• 제24권12호
• /
• pp.61-67
• /
• 2023

도심지 지하에 위치하며 고온, 고압조건에서 운영되는 열수송관은 파손 시 인적, 경제적으로 대규모 피해가 발생할 수 있다. 파손을 사전에 예측하기 위해 기존 파손이력과 설비이력을 분석하여 파손빈도와 상관관계를 가지는 독립변수를 도출하고, 각 변수를 활용한 단순회귀분석 변형모델이 현장에 적용되고 있다. 다만, 모델에 적용되는 독립변수간 상관관계가 클수록 변수간 독립성이 훼손되어 모델의 신뢰성이 낮아진다. 본 연구에서는 상호 연관성을 가지는 것으로 판단되는 관경, 매설깊이, 감시시스템 절연레벨, 감지선의 단선 또는 단락의 독립성을 검정하여 파손빈도 추정모델에 적용하기 위해 필요한 변수간 결합 및 범주 설정 방안을 도출하였다. 독립성 검정을 위해 연속형 변수인 관경과 매설깊이는 각각 3개의 범주, 감시시스템 절연레벨은 2개의 범주로 변환하였으며, 범주형 변수인 감시시스템 감지선 상태는 범주를 그대로 2개로 유지하였다. 독립성 검정 결과, 관경과 매설깊이간, 감시시스템 절연레벨과 감지선의 단선 또는 단락간 유의확률이 유의수준(α = 0.05)보다 작아 상호간 상관관계가 큰 것으로 나타났다. 따라서 관경과 매설깊이를 하나의 변수로 결합하고 사전에 설정한 범주를 고려하여 결합 변수의 범주는 9개로 설정하였다. 감시시스템 절연레벨과 감지선의 단선 또는 단락 역시 하나의 변수로 결합하였으며, 감지선 상태가 단선 또는 단락인 경우 절연레벨값을 신뢰할 수 없으므로 결합 변수의 범주는 3개로 설정하였다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.454-466
• /
• 2017

North Korea intended to increase the power of its nuclear weapons and standardize warhead to be loaded in ballistic missiles through the $4^{th}$ and $5^{th}$ nuclear tests. In this study, three kinds of nuclear weapons that North Korea might have used in the $4^{th}$ and $5^{th}$ nuclear tests to achieve their technical goals were suggested. Monte Carlo modeling and various technical assessments have shown that boosted fission weapons are most likely to be used. Also, using the empirical formula considering the burial depth of explosion, we found that the yield of the $4^{th}$ and $5^{th}$ nuclear tests is at least twice as strong as that is expected it could be and the initial design power could reach 8kt before amplification. This means that North Korea has already achieved a substantial level of nuclear fusion technology through the $4^{th}$ test and has made a breakthrough in the miniaturization of nuclear weapons through the $5^{th}$ test. After two or three additional tests, North Korea is expected to have nuclear missiles equipped with nuclear warhead by 2020, which is expected to complete ballistic missile development.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.379-384
• /
• 1997

The biodegradable characteristics of poly-$\beta$-hydroxybutyrate(PHB) film by fun맥 and soil burial are Investigated. As the results of the American Standards for Testing and Materials(ASTM) method, the you of Aspergillus niger was apparent on the PHB containing plate. This suggests that PHB was utilized as the sole carbon source by Aspergillus niger and ASTM method may have applications as measuring means of biome gradability of polyhydroxyalkanoic acid(PHA). PHB film was studied by monitoring the time-dependant changes in weight loss of PHB film under 30% and relative humidity 80 % during pot-test. As the results of pot-test, PHB film was decomposed about 87 % in 30 days by soul microorganisms. PHB film was more slowly degraded than PHB/HV film.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.221-235
• /
• 2015

A series of laboratory model tests were conducted to investigate the effects of buried pipes location on the bearing capacity of strip footing in cohesionless soil. The variables examined in the testing program include relative density of the sand, loading rate of tests, burial depths of pipe and horizontal distance of pipe to footing. The test results showed a significant increase in bearing capacities when embedment ratio of pipe and horizontal distance of pipe to footing were increased. Based on the test results, it can be concluded that the location of pipes and relative density of sand are main parameters that affect the bearing capacity of strip footing. However, loading rate has not considerable effect on bearing capacity.