• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.285-293
• /
• 2001

본 연구는 기존 경량기포콘크리트의 문제점 및 역학적 성질의 개선을 위하여 산업폐기물인 폐스티로폼을 사용하여 경량기포콘크리트를 제조하고, 그 역학적 성질을 조사 분석하기 위한 것으로, 현장에서 주로 사용하는 배합을 기초로 하여 폐스티로폼의 혼입율을 최대 40%까지 단계별로 혼입하여 실험을 진행하였다. 또한 배합조건에 따른 경량기포콘크리트의 역학적 특성에 관한 상관관계를 분석하고자 하였다. 실험결과 폐스티로폼의 혼입율이 증가할수록 압축강도 증진에 효과적인 것으로 나타났으며, 현저한 흡수율 개선의 효과를 확인하였다. 그러나 플로우값의 경우 혼입율이 증가하면서 감소하여 해결해야 할 과제로 나타났다. 또한 단위시멘트량의 증가에 따라 압축강도도 증가하는 경향을 보였으며, 물시멘트비의 변화에 따른 압축강도의 변화는 미미한 것으로 나타났다. 또한 재령별 압축강도에 있어서는 초기의 압축강도 확보 및 장기강도의 증진을 위한 연구가 지속되어야 할 것으로 나타났다. 결과적으로 폐스티로폼을 사용하여 경량기포콘크리트를 제조할 경우, 산업폐기물의 재활용이라는 측면 뿐만 아니라, 경제적이고 안정된 품질의 경량기포콘크리트를 생산할 수 있음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.93-98
• /
• 1993

In order to discuss the mechanical properties of fiber reinforced composites with fly ash, lime, gypsum and polymer emulsion-Stylene Butadiene Rubber Latex (SBR) , experimental studies on FRC were carried out. The kinds of fiber used in FRC are PAN-dervied and Pitch-derived carbon fiver, alkali-resistance glass fiber. As a test results, the flexural strength and tougthness of fiber reinforced fly ash. lime.gypsum cement composites are remarkably increased by fiber contents ,but compressive strength of the composites are influenced by kinds of fiber more than by fiber contents. Also, addition of a polymer emulsion (SBR) to the composites decreased the bulk specific gravity, but compressive and flexural strengths, toughness of the composites are not influenced by it, are considerably improved by increasing fiber contents.

• 한국세라믹학회지
• /
• 제14권4호
• /
• pp.236-241
• /
• 1977

Three kinds of specimen, consisting of the graded pyrophyllite particles alone, a substituent of 8 percent fire clay for the finer portion ($F_2$) of it, and 0.8 percent inorganic binder-added composite were prepared under the following conditions respectively; moisture content=4.5~5.0%, forming pressure=250kg/$\textrm{cm}^2$ and sintering temperature=1, 000~1, 30$0^{\circ}C$. The various properties such as modulus of rupture, apparent porosity, bulk specific gravity, pore size and pore distributiion were measured in order to collaborate with sintering phenomena. The results obtained are as follows: (1) Apparent porosity isgradually decreased with rising the sintering temperature to 1, 25$0^{\circ}C$. (2) The binder-added specimen showed the lowest value in porosity. (3) The optimum sintering temperature of specimens was considered to be 1, 25$0^{\circ}C$. (4) The wider differences between pore volumes of specimens could be obtained by method of mercurypenetration porosimeter than by the conventional method for porosity.

• 지질공학
• /
• 제2권1호
• /
• pp.36-46
• /
• 1992

암석의 풍화 등급 정량화의 한 시도로써 각종 물리적 특성치의 변화 양상을 추적하고 이를 기존의 육안이나 현미경 관찰에 의한 풍화등급과 상호 비교 분석하였다. 이용된 물리적 특성치는 비중, 공극율, 초음파 종파속도 및 일축압축 강도였으며, 암석 관찰에 의한 풍화등급과의 상관은 공극율과 종파속도가 비중과 일축압축 강도에 비하여 상대적으로 좋은 상관도를 보여 심한 암상 차이만 조정된다면 공극율과 종파속도가 알려지고 있는 이상으로 효과적인 퐁화기준이 될 수 있을 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.343-349
• /
• 1994

The purpose of this study is to investigate the mechanical properties of floor slab structures with high-strength and lightweight CFRC panel using fly ash, PAN-derived and Pitch-derived carbon fiber. As a result, the flexural strength of CFRC is remarkably increased by CF contents, but compressive strength of the CFRC is not so increased as flexural strength. The bulk specific gravity is influenced by FA contents more than by CF contents, The compressive strength and the flexural strength are increased by FA contests, but decreased the case of 30% of contents. In order to increasing the flexural-carrying capacity of floor slab structures, it is recommended that the shape of anchor for reinforcement is required type-C and the spacing of anchor is required below 60mm.

• Advances in environmental research
• /
• 제1권4호
• /
• pp.305-321
• /
• 2012

This study entails establishing reference standard sand in Nigeria for engineering and geoenvironmental research work. Sands from four geographical locations in southwestern Nigeria were examined for baseline geotechnical and mineralogical properties. A total of sixteen sand samples were collected. The samples were air dried and subjected to tests in accordance with standard specifications. The tests carried out were: specific gravity, grain size analysis, moisture content, bulk density, porosity, void ratio, chemical analysis, X-ray diffraction and Differential Thermal Analysis. The properties of the samples were compared with a standard (Ottawa sand in Illinois of the United States) in order to find out which of the four samples selected from southwestern Nigeria could serve as standard baseline sand. The results show that Igbokoda sand has geotechnical and mineralogical characteristics closest to Ottawa sand. It was therefore concluded that Igbokoda sand could be used as a standard baseline sand for research work in southwestern Nigeria and other parts of Nigeria since it needs little processing to bring it to the same level as standard baseline sand, like the Ottawa sand.

• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.207-215
• /
• 2002

본 연구는 기존 경량기포콘크리트의 문제점 및 역학적 성질의 개선을 위하여 산업폐기물인 폐스티로폼의 가공형태를 달리하여 기포콘크리트를 제조하고 그 역학적 특성의 변화를 구명해 봄으로써 현장타설 기포콘크리트의 효과적인 품질관리를 위한 자료를 제공하고, 현장 작업자에게 필요한 실험값을 제공하는 것을 목적으로 한다. 폐스티로폼은 지름이 3~5mm의 둥근형태를 유지한 것(Type A)과 1~2mm의 작게 파쇄한 것(Type B)을 사용하여 그 역학적 특성 변화를 고찰하였으며, 연구결과 Type A의 경우 흡수율의 개선과 경량성 및 단열성 향상에 유리한 것으로 나타났으며, Type B의 경우는 높은 압축강도를 나타내나 겉보기 비중이 증가하고 Type A에 비하여 플로우, 흡수율, 단열성에서 Type A보다 낮은 성능을 나타냈다. 그러나 이러한 결과로부터 폐스티로폼의 가공형태에 따른 것으로 폐스티로폼을 사용하지 않은 것보다는 적당량을 혼입하여 사용하는 것이 현장타설 기포콘크리트의 물리적 성능을 향상시키는데 효과적임을 알 수 있었다. 결과적으로 폐스티로폼을 사용하여 현장타설 기포콘크리트를 제조할 경우 산업폐기물의 재활용이라는 측면과 함께 보다 우수한 성능의 기포콘크리트 생산이 가능함을 확인하였다.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.35-44
• /
• 1976

The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.

• Advances in concrete construction
• /
• 제13권4호
• /
• pp.291-305
• /
• 2022

The present investigation deals with the production of the innovative lightweight fly ash angular aggregates (FAA) first time in India using local class 'F' fly ash, its characterization, and exploring the potential for its utilization as alternative coarse aggregates in structural concrete applications. Two types of aggregates are manufactured using two different kinds of binders. The manufacturing process involves mixing fly ash, binder, and water, followed by the briquetting process, sintering and crushing them into suitable size aggregates. Tests are conducted on fly ash angular aggregates to measure their physical properties such as crushing value, impact value, specific gravity, water absorption, bulk density, and percentage of voids. Study shows that the physical parameters are significantly enhanced as compared to commercially available fly ash pellets (FAP). The developed FAA are used in concrete vis-à-vis conventional granite aggregates and FAP to determine their compressive, split tensile and flexural strengths. Although being lightweight, the strength parameters for concrete containing FAA are well compared with conventional concrete. This might be due to the high pozzolanic reaction between fly ash angular aggregates and cement paste. Also, RCC beams are cast and the load-deflection behaviour and ultimate load carrying capacity signify that FAA can be suitably used for RCC construction. Hence, the utilization of fly ash as angular aggregates can reduce the dead load of the structure and at the same time serves as a solution for fly ash disposal and mineral depletion problem.

• 한국식품저장유통학회지
• /
• 제22권5호
• /
• pp.652-659
• /
• 2015

본 연구는 국내원맥 중 백중밀 및 조경밀의 함수율 9~30%(w.b.) 범위내에서의 물리적 특징 중 산물밀도, 동안식각, 비중, 천립중, 장축길이, 단축길이, 두께 및 면적을 분석하여 함수율간의 상관관계를 구명함으로써 국내밀의 체계적인 수확 후 관리 중 정선, 선별, 이송, 저장 및 가공공정에서의 설계공정 및 기초자료로 활용하고자 연구하였다. 함수율 9~30%(w.b.) 범위내에서의 백중 및 조경밀의 산물밀도는 함수율이 증가할수록 서서히 감소하였으며, 백중밀은 $754kg/m^3$에서 $664kg/m^3$로 감소하였고, 조경밀은 $776.1kg/m^3$에서 $660.0kg/m^3$로 감소하였다. 비중 또한 함수율이 증가할수록 서서히 감소하였으며, 백중밀의 경우 1.2950에서 1.2265로 조경밀은 1.3379에서 1.2671로 측정되었다. 반면에 천립중 및 동안식각은 함수율이 증가할수록 점차 증가하였으며, 동안식각은 함수율 20%(w.b.)이상부터는 거의 변화가 없었다. 천립중은 백중밀보다 조경밀이 크게 측정되었으며 그 값은 32.26~41.51 g(백중밀) 및 45.30~63.07 g(조경밀)로 조경밀이 현저히 크게 측정되었다. 함수율에 따른 장축길이, 단축길이, 두께 및 면적은 함수율이 증가할수록 점차 증가하였다. 백중밀의 장축길이는 6.42 mm에서 7.20 mm로 조경밀은 8.71 mm에서 9.15 mm로 증가하였고, 단축길이 역시 2.90~3.49 mm(백중밀) 및 4.12~4.43 mm(조경밀)으로 증가하였으며, 두께 2.94~3.20 mm(백중밀) 및 3.29~3.63 mm(조경밀), 면적은 $14.13{\sim}19.44mm^2$(백중밀), $27.75{\sim}31.25 mm^2$(조경밀)로 각각 측정되었다. 이로써 함수율에 따른 우리밀의 물리적 특징이 구명되었으며, 이는 우리밀에 적합한 건조저장시설 및 수확 후 관리모델 개발에 도움이 될 것으로 판단된다.