• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.505-508
• /
• 2015

Soil bulk density is a key parameter for soil physical property. Much root placed in rhizosphere soil lump, especially in grassland and orchard, makes it difficult to measure soil bulk density. This experiment was carried out to countermeasure the above drawbacks. Volume check apparatus using water-filling method was made of acryl for higher accuracy in bulk density measurement. 10 types of land cover, including bare, tall fescue, rye, and soybean, were used for determining the relationships between root and bulk density. In this study, higher root volume resulted in higher differences in bulk density between in-situ core soil and root-ridded core soil, which indicated the volume check apparatus through water-filling could be useful for increasing the accuracy of bulk density of soils with much root.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.1-10
• /
• 2003

A computer simulation was carried out to determinate the optimum capacity of bulk type trailer which is used as a tractor attachment. Soil physical properties. such as soil moisture content. bulk density, soil hardness and soil texture were measured in the 10 major rice production area for computer simulation. Mathematical model which include soil physical properties and vehicle factor was used for computer simulation. Most of the soil texture of the investigated area was silty loam. Soil moisture content ranged between 30 and 40% mostly. Soil bulk density was in the range of 1.500 to 1.700 kg/㎥. Soil hardness ranged between 1 to 18 kg/$\textrm{cm}^2$. Soil hardness incorporate the effects of many soil physical properties such as moisture content texture and bulk density, and so the range of soil hardness was greater than any other physical properties. The capacity of bulk type trailer was above 3000 kg$_{f}$ fer the most of the investigated area. and mostly in the range of 4000 to 6000 kg$_{f}$ depending upon the slip. But for the soft soil area such as Andong and Namyang. tractor itself had mobility problem and showed minus trailer capacity for some places. For this area. the capacity of bulk type trailer ranged between 1000 and 2000 kg$_{f}$ mostly so bulk type trailer should be designed as a small capacity compared to the other area.ared to the other area. area.

• 한국토양비료학회지
• /
• 제50권5호
• /
• pp.482-488
• /
• 2017

The measurement based on reliable standard operating procedures (SOPs) is important for consistent information. The objective of this study is to investigate reliable SOPs of soil physical methods, including core method for bulk density, Yamanaka hardness, and air permeameter method for air permeability. The coefficients of variation in bulk density (core method), Yamanaka hardness, and air permeability were ranged of 1~6%, 8~13%, and 10~84%, respectively. The variation in situ measurement such as bulk density, hardness, and air permeability due to spatial variability at measuring site was larger due to the number of replicates, organic matter content, and soil texture. Nevertheless, air permeability had different values as different number of replicates, and thus, it is thought that more replicates can result in higher reliability. It suggested that investigation of soil physical properties for the target sites should required to consider about soil texture, organic matter content, and number of replications before measurement. In conclusion, core sampling for bulk density measurement in upland soil recommended to perform in 3 repetitions with 2 inch core, and 3 inch core sampling for higher organic matter content.

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.628-633
• /
• 2015

It is necessary to assess soil physical properties and crop growth treated by compaction to establish the soil management standard. This study evaluated the bulk density, strength and crop growth after subsoil compaction for sandy loam and loam on the field in Suwon, Korea. The treatments were compaction and deep tillage. Sandy loam and loam were classified to coarse soil and fine soil, respectively, depending on clay contents. In coarse soil, bulk density of compacted plot was 8~17% greater than control and deep tilled plot. The root growth was worse in compacted plot compared with control. In fine soil, plow pan was not observed in deep tilled plot with 5~19% smaller bulk density than compacted plot and control. Deep tillage improved the crop growth. The soil physical properties by compaction were dependent on clay content and crop growth limit depended on the traffic driving.

• 한국조경학회지
• /
• 제28권6호
• /
• pp.77-83
• /
• 2001

The purpose of this study is to provide the fundamental material and information for the plant maintenance after rooftop planting through physiochemical characteristics. The characteristics of artificial soils after rooftop planting from 1993 to 1999 was investigated. Fourteen investigation areas were selected from 4 cities(2 areas selected by each year). The analysis of the circumstances of the areas, the physical characteristics, and the chemical characteristics of the soil were conducted. The artificial soil pH ranged 5.26∼7.40 showing that after construction the soil pH tended to decrease. The soil bulk density of the site was lowest in 1999, 0.15g/㎤, and used to increase toward 1993. We found the fact that the soil bulk density increased gradually after rooftop application . The coefficients of permeability of the soils range from 0.016 to 0.052 cm/sec, which seemed to be in good permeability level. The artificial soils had relatively high water moisture capacity of 62.69∼71.36%. The soil organic matter content of the artificial soils ranged from 0.43 to 1.34%. The exchangeable caution concentration in the artificial soil ranged, Na, 2.36∼4.71mg·{TEX}$kg^{-1}${/TEX}, Mg 0.88∼2.84mg·{TEX}$kg^{-1}${/TEX},K 2.97∼9.61 mg·{TEX}$kg^{-1}${/TEX}, and Ca 9.39∼28.23 mg·{TEX}$kg^{-1}${/TEX}. The amount of total N ranged from 0.003 to 0.286% in study sites. Soil chemical properties varied year to year and showed little tend. The research results showed that some characteristics of the artificial soil were changed after rooftop planting, i.e., soil pH and soil bulk density. Soil bulk density had a negative relationship with the coefficient of permeability, showing that the drainage condition might be limited after some period. This study suggests that a diversity of the research in the changes of the plant growth basis on the areas after construction.

• 한국토양비료학회지
• /
• 제47권4호
• /
• pp.225-234
• /
• 2014

This study was carried out to investigate the sustainable agriculture of no-tillage technique including recycling of the ridge and the furrow of a field for following crops in Korea. No-tillage systems affect soil physical properties such as three phase (solid, liquid, and air phase) and distribution of soil granular. Solid ratio of subsoil in 3-year of no-tillage (NT) treatment was remarkably lower than that in conventional (CT, 2-year of no-tillage + 1-year of tillage) treatment, while air ratio of subsoil in NT remarkably increased. Bulk density of subsoil in NT remarkably decreased. Porosity of subsoil in NT remarkably increased. Deviation of air phase, bulk density, and porosity of top soil and subsoil in NT remarkably decreased in NT compared with CT. Solid phase ratio and liquid phase ratio in NT and CT had positive (+) correlation. Solid phase ratio and air phase ratio in NT and CT had negative (-) correlation, also liquid phase ratio and air ratio had negative (-) correlation. Bulk density and liquid ratio in soil had positive (+) correlation at top soil and subsoil in NT. Bulk density and air ratio in soil had negative (-) correlation in NT and CT. Porosity and liquid phase ratio had negative (-) correlation, r =1), the significant value was lower in NT than in CT. Porosity and air phase ratio had positive (+) correlation (r =1).

• 한국토양비료학회지
• /
• 제22권3호
• /
• pp.221-227
• /
• 1989

토성(土性)이 다른 두 토양(土壤)의 압밀상태(壓密狀態)가 대두(大豆)의 근생장특성(根生長特性)과 양분(養分)의 흡수기능처리(吸收機能差異)를 알아보기 위하여 용적밀도(容積密度)와 수분상태(水分狀態)를 달리한 Core에서의 유근신장(幼根伸長)과 용적밀도(容積密度)를 달리하여 pot재배(栽培)하였을 때 근(根)의 총(總)길이와 표면적(表面積), 근반경(根半徑) 및 양분(養分)의 흡수속도(吸收速度)를 조사(調査)한 결과(結果) 다음과 같다. 1. 대두(大豆)의 유근신장(幼根伸長)은 용적밀도(容積密度)가 낮을수록 빨랐으며 양토(壤土)에서는 토양수분(土壤水分) 상태(狀態)가 - 4bar 이하(以下)에서, 사양토(砂壤土)에서는 - 1bar 이하(以下)에서 급격(急激)히 감소(減少)하였다. 2. 유근(幼根)의 신장(伸長)은 ELE경도계(硬度計) 토양강도(土壤强度) 2.0 이상(以上)에서 급격(急激)히 감소(減少)하였으며, 근신장속도(根伸長速度)와 토양강도간(土壤强度間)에는 2차식(次式)으로 표시(表示)되었다. 그러나 사양토(砂壤土)에서 -10bar이하(以下)의 토양수분상태(土壤水分狀態)에서는 경도(硬度)에 관계(關係)없이 근신장속도(根伸長速度)가 낮았다. 3. pot재배시험(栽培試驗) 결과(結果), 뿌리의 총(總)길이는 용적밀도(容積密度)가 $1.2g/cm^3$인 양토(壤土)에서 가장 길었으며, $1.4g/cm^3$인 사양토(砂壤土)에서 가장 짧았다. 세근(細根)의 평균직경(平均直徑)은 사양토(砂壤土)에서 생육(生育)한 것이 양토(壤土)에서 생육(生育)한 것보다 굵었다. 뿌리의 총표면적(總表面積)은 용적밀도(容積密度)가 낮을수록 넓었으며, 양토(壤土)에서 사양토(砂壤土)보다 넓었다. 4. 양분(養分)의 흡수량(吸收量)은 건물생산(乾物生産)이 많은 양토(壤土)에서 많았다. 단위(單位)뿌리표면적당(表面積當) 흡수속도(吸收速度)는 질소(窒素)가 양토(壤土)에서 $597{\sim}753n\;mole/day{\cdot}cm^2$, 사양토(砂壤土)에서 $222{\sim}365n\;mole/day{\cdot}cm^2$이었으며, 용적밀도(容積密度)가 높은 토양(土壤)에서 높은 값을 보였다. K는 $99{\sim}175n\;mole/day{\cdot}cm^2$ P는 $26{\sim}46n\;mole/day{\cdot}cm^2$이었고, Ca와 Mg는 각각(各各) $175{\sim}230n\;mole/day{\cdot}cm^2$, $163{\sim}205n\;mole/day{\cdot}cm^2$의 범위(範圍)를 보였으며 토양간(土壤間)의 차이(差異)는 질소(窒素)보다 적은 경향(傾向)이었다.

• 한국토양비료학회지
• /
• 제30권1호
• /
• pp.51-55
• /
• 1997

Three soils, sandy loam, loam and silty clay loam, were selected and three inches soil cores with 4 bulk density(BD) levels were made by compressing the soils wetted with 3 levels water. Mechanical and water characteristics were measured and analyzed the mechanical resistance limiting water, available water and least-limiting water range. Mechanical resistance limiting water(MRLW) were appeared at higher bulk density than $1.6Mg/m^3$ in sandy loam, and $1.4Mg/m^3$ in loam and silty clay loam. The least-limiting water ranges were sharply decreased at the bulk density $1.6Mg/m^3$ in sandy loam and loam, $1.4Mg/m^3$ in silty clay loam. There were big deferences between available water contents and least limiting water ranges in finer texture and higher bulk density soils.

• 한국초지조사료학회지
• /
• 제11권1호
• /
• pp.22-29
• /
• 1991

This study was experimented to obtain the basic information on the changeable aspect and improvement of soil fertility in newly-reclaimed sloped land. Silage corn was cultivated under the six different treatments for 4 years. The relation between the amount or ratio of annual changes of soil physico-chemical properties and yield of silage corn were analyzed. Soil bulk density was decreased in 3rd year at topsoil, but that decreased in 4th year at subsoil. Soil organic matter also decreased in 2nd year at topsoil, and decreased continuously at subsoil. Bulk density and hardness of soil depths showed significant negative simple correlation with dry matter yield and cation exchange capacity showed positive. Correlation coefficient of chemical properties with dry matter yield were low. The range of annual changes of moisture percent, hardness and organic matter were wider than the other properties. The significantly different of physical properties were higher than the chemical properties, and those of topsoil were higher than subsoil. According to multiple regression between yield and physico-chemical properties of subsoil, bulk density and cation exchange capacity were in the greatest contribution at the variations, but bulk density was greatest at the ratios.