• Journal of Microbiology and Biotechnology
• /
• 제18권12호
• /
• pp.1966-1974
• /
• 2008

A typical tropical soil from the northeast of Brazil, where an important terrestrial oil field is located, was accidentally contaminated with a mixture of oil and saline production water. To study the bioremediation potential in this area, molecular methods based on PCR-DGGE were used to determine the diversity of the bacterial communities in bulk and in contaminated soils. Bacterial fingerprints revealed that the bacterial communities were affected by the presence of the mixture of oil and production water, and different profiles were observed when the contaminated soils were compared with the control. Halotolerant strains capable of degrading crude oil were also isolated from enrichment cultures obtained from the contaminated soil samples. Twenty-two strains showing these features were characterized genetically by amplified ribosomal DNA restriction analysis (ARDRA) and phenotypically by their colonial morphology and tolerance to high NaCl concentrations. Fifteen ARDRA groups were formed. Selected strains were analyzed by 16S rDNA sequencing, and Actinobacteria was identified as the main group found. Strains were also tested for their growth capability in the presence of different oil derivatives (hexane, dodecane, hexadecane, diesel, gasoline, toluene, naphthalene, o-xylene, and p-xylene) and different degradation profiles were observed. PCR products were obtained from 12 of the 15 ARDRA representatives when they were screened for the presence of the alkane hydroxylase gene (alkB). Members of the genera Rhodococcus and Gordonia were identified as predominant in the soil studied. These genera are usually implicated in oil degradation processes and, as such, the potential for bioremediation in this area can be considered as feasible.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.316-316
• /
• 2010

Thin films spin-coated from solvent solutions are characterized by solution parameters and spin-coating process. In this study, performance characteristics of polymer solar cells were investigated with changing solution parameters such as solvent and additives. The phase-separation between polymer and fullerene is needed to make the percolation pathway for better transportation of hole and electron in polymer solar cells. For this reason, cooperative effects of solvent mixtures adding additives with distinct solubility have been studied recently. In this study, chlorobezene, 1, 2-dichlorbenzene, and chloroform were used as solvent. 1, 8-diiodoctaned and 1, 8-octanedithiol were used as additives and were added into poly(3-hexylthiophene-2, 5-diyl)/[6, 6]-phenyl C61 butyric acid methyl ester (P3HT/PCBM) blends. Pre-patterned ITO glass was cleaned using ultrasonication in mixed solvent with ethyl alcohol, isopropyl alcohol and acetone. PEDOT:PSS was spin-coated on to the ITO substrate at 3000rpm and was baked at $120^{\circ}C$ for 10min on the hotplate. The prepared solution was spin-coated at 1000rpm and the spin-coated thin film was dried in the Petri dishes. Al electrode was deposited on the thin film by thermal evaporation. The devices were annealed at $120^{\circ}C$ for 30min. By adding 2.5 volume percent of additives into the chlorobenzene from that bulk heterojunction films consisting of P3HT/PCBM, the power efficiency (AM 1.5G conditions) was increased from 2.16% to 2.69% and 3.12% respectively. We have investigated the effect of additives in P3HT/PCBM blends and the film characteristics and the film characteristics including J-V characteristics, absorption, photoluminescence, X-ray diffraction, and atomic force microscopy to mainly depict the morphology control by doping additives.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.238-239
• /
• 2010

Dimethyl sulphoxide (DMSO) is one of the widely-used secondary dopants in order to enhance the conductivity of poly(3, 4-ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) film. In this work, we investigated the effect of DMSO doping in to PEDOT:PSS on the electrical performance of the bulk heterojunction photovoltaics consisting of poly(3-hexylthiophene-2, 5-diyl) and phenyl-C61-butyric acid methyl ester. Correlation between the power conversion efficiency and the mechanism of improving conductivity, surface morphology, and contact properties was examined. The PEDOT:PSS films, which contain different concentration of DMSO, have been prepared and annealed at different annealing temperatures. The mixture of DMSO and PEDOT:PSS was prepared with a ratio of 1%, 5%, 15%, 25%, 35%, 45%, 55% by volume of DMSO, respectively. The DMSO-contained PEDOT:PSS solutions were stirred for 1hr at $40^{\circ}C$, then spin-coated on the ultra-sonicated glass. The spin-coated films were baked for 10min at $65^{\circ}C$, $85^{\circ}C$, and $120^{\circ}C$ in air. In order to investigate the electrical performance, P3HT:PCBM blended film was deposited with thickness of 150nm on DMSO-doped PEDOT:PSS layer. After depositing 100nm of Al, the device was post-annealed for 30min at $120^{\circ}C$ in vacuum. The fabricated cells, in this study, have been characterized by using several techniques such as UV-Visible spectrum, 4-point probe, J-V characteristics, and atomic force microscopy (AFM). The power conversion efficiency (AM 1.5G conditions) was increased from 0.91% to 2.35% by tuning DMSO doping ratio and annealing temperature. It is believed that the improved power conversion efficiency of the photovoltaics is attributed to the increased conductivity, leading to increasing short-circuit current in DMSO-doped PEDOT:PSS layer.

• 한국해양학회지
• /
• 제25권4호
• /
• pp.189-204
• /
• 1990

태평양 클라리온-클리퍼톤 균열대 서부의 KODOS(Korea Deep Ocean Study)지역에 분포하는 망간단괴의 성인과 분포, 그리고 분포 원인을 규명하기 위하여 망간단괴와 퇴적물을 채취하여 화학 및 광물학적 분석을 하였다. 이 지역의 망간단괴는 Mn/Fe 비 가 크고 구리, 니켈, 아연, 마그네슘, 토도로카이트 함량이 높으며 표면조직이 거친 속성기원의 망간단괴(S-형 망간단괴)와 철, 코발트, 버나다이트 함량이 높고 표면조직 이 매끈한 수성기원의 망간단괴(S-형 망간단괴) 그리고 화학 및 광물조성과 표면조직 이 두 기원의 중간성격을 띄는 망간단괴(R-S-형 망간단괴)로 구분된다. 성인 및 부존 밀도 등의 특성에 따라 KODOS-89 지역은 크게 4지역으로 구분된다. 즉, 부존밀도가 10 kg/m$^2$이하이고 수성기원의 망간단괴가 분포하는 최북단지역, 부존밀도가 1 kg/m$^2$ 내 외이고 속성기원의 망간단괴가 분포하는 남부 지역, 그리고 부존밀도가 10 kg/m$^2$ 이 상으로 높고 수성기원의 망간단괴가 분포하는 해저산지역으로 구분된다. 이러한 망간 단괴의 분포특성은 주로 위도에 따른 수층의 생산성 및 해저지형의 차이에 의해 기인 되었다고 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.248-252
• /
• 2006

An investigation is reported on the coating of ZnS:Cu,Cl phosphors by $HfO_2$ using atomic layer deposition method. Hafnium oxide films were prepared at the chamber temperature of $280^{\circ}C$ using $Hf[N(CH_3)_2]_4\;and\;O_2$ as precursors and reactant gas, respectively. XPS and ICP-MS analysis showed the surface composition of coated phosphor powder was hafnium oxide. In FE-SEM analysis, the surface morphology of uncoated phosphors became smoother and clearer as the number of ALD cycle increased from 900 to 1800. The photoluminescence intensity for coated phosphors showed $7.3{\sim}13.4%$ higher than that of uncoated. The effect means that the reactive surface is uniformly coated with stable hafnium oxide to reduce the dead surface layer without change of bulk properties and also its absorptance is almost negligible due to ultrathin(nano-scaled) films. The growth rate is about $1.1{\AA}/cycle$.

• 미생물학회지
• /
• 제52권3호
• /
• pp.383-387
• /
• 2016

분열효모 Schizosaccharomyces pombe의 cdc31 유전자는 진화적으로 잘 보존된 $Ca^{2+}$-결합 centrin/CDC31 계열에 속하며 방추극체(spindle pole body)의 한 성분인 단백질을 암호화하고 있다. 이 논문에서는 S. pombe의 Cdc31 단백질이 방추극체뿐만 아니라 TREX-2 복합체의 구성인자로서 mRNA의 핵에서 세포질로의 방출에 영향을 미치는지 알아보았다. cdc31 유전자의 발현을 억제하면 생장 결함을 보였고, $poly(A)^+$ RNA도 핵 안에 축적되는 현상을 보였다. 한편 cdc31 유전자를 과발현시키면, 생장과 mRNA 방출에 결함을 보이진 않았지만 세포의 길이가 길어지는 형태를 보였다. Yeast two-hybrid 분석에서 Cdc31 단백질은 TREX-2 복합체의 또 다른 구성인자인 Sac3 그리고 Pci2와 상호작용을 하였다. 이와 같은 결과들은 S. pombe의 Cdc31 단백질도 역시 TREX-2 복합체의 구성인자로 mRNA 방출에 관여하고 있음을 시사한다.

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.86-94
• /
• 2009

Various types of multilayer coatings including Al/$Al_2O_3$ structure have been prepared on Nd-Fe-B permanent magnet to modify the morphology of the coating and to enhance the corrosion resistance of the magnet. Magnetron sputtering has been employed to make the multilayer coatings. $Al_2O_3$sputtering conditions were optimized in reactive sputtering by varying the deposition parameters. The formation of $Al_2O_3$ film was confirmed from the binding energy shift measured by electron spectroscopy for chemical analysis. 3 types of coating structures were designed and prepared by magnetron sputtering. The coating structures consist of (1) single Al coating, (2) modified coatings having oxide or plasma treated layer in the middle of coating structure, and (3) Al/$Al_2O_3$ multilayer coatings. Surface and cross-sectional morphologies showed that Al/$Al_2O_3$ multilayer grew as a layered structure, and that very compact Zone 3 like structure were formed. X-ray diffraction peak showed that the crystal orientations of multilayer coatings were similar to that of the bulk powder pattern. Hardness increased drastically when the Al thickness was around 1im in the Al/$Al_2O_3$ multilayer. From the salt spray test and pressure cooker test, it has been shown that the multilayer coatings showed good corrosion resistance compared to Al single or modified layer coatings.

• 한국주조공학회지
• /
• 제31권1호
• /
• pp.26-30
• /
• 2011

For the fabrication of bulk near-net-shape Ti-Ni-Cu shape memory alloys, consolidation of Ti-Ni-Cu alloy powders are useful because of their brittle property. In the present study, $Ti_{50}Ni_{30}Cu_{20}$ shape memory alloy powders were prepared by gas atomization and martensitic transformation temperatures and microstructures of those powders were investigated as a function of powder size. The size distribution of the powders was measured by conventional sieving, and sieved powders with the specific size range of 25 to $150\;{\mu}m$ were chosen for this examination. XRD analysis showed that the B2-B19 martensitic transformation occurred in the powders. In DSC curves of the as-atomized $Ti_{50}Ni_{30}Cu_{20}$ powders as a function of powder size, only one clear peak was found on each cooling and heating curve. The martensitic transformation start temperature($M_s$) of the $25-50\;{\mu}m$ powders was $31.5^{\circ}C$. The $M_s$ increased with increasing powder size and the difference of $M_s$ between $25-50\;{\mu}m$ powders and $100-150\;{\mu}m$ powders is only $1^{\circ}C$. The typical microstructure of the rapidly solidified powders showed cellular morphology and very small pores were observed in intercellular regions.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1113-1119
• /
• 2003

저온 박막 공정을 위해 비등점이 낮은 용매인 isopropanol을 사용하였고, 용질로 zinc acetate의 몰 농도를 0.3∼1.3 mol/l까지 변화시켜 sol을 합성하였다. Zn 농도 변화에 따른 ZnO 박막의 구조 및 광학, 전기적 특성을 분석하였다. XRD 측정에서 Zn의 농도가 0.7 mol/l 일 때 c-축으로 결정 배향성이 뚜렷하였다. SEM으로 박막의 표면 morphology를 관찰한 결과 0.7 mol/l 에서 균일한 표면층을 갖는 나노구조를 이루고 있었다. UV-vis. 측정을 통한 ZnO 박막의 광투과도는 Zn의 농도가 0.7 mol/l 이하에서 87%였으나, 1.0 mol/l 이상의 농도에서는 급격히 감소하였다. 이때 광 밴드갭 에너지는 3.07∼3.22 eV의 값을 나타내며, 벌크 ZnO의 특성과 유사하였다. 박막의 전기 비저항 값은 150 $\Omega$-cm로 Zn의 농도변화에 따라 큰 변화를 보이지 않았으며, I-V 특성분석에서 전형적인 ohmic contact 특성을 보였다.