• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.87-94
• /
• 1992

An analytical method has been presented for the study of the superplastic bulging process of sheet metal. Through this method, it is possible to obtain the optimum pressure-time curve for the superplastic forming and to predict the thickness distribution of bulged sheet metal with less computational cost than that by finite element analysis. Experiments have been performed to confirm the results of this analysis with Supral 150 sheets by adopting the computed optimum pressure-time curve. Good agreement between predictions and experimental data has been obtained for the bulged profile and its thickness distribution.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1217-1226
• /
• 1988

This paper shows an deformation behavior of steel cast slabs, which is used to prevent internal cracks of a slab in an unbending zone, in case of hot charge rolling(HCR) and hot direct rolling(HDR). The value of moving strand shell bulging between two supporting rollers under ferrostatic pressure has been computed in terms of creep and elastic-plasticity and for high strand surface temperature and high casting speed V=1.4-2.2m/min. The strain and strain rate distributions in solidified shell undergoes a series of bulging are calculated with boundary condition a very closed to continuous steel cast slabs productions.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.122-128
• /
• 2000

In this paper, a bulging condition which affect the quality of continuous casting steel was analyzed by using the numerical analytic method. First, solidification analyses were performed for each cooling zone by one-dimensional finite difference method. The bulging deformation of cast slab has been calculated with a two-dimensional elasto-plastic and creep finite element model. The adequacy of the model has been checked against the experimental results. From this study the effects of the process variables such as casting speed, cooling condition and roll pitch were examined. The results from these analyses would be able to apply to the design of continuous casting process.

• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.303-310
• /
• 2023

Electrohydraulic forming(EHF), one of the high-speed forming method, can supplement the weak point of previous forming process such as deep-drawing and electromagnetic forming. Indeed, EHF is time-consuming process during installing wire before experiment that hard to apply to industry. In this research, applying wireless electrode, the formability of SUS430 sheet was compared through EHF experiments using wire-installed electrode and the other, wireless. Although the power was a little lacking, the advantages of the experiment using wireless electrode could be confirmed with checking the optimal location of electrodes where the plasma is generated and comparing free-bulging height depending on former and later condition of electrodes with performing several single and multistage experiments for same voltage, 6 kV.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.49-54
• /
• 2002

The Finite Element Method is applied to the determination of the deformed bulge profile and strain distribution during upset forming of cylindrical billets. From the results of simulation, the bulging along the z-axis becomes more severe with increasing eight reduction, and with increasing friction at the die-material interface. The present method can be used for the simple prediction of the deformed shape and strain distribution in upset forging of cylindrical billets with dissimilar fictional conditions at the die-material interfaces.

• The monthly packaging world
• /
• s.280
• /
• pp.86-89
• /
• 2016

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.899-904
• /
• 2014

Thickness profiled blank is designed using optimization techniques for maximizing the bulged heights during the free bulging of Inconel 718. The thickness of the blank was described by the Bezier curve and the locations of the control points were used as the design variables for optimization. The maximization of the bulged heights within the limited strain range served as the objective function and constraints for optimization. The equivalent static loads method for non-linear static response structural optimization (ESLSO) was used and the result of the optimization revealed 22 increased bulged heights. A free bulging test using a blank with an optimized profile was conducted to verify the optimization process. The results were compared with those of numerical analysis in terms of bulged height and deformed shape.

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.1111-1116
• /
• 1988

Neurofibromatosis is very rare syndrome characterized by abnormal cutaneous pigmentation and numerous skin tumors was described by Smith in 1849, which is inherited as an autosomal dominant trait. Von Recklinghausen reported 2 cases of multiple skin and subcutaneous tumors in 1982. Malignant peripheral nerve tumors, although generally rare, are one of the most characteristic malignant tumors associated with Neurofibromatosis. We have experienced 3 cases of malignant Schwannoma in neurofibroma patients from 1982 to 1988 for 6 years at Thoracic and Cardiovascular surgery department, College of Medicine, Yonsei University, Seoul, Korea. l. One is 62 years old female who was taken total hysterectomy followed by irradiation treatment due to Uterine Carcinoma 21 years ago. She had a large bulging mass on left anterior chest wall and was taken enbloc resection of tumor including rib confirmed malignant Schwannoma. 2. Another is 18 years old female who had large bulging mass on right chest wall and pleural effusion in right thoracic cavity. Thoracentesis revealed a large amount of lymphocytes misdiagnosed of Tbc, pleurisy with Neurofibromatosis. We performed tissue biopsy on bulging mass and the specimen was confirmed malignant Schwannoma 2 months after first diagnosis of Tbc. pleurisy. She was not accessible to radical resection because of far advanced malignant Schwannoma at that time. 3. Third case is 28 years old male who was taken enbloc resection of tumor including rib due to Neurofibroma with Neurofibromatosis at M. hospital 6 months ago. But he had rapid growing mass at operation site again and taken tissue biopsy confirmed of malignant Schwannoma. He was not accessible to enbloc resection due to malignant Schwannoma extending to mediastinal structures.

• Journal of Mechanical Science and Technology
• /
• v.14 no.6
• /
• pp.633-644
• /
• 2000

Recently, in proportion to the increase of earthquake occurrence-frequency and its strength in the countries within the circum-pan Pacific earthquake belt, a concept of earthquake-proof design for huge structures containing liquid has been growing up. This study deals with the refinement of classical numerical approaches for the free vibration analysis of separated structure and liquid motions. According to the liquid-structure interaction, LNG-storage tanks exhibit two distinguished eigenmodes, the sloshing mode and the bulging mode. For the sloshing -mode analysis, we refine the classical rigid-tank model by reflecting the container flexibility. While, for the bulging-mode analysis, we refine the classical uncoupled structural vibration system by taking the liquid free-surface fluctuation into consideration. We first construct the refined dynamic models for both problems, and present the refined numerical procedures. Furthermore, in order for the efficient treatment of large-scale matrices, we employ the Lanczos iteration scheme and the frontal-solver for our test FEM program. With the developed program we carry out numerical experiments illustrating the theoretical results.

• Journal of Pharmacopuncture
• /
• v.13 no.2
• /
• pp.111-120
• /
• 2010

Objective: This study is to evaluate the effectiveness of the oriental medicine treatment on lumbar disc herniation. Subjects and Methods : The clinical analysis was done on 32 cases of patients with lumbar disc herniation diagnosed by lumbar CT scan. Patients who admitted In Cheongju Oriental Medicine Hospital from April 2007 to April 2008 were analyzed according to the distribution of sex, age, the period of disease, condition on admission, the symptom on admission, Admission day, the treatment efficacy at discharge day. Results : 1. The forties was the most, the acutest phase the most, the day of 8-14 days the most. 2. Multiple bulging disc in 37.5% of CT scan was the most common, followed by a single HNP was 28.1%. 3. Almost 81 % patients showed effective efficacy under VAS 3 at discharge day. 4. Single bulging and herniated disc were more short admission days than multiple bulging and herniated disc.